Manualshelf

Operating Instructions and Installation Instructions

ManualsBrandsFermax ManualsIntercomsVDS SMILE MONITOR
11121314151617181920
Page 17
SMILE VDSSMILE VDS
SMILE VDSSMILE VDS
SMILE VDS
SMILE VDSSMILE VDS
SMILE VDSSMILE VDS
SMILE VDS
- : Decrease button selected with the cursor.
+ : Increase button selected with the cursor.
: This moves to the following digit.
: It restarts with the first digit.
5. Exit Programming: When you press  you exit to the previous programming menu.
Continue pressing
until you exit programming. The monitor will also automatically
exit programming mode after 60 seconds of inactivity.
Note:
- Upon exiting programming, the wildcard button stops blinking, indicating that the
monitor is programmed.
0 2 8
_ _ _
2222
4444
0 2 8
PROGRAMMING: ADMINISTRATOR Menu
Access the Administrator menu
When the monitor has already been programmed.
1. To access the ADMINISTRATOR menu. Press "Menu" for 3 seconds.
. The following
screen is viewed, the do not disturb option appears by default (white line under the icon),
select the tool icon via the cursors to access the Administrator menu screen. The
selected option is displayed with the white line under the icon. Press , and a screen
appears to access the administrator menu, select the option.
to access the screen
CONFIGURATION menu