VIVO MONITOR sos USER’S MANUAL ENGLISH Cod.
VIVO VIVO KIT KIT Section II - User Manual Congratulations on purchasing this quality product! The VIVO Video Door Entry System is hands-free and with a 7" full colour screen that allows you to communicate with the entry panel, see the caller and open the entrance door if you wish. Thanks to its on-screen menu new features are included for configuring the monitor's parameters. We hope you enjoy its range of functions. www.fermax.com.
VIVO VIVO KIT KIT VIVO Monitor Introduction: The VIVO monitor is a monitor based on the Internet Protocol. This monitor is part of the LYNX system: data, multi-channel audio and video based on TCP / IP PoE. Communication is held via the panel based on an IP video door entry system (the LYNX module for Audio and Video). The VIVO monitor is handsfree, with duplex audio, colour video and a 7" touch screen and additional capacitive buttons for the most common functions.
VIVO VIVO KIT KIT Buttons Operating description MENU button - When the touchscreen is in standby, the screen will light up by pressing the MENU button. - When the touchscreen is lit, by pressing the MENU button you can return it to standby. - When the user is browsing in a submenu, by pressing the MENU button you can return to the homepage. SOS Panic Button. No function in the kit. Icons Description Do not disturb mode - A function to deactivate the sound of a call from the monitor.
VIVO VIVO KIT KIT 1.1 Not answering a call - Missed calls When the monitor receives a call, the video immediately appears and plays the selected ring tone on the monitor, depending on the call origin. The monitor displays the call origin (kit panel, another residence's monitor...etc). If the call is not answered in 30", the monitor returns to standby and the call is registered as a missed call.
VIVO VIVO KIT KIT By pressing the call history icon you access the Call History screen. By pressing the Missed call tab, they are displayed. If a picture has been taken during a call, an image icon is added to the element on list. When the selected element on the list includes the picture icon, the camera's button is available in the bar on the left. Besides the image icon, there are two more buttons: • Delete: Delete the selected call. • Return: Return to the start menu.
VIVO VIVO KIT KIT 1.3 Answer call - Audio settings and mute If the call is answered by pressing the icon: answer call (green telephone), the audio communication is connected and the audio controls appear: audio settings and mute. Regarding the icons that appear on the screen: - Reject call is hidden - Answer call (green telephone), changes to End conversation (red telephone).
VIVO VIVO KIT KIT 2. VIDEO SETTINGS: colour, brightness and contrast. The monitor allows you to adjust brightness, contrast and colour by pressing the Video settings icon. See page 14. 3. PICTURE CAPTURE - PICTURE VIEW The Picture capture icon (camera) can take pictures manually or automatically. 3.1 Capture the images automatically The default monitor comes with the image capture option. Only missed calls. See option 8.4 Picture settings. 3.
VIVO VIVO KIT KIT When you press the images icon you access the picture view screen that shows the most recent picture, with the description defined by the Terminal from which you made the call, date and time. By sliding your finger from left to right the most recent pictures are displayed, and if you slide it from right to left you show the older pictures (sequentially). If the image is pressed once, it is displayed in full screen.
VIVO VIVO KIT KIT RESETTING IMAGES: To delete all the images, press the delete button (trash bin) for more than 1 second. This requires confirmation. These actions are not synchronised with the monitors in the same residence. 4. OPENING THE DOOR The Door open icon (key), is used to open the door. If only one relay is defined for the panel, you open the door by pressing the key icon. If there are two relays defined on the panel, a menu appears with the two options for the user to select from.
VIVO VIVO KIT KIT 5. AUTO-START: CONNECTING OUTDOOR PANEL / IP CAMERA (if applicable) With the monitor in standby, if you press the panel icon from the monitor's start menu, the kit panel is displayed (with its default description) and if you have access to the IP cameras (if installed, ask your installer). The user can select the panel and communicate with it. At first only the video connects. If desired, the user can connect the audio as seen in point 1. RECEIVING CALLS.
VIVO VIVO KIT KIT If the user connects with an IP camera, in this case no key icon appears since there are no relays to open. Notes: - The monitor detects the camera during start-up and once an hour. The camera must be on when starting up the monitor. If the camera is started after the monitor has started, you must wait 1 hour for it to update and detect it.
VIVO VIVO KIT KIT SOS The normal mode is reset after the programmed period has expired or by pressing the do not disturb icon on the home screen. Once disabled the led will turn off. Notes: - If the do not disturb mode is enabled and the monitor is reset or turned off (without power), it is disabled. - When the do not disturb mode is enabled, the message reception sound is not deactivated. See option 8.1 Picture settings. 7.
VIVO VIVO KIT KIT - To clean just use a soft cloth without lint. Abrasive cloths, towels, paper towel and the like may cause damage to the Vivo monitor's screen. Do not put the openings in contact with liquid or humidity. Do not use aerosols, dissolvents or abrasives. Do not spray directly with cleaning sprays. 8. GENERAL SETTINGS Via this function you can access others to adjust different monitor settings. Note: Access to the General Settings menu may be restricted with a PIN.
VIVO VIVO KIT KIT Description and operations for the General Settings screen, developed for the Kit. 8.1 RING SETTINGS The ring settings allow you to select a ringtone for the panel kit along with its volume. Notice: This function has other optional features in building installations. Other settings: - Select the Continuous ring tone : • With this option selected the ringtone sounds for 30 seconds. • If this option is not selected the ringtone only sounds once.
VIVO VIVO KIT KIT 8.2 BACKGROUND SETTINGS The Background settings allow you to: - Select the background colour and brightness. - Select the touch screen's audio level. Change the click volume 8.3 LANGUAGE SETTINGS The language settings function allows you to select the desired language for the monitor. The default monitor language is English. See page 15. 8.4 PICTURE SETTINGS The picture settings function allows you to take pictures automatically in each call.
VIVO VIVO KIT KIT Warning: Check the legal requirements for data protection and privacy to take and save public images. 8.5 REGIONAL SETTINGS (Date-Time) The regional settings option also allows you to adjust/update the date and time, adapting it to the user's local date format. See page 15. 8.6 PRIVACY SETTINGS The Privacy settings allow you to protect some of the monitor's characteristics requiring privacy with a PIN.
VIVO VIVO KIT KIT User quick operating guide: 1. RECEIVING CALLS Upon receiving a call the conversation screen automatically opens. Icons displayed here: Reject call.This icon is hidden when you return the call (green telephone). Answer call (green phone hung-up). When this icon is activated it changes to the End-of-conversation icon (red telephone hung-up). From the Call History screen you can view Missed calls. The Audio settings bar and MUTE. 2. VIDEO SETTINGS: Colour, brightness and contrast. 3.
VIVO VIVO KIT KIT 5. AUTO-START: CONNECTING OUTDOOR PANEL / IP CAMERA (if applicable) This function is for connecting with the kit panel and IP cameras (if applicable). Upon the auto-start with the kit panel, only the video is connected. If desired, the user can connect the audio as seen in point 1. RECEIVING CALLS. Panel kit Unit Panel 0 IP camera 6. DO NOT DISTURB MODE: Canceling Ringtones Function for deactivating the ringtone.
VIVO VIVO KIT KIT 8.3 LANGUAGE SETTINGS The language settings function allows you to select the desired language for the monitor. The default monitor language is English. 8.4 PICTURE SETTINGS The picture settings function allows you to take pictures automatically in each call. The default parameter is programmed for the monitor to take pictures for missed calls: Only missed calls. Always Only missed calls Never 8.
VIVO VIVO KIT KIT HELP MENU "?" Wherever a question mark appears on a screen, you can press it and a help screen appears explaining the icon.
VIVO VIVO KIT KIT Page 45