User Manual

www.festool.co.uk
Accessories Scope of delivery Order No.
1 Clamping collet SZ-D 6/OF 1000 with union nut,
for router shank, dia. 6 mm
488760
Clamping collet SZ-D 6.35/OF 1000 with union nut,
for router shank, dia. 6.35 mm (1/4”)
488761
Clamping collet SZ-D 8/OF 1000 with union nut,
for router shank, dia. 8 mm
488755
Locking nut UEM/OF 900/KF For clamping collets 483424
2 Centring mandrel ZD-OF/D 6 35+8 for all Festool routers,
for shank support dia. 6.35 mm and 8 mm for centring the
copying rings
492187
3 Copying rings
KR-D 10,8/OF 900 D 10.8 mm, d 7.8 mm 486029
KR-D 13,8/OF 900 D 13.8 mm, d 10.8 mm 484176
KR-D17/OF 900 D 17 mm, d 14 mm 486030
KR-D 24/OF 900 D 24 mm, d 21 mm 486031
KR-D 27/OF 900 D 27 mm, d 24 mm 486032
KR-D 30/OF 900 D 30 mm, d 27 mm 486033
KR-D 40/OF 900 D 40 mm, d 37 mm 486034
4 Side stop SA-OF 1000 489427
5 Fine adjuster for side stop FE-OF 1000/KF For fast and
dimensionally accurate adjustment on the side stop,
can be retrofitted
483358
6 Chipguard SF-OF 486242
7 Edging plate UP-OF Angle arm (No. 8) and edging plate
are required for flush trimming of protruding solid wood
edge veneers
486058
8 Angle arm WA-OF needed in connection with copier scanning
set KT-OF (No. 9) for copying workpieces
486052
9 Copier scanning set KT-OF Copier scanning set KT-OF and
angle arm WA-OF (No. 8) are required to copy workpieces
486534
10 Fine adjuster for guide stop FE-FS/OF 1000 488754
11 Guide stop FS-OF 1000 for use with the FS guide system,
fitted with support
488752
12 Hard fibre base runner TP-OF With centre hole diameter 15 mm 489229
13 Base runner with chip deflector LAS-OF 1010 for lateral dust
extraction when handling edges, base runner on one side with
support widener, aperture max. 48 mm
493139
14 Table widener TV-OF 1000 For enlarging the support surface
when edge trimming
488756
15 Chip deflector KSF-OF 1010 for lateral dust extraction when
processing edges, aperture max. 37 mm
493180
16 Dust extraction hood AH-OF 1000 for jointing system VS 500/
VS 600 and for edge routing
484453
17 Guide rail with row of holes
FS 1400/2-LR32 Length: 1,400 mm 496939
FS 2424/2-LR32 Length: 2,424 mm 491622
18 Stopper LA-LR 32 FS for hole distance 9.5, 16, 32 mm,
for connecting 2 perforated rails, package contents: 2 piece(s)
496938
19 Hole set LR32 Guide plate, centring mandrel,
2 longitudinal stops, 2 side stops
583290
20 Hole drilling set LR32-SYS Guide plate, centring mandrel,
operating tool, HW hinge location cutter dia. 35 mm, HW dowel
drill dia. 5 mm (V-shaped tip), HW dowel drill dia. 5 mm (with
centre point and pre-cutting blade), 2 side stops with adjustable
stop, 2 clamps FSZ 120, 2 longitudinal stops, in SYSTAINER
SYS 1 T-LOC
584100
21 Side stop SA-LR32 With stop flag, for parallel alignment
of guide rails
485758
22 Adjustable stop AR-LR32 For side stop 485759
23 Guide plate FP-LR32 Centring mandrel 494340
Accessories Scope of delivery Order No.
24 Jointing system VS 600
Basic unit VS 600 GE for professional timber joints in hard
and softwoods
488876
25 Routing templates and cutters for partially covered dovetail joints
Dovetail joint template VS 600 SZ 14 Dovetail size 14 mm,
copying ring diameter 17 mm (for OF 1010) Workpiece
thickness 14-20 mm
488877
Dovetail cutter HS shank 8 mm HS S8 D14,3/13,5/15°,
for partially covered dovetail joints SZ 14, D 14.3 mm,
NL 13.5 mm, GL 46 mm, alpha 15 °
490991
Dovetail cutter HW shank 8 mm HW S8 D14,3/13,5/15°,
for partially covered dovetail joints SZ 14, D 14.3 mm,
NL 13.5 mm, GL 46 mm, alpha 15 °
490992
Dovetail joint template VS 600 SZ 20 Dovetail size 20 mm,
copying ring diameter 24 mm (for OF 1010) Workpiece
thickness 21-28 mm
488878
Dovetail cutter HS shank 8 mm HS S8 D20/17/15°, for partially
covered dovetail joints SZ 20, D 20 mm, NL 17 mm, GL 49 mm,
alpha 15 °
490995
Dovetail cutter HW shank 8 mm HW S8 D20/17/15°, for partially
covered dovetail joints SZ 20, D 20 mm, NL 17 mm, GL 49 mm,
alpha 15 °
490996
26
Routing templates and cutters for open dovetail joints
Template-kit VS 600 SZO 14 Dovetail size 14 mm, copying ring
diameter 8.5 mm (for OF 1010), copying ring diameter 17 mm
(for OF 1010), Workpiece thickness 10-14 mm
491152
Dovetail cutter HW shank 8 mm HW S8 D14,3/16/10°,
for open dovetail joints SZO 14, D 14.3 mm, NL 16 mm,
GL 50 mm, alpha 10 °
491164
Spiral groove cutter HW shank 8 mm HW Spi S8 D6/16, for box
joint FZ 6 and open dovetail joint SZO 14, with extra precision
across the diameter D 6 mm, NL 16 mm, GL 50 mm
490978
Template-kit VS 600 SZO 20 Dovetail size 20 mm, copying ring
diameter 13.8 mm (for OF 1010), copying ring diameter 24 mm
(for OF 1010), Workpiece thickness 14-25 mm
491153
Dovetail cutter HW shank 8 mm HW S8 D20/26/10°,
for open dovetail joints SZO 20, D 20 mm, NL 26 mm,
GL 58 mm, alpha 10 °
491165
Spiral groove cutter HW shank 8 mm HW Spi S8 D10/30,
for box joint FZ 10 and open dovetail joint SZO 20, with extra
precision across the diameter D 10 mm, NL 30 mm, GL 60 mm
490980
29
2011_GB_en_FB_Routing.indd 29 06.05.11 16:30