Installation Instructions



Coupling Installation
for sewer, drain, waste & vent piping.
Standard Connection (In House)
Loosen the stainless steel
clamps. Do not remove
clamps from coupling.
Slide flexible coupling
over plain spigot ends of
the two pipes.
Tighten to 60 inch-lbs.
torque.
Support pipe and pressure
test for leaks before
concealing.
(Max test pressure: 4.3
PSI or 29.6 KPA.)
Standard Connection (In Ground)
Loosen the stainless steel
clamps. Do not remove
clamps from coupling.
Slide flexible coupling
over plain spigot ends of
the two pipes.
Tighten to 60 inch-lbs.
torque.