User manual

5
EN
it is correctly destroyed and replaced by an
approvedBS1363/3Afusedplugandthatthe
following wiring instructions are followed.
The wires in the mains cable are coloured in
accordance with the following code:
blue neutral
brown live
As the colours of the wires in the mains cable of
the unit may not correspond to the coloured
markings identifying the terminals in the plug,
proceed as follows:
- Thewirewhichiscolouredbluemustbe
connected to the terminal which is marked with
theletterNorcolouredblack.
- Thewirewhichiscolouredbrownmustbe
connected to the terminal which is marked with
the letter L or coloured red.
TECHNICAL DATA
 
Mainsvoltage V~ 230
Mainsfrequency Hz 50
Powerinput W 180
No-loadspeed min
-1
 12,000
Sanding surface mm 187 x 92
Protectionclass  IP20
Weight kg 1.42
NOISE AND VIBRATION
 
Sound pressure (L
pa
) dB(A) 76
Acoustic power (L
wa
) dB(A) 90
Uncertainty(K) dB(A) 3
Vibration m/s
2
 6.4
Uncertainty(K) m/s
2
1.5
2
Wear hearing protection.

The vibration emission level stated in this instruction
manual has been measured in accordance with a
standardisedtestgiveninEN60745;itmaybeused
to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- usingthetoolfordifferentapplications,orwith
different or poorly maintainted accessories,
maysignicantlyincreasetheexposurelevel
- thetimeswhenthetoolisswitchedofforwhen
it is running but not actually doing the job, may
signicantlyreducetheexposurelevel
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
yourhandswarm,andorganizingyourwork
patterns

Yournishingsanderhasbeendesignedfor
sanding wood, metal, plastics and painted
surfaces.
 1. On/offswitch
 2. Lock-onbutton
 3. Sandingpad
4. Sanding paper clamp
5. Grip
 6. Dustextractionconnection

4
Before assembly, always switch off the
machine and remove the mains plug
from the mains.



● Mountsandingpaper(7)withtherequired
grainsizeontothesandingpad(3).Makesure
that the perforation in the sanding paper (7)
corresponds with the perforation on the
sandingpad(3).

● Removethesandingpaper(7)fromthe
sandingpad(3).



● Openthesandingpaperclamps(4).
● Mountsandingpaper(7)withtherequired
grainsizeontothesandingpad(3).Makesure
that the perforation in the sanding paper (7)
corresponds with the perforation on the
sandingpad(3).
● Foldthesandingpaper(7)atbothends
aroundtheedgesofthesandingpad(3).
● Closethesandingpaperclamps(4)oneby
one.Makesurethattheendsofthesanding
paper (7) are clamped.