Quick Start Guide

SMILE VDS
SMILE VDS
contrast
brightness
colour
1
2. Select the desired option and increase or decrease the video adjustments according to
the selected option.
- : button to decrease.
+ : button to increase.
⌧: return to the previous screen and confi rm the selection.
Audio Adjustments
While the audio channel is open the input audio´s volume can be regulated via a contextual
menu on the screen. Short-press the “MENU”
button and a menu appears on the screen
to adjust the audio.
adjustments
audio
Select the audio adjustments option with the correspon-
ding capacitive button.
While in audio adjustments, use the capacitive buttons
to obtain the desired settings. You will exit the audio
adjustments option after 60 seconds.
1
Mute function: activate/deactivate the corresponding
capacitive button. This function silences the audio. When
activated, the icon will disappear from the upper right of
the screen.
1
to
decrease
audio
to
increase
audio
The monitor will not function until it has been programmed!
There are two monitor programming options:
Option 1: from Panel + Monitor
Option 2: from the Monitor. See advanced manual cod. 97711 in www.fermax.com
Notes:
- The wildcard button
blinking (red) indicates that the monitor has not been programmed.
The icons viewed on the screen (navigation
buttons:
, ,  and ), are managed
with the corresponding capacitive buttons
located on the monitor
Capacitive buttons
Navigation buttons
- Navigation and capacitive buttons
PROGRAMMING the SMILE Monitor