User Manual

6
EN

Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
SAFETY WARNINGS
1
WARNING
Read the enclosed safety warnings,
the additional safety warnings and
the instructions.
Failure to follow the safety warnings and
the instructions may result in electric
shock, re and/or serious injury.
Keep the safety warnings and the
instructions for future reference.
The following symbols are used in the user
manual or on the product:
1
Read the user manual.
2
Risk of personal injury.
3
Risk of electric shock.
4
Immediately remove the mains plug from
the mains if the mains cable becomes
damaged and during cleaning and
maintenance.
5
Wear safety goggles. Wear hearing
protection.
A
Wear a dust mask.
B
Caution: Laser beam! Do not look
directly into the laser beam. Do not point
the laser beam at humans or animals.
6
Risk of ying objects. Keep bystanders
away from the work area.
7
Double insulated.
Do not dispose of the product in
unsuitable containers.
9
The product is in accordance with the
applicable safety standards in the
European directives.
ADDITIONAL SAFETY WARNINGS FOR WALL
SLOTTERS
● Donotworkmaterialscontainingasbestos.
Asbestos is considered carcinogenic.
● Wearsafetygoggles,hearingprotectionandif
necessary other protective means, such as
safety gloves, safety shoes, etc.
● Beforeuse,removeallnailsandothermetal
objects from the wall.
● Beawareofhiddenpipesandwiringwhen
cutting slots into walls.
● Alwaysholdthemachinewithtwohands.
● Donotusethemachinewithouttheguard.
● Inspectthecuttingdiscsbeforeeachuse.
Donotusecuttingdiscswhicharebent,
cracked, or otherwise damaged.
● Makesurethatthecuttingdiscsareproperly
mounted.
● Makesurethatthecuttingdiscsrotateinthe
correct direction.
● Donotusethemachinewiththecuttingdiscs
facing upwards or to the side.
● Onlyusecuttingdiscsthataresuitableforuse
with the machine.
● Onlyusecuttingdiscswiththecorrect
dimensions.
● Donotuseotheraccessoriesthancuttingdiscs.
● Donotusethemachinewhenamaximumslot
depth is required that exceeds the maximum
slot depth of the cutting discs.
● Makesurethatyourhandsdonottouchthe
rotating parts.
● Alwaysworkinthecorrectworkingdirection
(see indication on the base).
● Letthemachinerunatnoloadinasafearea
aftermountingthecuttingdiscs.Ifthemachine
vibrates strongly, immediately switch off the
machine, remove the mains plug from the
mains, and try to solve the problem.
● Bewarethatthecuttingdiscscontinueto
rotate for a short period after switching off the
machine.Donotattempttobringthecutting
discs to a standstill yourself.
● Neverputthemachinedownonatableora
workbench before it has been switched off.
