Owner manual

Contents and general instructions

Festo P.BE-SPC11-DNCM-EN en 0204NH

Notesontheuseofthismanual

This manual contains special information on installing and

commissioning the SPC11 in co njunction w ith drive type

DNCM-...-POT .

The SPC11 is available in different designs. In th is manual the

SPC11 with multipin connection is described as an example.

Detailed information on the different designs can be found in

the rel evant system manual for the SPC11.

General information on the method of operation, fitting, in-

stalling and commissioning pneumatic drives with the SPC11

can be found in the system manual P.BE-SPC11-SYS-... .

Manuals for the SPC11

Manual Title Contents

System manual

Soft Stop SPC11 electronics/

pneumatics

P.BE-SPC11-SYS... General instructions on installi ng

and commissioning

Drive- specific supplement for operat-

ing the SPC11 with a cert ain drive,

e.g. with the DNC-... (e.g. this manual)

P.BE-SPC11-...-... Special installation and commission-

inginstructionsaswellasparameter

settings for the appropriate drive

1) These manuals contain the permitted drive-valve combinations, drive diameters and mass loads

as well as the parameter settings valid here for the SPC11.

Please note

For installation and commissioning you will require the

system manual as well as the manual “Drive-specific

supplement” for the drive used.