Owner's manual

Contents and general safety instructions

Festo P .BE-SPC11-DGCI-EN en 1406d

Product-specific terms and abbreviations

The following product-specific abbreviations are used in this

manual:

Term/abbrevi-

ation

Meaning

0-signal Input or output supplies 0 V

1-signal Input or output supplies 24 V

Drive The term drive is used in this manual for the linear unit (DDLI, DGCI-... or

DGP(I)(L)-...), cylinder (DDPC, DNC...) or rotary drive (DSM I-...).

O Digital output

Cushioning stage The positioning behaviour is determined by the amplification and cushioning

stages. The cushioning stage serves to optimize the approach behaviour when

moving to the end positions.

I Digital input

PLC/IPC Programmable logic controller/industrial PC

System parameters Characteristic value which describes the system structure, the features and

components of the drive used.

Parameters Parameters which must be set in order that the system can be operated.

The amplification stage, the cushioning stage and the system parameter

belong here.

Teach procedure During the teach procedure the SPC11 c hec ks the set parameters, learns the

position of the mechanical fixed stops as well as various characteristic system

values and saves them in the integrated EE PROM.

Amplification stage The amplification stage influences the acceleration behaviour of the drive,

for example. The amplification stage should usually be set as spe cified in the

“Drive-Specific Supplement” manual. If the positioning behaviour is optim-

ized later, only the cushioning stage should be modified.