Operating Instructions and Installation Instructions

Page 20
SMILE VDSSMILE VDS
SMILE VDSSMILE VDS
SMILE VDS
SMILE VDSSMILE VDS
SMILE VDSSMILE VDS
SMILE VDS
0 2 8
0 7 1
2222
4444
0 7 1
3rd. Exit Programming: When you press you exit to the previous programming menu.
Continue pressing  until you exit programming. The monitor will also automatically
exit programming mode after 60 seconds of inactivity.
a.4) Programming a call forward. Option 2: from Panel + Monitor
1. In order to select programming from the
panel, select the panel from the VDS (2)
line with the right arrow.
0 2 8
_ _ _
2222
4444
2. The selected option is displayed with the white line under the icon. Press , and a
screen appears confirming the selected option: programming from the panel and you
hear a beep on the monitor.
_ _ _
_ _ _
2222
4444
3. The monitor automatically connects to the street panel, activating the camera (this
shows a panel icon in the upper left corner of the monitor). Enter the calling code for this
monitor from the panel. Depending on the type of panel installed:
- pressing the corresponding button or
- by entering the code + bell.