Quick Start Guide

SMILE VDS
SMILE VDS
6. Exit Programming: When you press  you exit to the previous programming menu.
Continue pressing
 until you exit programming. The monitor will also automatically exit
programming mode after 60 seconds of inactivity.
Notice:
- The wildcard button will continue blinking (red) until having exited programming. Upon
exiting programming, this button stops blinking, indicating that the monitor is programmed.
- If you want to re-program the monitor the administrator code is 4444.
1. To access the USER menu. Press “Menu” for 3 seconds.
.Select Confi guration Menu:
a) ringtones, with the cursors (white line under the icon) and press .
CONFIGURATION menu
a b
c
d
PROGRAMMING: USER Menu - Ringtones
Ringtones
a) Ringtones
Within the menu, the monitor allows you to se-
lect an independent ringtone for the call from:
- a1) Main street panel
- a2) Secondary street panel.
- a3) Doorbell.
- a4) Audio Adjustments.
You can select that the ringtone rings three
times (continuous mode).
1. Select the origin of the call with the cursors
 , panel 1, panel 2 or door bell(white
line under the icon). Press , you access
the ringtone.
2. Within the ringtone (white line under the
icon), if you press  , you change and
listen to the different ringtones, (when
a ringtone sounds in demo mode, the
monitor´s screen is turned off).
1
1
1
1
1
1
a1
a2
a3
a4
2
1
1
3. If you want the ringtone to ring three times
(continuous mode), press , to select con-
tinuous mode (white line under the icon).