Installation Guide

www.fernox.com

3 IN 1 SOLUTION

PROTECTS

AGAINST...

ANTIFREEZE

PROTECTOR ALPHI-11

Fernox Antifreeze Protector Alphi-11 is a combined antifreeze

and inhibitor. Offering long-term protection against frost, internal

corrosion and limescale in heating and chilled water systems, the

product’s performance and environmental credentials are ﬁrst class.

Compatible with all metals and materials commonly used in heating

systems including aluminum, Antifreeze Protector Alphi-11,

is proven to work efﬁciently and has been tried and tested on

installations worldwide.

Why use Fernox Antifreeze Protector Alphi-11?

n Frost, Corrosion and Scale protection

n Protected system = reduced risk of breakdown and lower maintenance costs

n No need for a winter drain-down

n Deionized water or Soft water not required. Fernox Antifreeze Protector Alphi-11 will buffer on-site tap and well

water pH to neutral levels and will also reduce hardness levels to less than 120ppm / 7 grains.

n Compatible with all metals and materials commonly found in a heating system

n Frost protection down to -29.2°F

n Accredited with global environmental approvals: KIWA, Belgaqua, BuildCert and EST

n Environmentally friendly formulation, Nitrite, Nitrate, Phosphate and EDTA free

FROST SCALECORROSION

PAGE 1
ANTIFREEZE PROTECTOR ALPHI-11 Fernox Antifreeze Protector Alphi-11 is a combined antifreeze and inhibitor. Offering long-term protection against frost, internal corrosion and limescale in heating and chilled water systems, the product’s performance and environmental credentials are first class. Compatible with all metals and materials commonly used in heating systems including aluminum, Antifreeze Protector Alphi-11, is proven to work efficiently and has been tried and tested on installations worldwide.
PAGE 2
TECHNICAL INFORMATION Physical Properties Fernox Antifreeze Protector Alphi-11 contains monopropylene glycol. Colour Colourless Odour Mild Form Clear liquid pH (conc) 5.7 – 6.1 pH (soln 25%) 7.0 – 7.5 Application and Dosage The minimum recommended ‘in-use’ concentration of the product is 25% in order to ensure adequate corrosion protection. This concentration will protect down to -11°C/12.2°F. A concentration of 40% will protect down to -22°C/-7.6°F.
PAGE 3
PACKAGING, HANDLING AND STORAGE Fernox Antifreeze Protector Alphi-11 is supplied in 5 and 55 Gallon containers. Fernox Antifreeze Protector Alphi-11 is classified as non-hazardous and non-irritant, but as with all chemicals keep out of reach of children. Do not mix with other chemicals with the exception of Fernox products. Do not take internally. May cause an allergic reaction. Contains 1,2-benzisothiazol-3(2H)-one. In case of contact with eyes or skin, rinse immediately with plenty of water.