Product Overview
9/12 T4812
United States
PH: 810-503-9000
FX: 810-503-1015
Canada
PH: 519-332-6711
FX: 519-332-8610
www.fernco.com
Qwik Caps
Quick, reusable caps for pipe ends, testing & cleanouts.
• Fast, easy installation
• Permanent or temporary cap
• Underground or above-ground
• Low cost and reusable
QC TECHNICAL SPECS
Part No.
ID MIN MAX PIPE SIZE
QC-0.85 0.85 0.79 0.91 1/2" PL - 1/2" ST - 3/4" Copper - 3/4" SS
QC-1.07 1.07 1.00 1.12 3/4" PL - 3/4" ST - 1" Copper - 1" SS
QC-1.38 1.37 1.22 1.50 1" PL - 1" ST - 1 1/4" Copper - 1 1/4" SS
QC-1.68 1.68 1.37 1.87 1 1/4" PL - 1 1/4" ST - 1 1/2" Copper - 1 1/2" SS
QC-2.75 2.75 2.18 2.93 2" Duriron
QC-3.75 3.76 3.29 4.00 3" Duriron - 4" SS
QC-4.75 4.82 4.32 5.05 4" Duriron - 4" Ductile - 4" Orangeburg - 4" AC - 5" SS -
4” Corrugated
QC-7.00 6.96 6.44 7.25 5" West Coast Clay - 6" Ductile - 6" AC - 6" Orangeburg -
6” Corrugated
QC-9.00 9.01 8.59 9.34 8" Ductile - 8" Orangeburg - 8" AC - 8” Corrugated
QC-9.75 9.75 9.29 10.00 8" West Coast Clay - 8" Eastern Standard Clay
QC-10.75 10.74 10.22 11.05 10" Ductile - 10" AC - 10” Corrugated
QC-14.00 14.00 13.23 14.30 12" Concrete and Clay falling within caps dimensional
range - 14" PL
NOMINAL PIPE SIZE QWIK CAPS
QC-101 1.86 1.61 1.95 1 1/2" PL - 1 1/2" CI - 1 1/2" Copper - 1 1/2" ST
QC-102 2.34 1.94 2.48 2" PL- 2" CI - 2" Copper - 2" ST - 2" SS - 1 1/2" Duriron
QC-103 3.48 3.09 3.63 3" PL - 3" CI - 3" Copper - 3" ST
QC-104 4.47 3.96 4.60 4" PL - 4" CI - 4" Copper - 4" ST - 4” Triple Wall
QC-105 5.57 5.03 5.85 5" PL - 5" CI - 5" Copper - 5" ST - 4" Clay - 4" Concrete
QC-106 6.30 5.73 6.62 6" PL - 6" CI - 6" Copper - 6" ST - 6" SS - 5" Eastern Standard
Clay - 5" Orangeburg - 5" AC - 5" Concrete
QC-108 8.63 7.70 9.11 8" PL - 8" CI - 8" Copper - 8" ST - 8" SS - 6" West Coast Clay
QC-110 10.47 9.88 11.00 10" PL - 10" CI - 10" Copper - 10" ST - 10" SS - 8" Concrete
QC-112 12.49 11.41 13.33 12" PL - 12" CI - 12" ST - 12" Ductile - 12" AC - 10" West
Coast Clay - 10" Eastern Standard Clay - 10"Concrete
Qwik Caps oer a quick, easy way to cap pipe ends, test pipes and cleanouts. Made of
exible PVC, they are suitable for above-ground or under-ground use. To install, simply
place over open end of pipe and tighten to 60” lbs. of torque, always remember
to hand tighten when installing on corrugated pipe.
Custom sizes greater than 14” available - call for details.
NEW SIZES ADDED
TO INVENTORY