User Manual

s = 8
s = 12
n max 22,000
n max 22,000
8) Scope of delivery: ball bearing diameter
12.7 mm, ball bearing diameter 9.5 mm
9) Without centre point
10) For drilling series of holes
11) Used with the VS 600 jointing system dowel unit
13) Scope of delivery: ball bearing set with
diameter 9.5 mm to 22 mm
Festool cutters
12) Scope of delivery: 1 ball bearing dia. 12.7 mm
with rebate depth 9.5 mm
ØD NL GL R Fα Order No.
16.7 9 49 2 – 491009
8)
18.7 10 50 3 – 491010
8)
20.7 11 51 4 – 491011
8)
22.7 12 52 5 – 491012
8)
25.5 13.5 54 6.35 – 491013
8)
28.7 15 55 8 – 491014
8)
31.7 16.5 56 9.5 – 491015
8)
38.1 19 59 12.7 – 491016
8)
42.7 22 62 15 – 491017
8)
43 22 72 15 – 491106
63 32 82 25 – 491107
ØD NL GL R Fα Order No.
15 – 54.5 – – 491070
18 – 54.5 – – 491071
20 – 54.5 – – 491072
22 – 54.5 – – 493263
25 – 54.5 – – 491073
26 – 54.5 – – 491074
30 – 54.5 – – 491075
34 – 54.5 – – 491076
35 – 54.5 – – 491077
ØD NL GL R Fα Order No.
42 14 54 6 – 491131
ØD NL GL R Fα Order No.
31.7 12.7 54 – – 491022
12)
ØD NL GL R Fα Order No.
38 12 53.7 – – 491085
13)
ØD NL GL R
1
R
2
Order No.
31.7 13 53 4 4 491029
38.1 19 59 6.35 6.35 491030
ØD NL GL R Fα Order No.
64 26 76 16 – 492710
ØD NL GL R
1
R
2
Order No.
32 41 107 20.5 16 492711
ØD NL GL R Fα Order No.
5 30 53.5 – – 491064
10)
ØD NL GL R Fα Order No.
3 16 55 – – 491065
9) 10)
5 30 53.5 – – 491066
10) 11)
6 30 53.5 – – 491067
10) 11)
8 30 53.5 – – 491068
10) 11)
10 30 53.5 – – 491069
10) 11)
ØD NL GL R
1
R
2
Order No.
36.7 21 61 6 6 491031
Table edge cutter
with ball bearing s = 8
Hinge location cutter
s = 8
Through-hole drill
s = 8
Table edge cutter
with ball bearing s = 12
Roman ogee cutter
with ball bearing s = 8
Table edge cutter
s = 12
Classical ogee cutter
with ball bearing s = 8
Dowel drill
s = 8
Rebating cutter
with ball bearing guide
Ø 12,7 mm
s = 8
Reversible blade rebating
cutter set with ball bearing s = 8
Roundover cutter
with 2 ball bearings s = 8/s = 12
20
2011_GB_en_FB_Routing.indd 20 06.05.11 16:30