User Manual

4. Commissioning
4-13
Festo P.BE-SPC11-SYS-EN en 1406e
Determine value of the o-parameter
Different combinations of options are possible. You determine
the value to be set through addition of the individual decimal
values of the desired options.
Example:
Options
Bit Calculation
UseO5forReadysignal-instead of Errorsignal 0 +1
Switch off soft end position behaviour 3 +8
Use I4 for Stop signal (stop with return
travel) – instead of Move signal
6 +64
Total(valuetobeset) =73
Alternative calculation
Bit no. 6 5 4 3 2 1 0
Bit value 1 0 0 1 0 0 1
Calculation
1*2
0
+ 1*2
3
+ 1*2
6
= 73