User Manual

PC remote control software

The PC Remote Control Software A16remote.exe lets you

control and monitor all your A16 MK-II from your PC. All you

need to do is connecting the devices to your PC via MIDI.

Alternatively, you can also use the MIDI signal embedded into

MADI. In this case you will need a MADI card supporting this

function. Please refer to the manual of the card's manufacturer

for further information.

After starting the program select the MIDI interface to which

the A16 MK-II is connected. Then press connect. All devices

connected to MIDI will now be recognised and displayed in

the list.

After selecting the desired A16 MK-II you can control it by the

program's functions.

If you are going to use the MIDI signal embedded

into MADI, transmission of the MIDI signal will be

stopped in case of a loss of the MADI signal. For that

reason the functions synchronization and sample rate

are deactivated by default. If you want to use these

functions, please select the menu item enable

extended functions.