User Manual

www.festool.co.uk
Total length (mm)
Working length (mm)
Cutter diameter (mm)
Shank diameter (mm)
Chamfering angle (°)
Radius (mm)
Marking for minimum clamping length
n max. = Maximum routing speed
Packaging unit
Tungsten carbide
High performance, high speed steel
ØD NL B R Fα Order No.
27 – – 2 – 490092
27 – – 3 – 490093
27 – – 4 – 490094
27 – – 5 – 490095
27 – – 6 – 490096
ØD NL GL R Fα Order No.
19 12 43 – – 491670
ØD NL GL R Fα Order No.
24 12 46 – 22° 491671
26 12 47 – 45° 491672
ØD NL GL R Fα Order No.
19 16 46 – – 491666
ØD NL GL R Fα Order No.
24 14 44 – 22° 491667
24 12 42 – 30° 491668
24 10 40 – 45° 491669
ØD NL GL R Fα Order No.
18 9 39 2 – 491675
20 10 40 3 – 491676
ØD NL GL R Fα Order No.
20 9 49 2 – 491673
22 10 50 3 – 491674
ØD NL B R Fα Order No.
27 – – – 45° 490090
27 – – – 30° 490091
27 – – – 60° 491533
ØD NL B R Fα Order No.
22 8 – – – 490565
ØD NL GL R Fα Order No.
24 11 54 – 0°/45° 491026
ØD NL B R Fα Order No.
22 8 – – – 490085
Chamfer/flush trim cutter
with ball bearing s = 8
Flush trim cutter
without ball bearing
not shown
Flush trim
cutters s = 8
OFK 700/MFK 700
s = 8
OFK 700/MFK 700
s = 8
OFK 700/MFK 700
Roundover cutter
without ball bearing OFK 500
Chamfer cutter
without ball bearing OFK 500
Chamfer cutter
with ball bearing OFK 500
Chamfer cutter
s = 8
OFK 700/MFK 700
Roundover
cutter s = 8
OFK 700/MFK 700
Roundover/flush
trim cutter with
ball bearing
s = 8
OFK 700/MFK 700
Reversible blade-
flush trim cutter
not shown
Reversible blade-
chamfer cutter
not shown
23
2011_GB_en_FB_Routing.indd 23 09.05.11 15:45