User Manual

www.festool.co.uk

For system accessories and consumables

see from page 24

1.5° router table

for veneered surfaces

0° router table

for untreated surfaces

Flexible set-up – the motor can be ﬁtted

either horizontally or vertically on the

routing module.

The OFK 500 operates at a particularly small

distance from the cutter to the router table.

As a result, you have no routing errors, no

slipping on corners and a better ﬁnish overall.

Reduces sources of error – the contact spring

of the OFK 700 smoothes over rough edges so

errors are not transferred to the cutter and the

edge of the workpiece.

1.5° and 0° router table: The angle of 1.5° protects

the surface during routing. The 0° table (OFK 700/

MFK 700) is used for veneered or coated workpieces.

2011_GB_en_FB_Routing.indd 13 06.05.11 16:30