User manual

4
EN
RADIAL MITRE SAW 1900W - 210MM
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2-3
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always func-
tions properly. The operating instructions
and the accompanying documentation
must be kept in the vicinity of the device.
Intended use
The electro tool is intended as a stationary
machine for making straight lengthways and
crossways cuts in wood. Horizontal mitre angles
of -45° to +45° as well as vertical bevel angles of
-45° are possible.
Contents
1. Machine information
2. Safety
3. Mounting accessories
4. Operation
5. Service & Maintenance
1. MACHINE INFORMATION
Technical specifications
Mains voltage 230 V, 50Hz
Capacity 1900W
Machine class II (double insulated)
No load speed 4800/min
Saw blade measurement 210x30x2.8mm
Angle for mitring 45º (left and right)
Angle for bevelling 45º (only left)
Mitre saw maximum sawing capacity:
Mitre 0º, Bevel 0º 60x310mm
Mitre 45º, Bevel 45º 35x210mm
Mitre 45º, Bevel 0º 60x210mm
Mitre 0º, Bevel 45º 35x310mm
Weight 15 kg
L
pa
(sound pressure) 97+3 dB(A)
L
wa
(acoustic capacity) 110+3 dB(A)
Vibration level <2.5 m/s
2
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with a
standardised test given in EN 61029-1; it may be
used to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
• usingthetoolfordifferentapplications,orwith
different or poorly maintainted accessories,
may significantly increase the exposure level
• thetimeswhenthetoolisswitchedofforwhen
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping your
hands warm, and organizing your work patterns
Package contents
1 Dust adapter
1 Pair of safety glasses
1 Carbon brush set
1 Pair of earplugs
2 Side bars
1 Anti-tip over support
Check the machine, loose parts and accessories
for transport damage.
Features
Figs. 1, 2, 3, 4 and 5
1. On/off switch
2. On/off switch for laser
3. Unlock button (Blade protective cover)
4. Cover carbon brush
5. Lock-pin
6. Blade protective cover
7. Workpiece clamp
8. Guide fence
9. Knob adjusting saw angle
10. Locking knob
11. Locking paddle
12. Knob over sliding support