Instruction Manual

4. Commissioning
4−7
Festo P.BE−SPC200−COM−PDP−E N en 0901c
Program test in Record Select mode
In Record Select mode the window Control Signals enables
you to select an NC record number directly. This NC record
number corresponds to the actual NC record number in the
NC program.
Note that the programmed record numbers are stored begin
ning with N000 and with step size
1 when a program is loaded
with WinPISA.
Example Start NC record from line N007 of program A (? = 1−signal)
2
3
1
1
Start NC record with CLK_A−signal
2 Current NC record number (here 7)
3 Entry field for NC record number
(conclude entry with ENTER)
Fig.4/2: Selecting an NC record (example)