Instruction Manual

4. Commissioning
4−54
Festo P.BE−SPC200−COM−PDP−E N en 0901c
Set START or CLK
Start timer ţ 10 s
No
Timer
expired?
Yes
No
READY = 1?
Yes
Fault quitting
Wait ţ 10 ms
Reset START or CLK
Debouncing time
Wait ţ 100 ms
A positive edge starts the fault quitting
Restore standard setting
Max. waiting time until READY signal must be present
Wait for next fault
Generate necessary signal
states
Wait ţ 10 ms
Debouncing time
The necessary signal states depend on the operating mode
used (see Fig.4/20 and Fig.4/21).
End
Fig.4/23: Carry out fault quitting