User Manual
Routing and accessories
Scope of delivery and order numbers.
Accessories Scope of delivery Order No.
36 Worktop template APS 900 for corner joints and panel
connections of up to 900 mm in depth, for cutter diameter
14 mm and copying ring 30 mm, corner joint template,
profile MFS-VP 1000, 3 bolts, operating tool
492727
37 Reversible blade groove cutter HW shank 12 mm
HW S12 D14/45 WM, D 14 mm, NL 45 mm, GL 92 mm
491110
38 Edge trimming cutter HW shank 12 mm, HW S12 D 14/50,
D 14 mm, NL 50 mm, GL 100 mm
491089
39 Dust extraction hood AH-SA-OF 2000 Extraction hood for
side stop
489565
40 Chip catcher KSF-OF 2200 for lateral extraction when
processing edges, max. cutter diameter 80 mm
494670
41 Copying rings
KR-D 17,0/OF 2200 D 17 mm, d 15 mm 494622
KR-D 24,0/OF 2200 D 24 mm, d 22 mm 494623
KR-D 27,0/OF 2200 D 27 mm, d 24 mm 494624
KR-D 30,0/OF 2200 D 30 mm, d 27 mm 494625
KR-D 40,0/OF 2200 D 40 mm, d 37 mm 494626
42 Copying ring KR-D 30,0/21,5/OF 2200 D 30 mm, d 27 mm,
L 21 mm, extra long safety copying ring, required for use
of reversible blade groove cutter (No. 43)
497453
43 Reversible blade groove cutter See also page 17 ff. Cutters Extra long
reversible blade cutters for routing door hinges in block hinges and door
frames. Extra long safety copying ring (no. 42) an essential requirement
for using reversible blade cutters
HW S12 D16/50 WP HW Shank 12 mm, S12 D16/50WP, D16 mm,
NL 50/60 mm, GL 110 mm
497454
HW KN D20/50 WP/K HW with conical direct mounting,
KN D20/50 WP/K, D 20 mm, NL 50/60 mm, GL 110 mm
497455
HW KN D24/50 WP/K HW with conical direct mounting,
KN D24/50 WP/K, D 24 mm, NL 50/80 mm, GL 127 mm
497456
Accessories Scope of delivery Order No.
27 Routing templates and cutters for box joints
Slot joint template VS 600 FZ 6 Dovetail size 6 mm,
copying ring diameter 8.5 mm (for OF 1010) Workpiece
thickness 6-10 mm
488879
Spiral groove cutter HW shank 8 mm HW Spi S8 D6/16,
for box joint FZ 6 and open dovetail joint SZO 14, with extra
precision across the diameter D 6 mm, NL 16 mm, GL 50 mm
490978
Spiral groove cutter HS shank 8 mm HS Spi S8 D6/16,
for box joint FZ 6 and open dovetail joint SZO 14, with extra
precision across the diameter D 6 mm, NL 16 mm, GL 50 mm
490944
Slot joint template VS 600 FZ 10 Dovetail size 10 mm,
copying ring diameter 13.8 mm (for OF 1010), Workpiece
thickness 10–20 mm
488880
Spiral groove cutter HW shank 8 mm HW Spi S8 D10/30,
for box joint FZ 10 and open dovetail joint SZO 20 with extra
precision across the diameter D 10 mm, NL 30 mm, GL 60 mm
490980
Spiral groove cutter HS shank 8 mm HS Spi S8 D10/30,
for box joint FZ 10 and open dovetail joint SZO 20 with extra
precision across the diameter D 10 mm, NL 30 mm, GL 60 mm
490946
28 Dowelling joints
Jointing system dowel joint unit VS 600 DS 32 Dowelling joint
with 32 mm template, copying ring diameter 13.8 mm
(for OF 1010)
488881
Dowel drill HW, 8 mm shank with centre point
D 5 mm, NL 30 mm, GL 53.5 mm 491066
D 6 mm, NL 30 mm, GL 53.5 mm 491067
D 8 mm, NL 30 mm, GL 53.5 mm 491068
D 10 mm, NL 30 mm, GL 53.5 mm 491069
29 Copying rings
KR-D 17,0/OF 1400 D 17 mm, d 14 mm 493315
KR-D 24,0/OF 1400 D 24 mm, d 21 mm 492183
KR-D 27,0/OF 1400 D 27 mm, d 24 mm 492184
KR-D 30,0/OF 1400 D 30 mm, d 27 mm 492185
KR-D 40,0/OF 1400 D 40 mm, d 37 mm 492186
KR-D 8,5/OF 1400 D 8.5 mm, d 6.5 mm 492179
KR-D 13,8/OF 1400 D 13.8 mm, d 10.8 mm 492180
KR-D 17,0/OF 1400 D 17 mm, d 14 mm 492181
KR-D 24,0/OF 1400 D 24 mm, d 21 mm 492182
30 Base runner LA-OF 1400 Hard fibre base runner with 20 mm
bore, reduces the opening of the router in relation to the cutter
diameter, max. cutter diameter 37 mm
492574
31 Base runner with chip deflector LAS-OF 1400 for lateral dust
extraction when handling edges, base runner on one side with
support widener, aperture max. 63 mm
493233
32 Dust extraction hood AH-OF 1400 for lateral dust extraction 492585
33 Chip deflector KSF-OF 1400 for lateral extraction when
trimming edges
492732
34 Guide stop FS-OF 1400 With fine adjustment and support
for router
492601
35 Clamping collets
SZ-D 6,0/OF 1400/2200 for router shank, dia. 6 mm 494459
SZ-D 8,0/OF 1400/2200 for router shank, dia. 8 mm 494460
SZ-D 10,0/OF 1400/2200 for router shank, dia. 10 mm 494461
SZ-D 12,0/OF 1400/2200 for router shank, dia. 12 mm 494462
SZ-D 6,35/OF 1400/2200 for router shank, dia. 6.35 mm 494463
SZ-D 9,53/OF 1400/2200 for router shank, dia. 9.53 mm 494464
SZ-D 12,7/OF 1400/2200 for router shank, dia. 12.7 mm 494465
30
2011_GB_en_FB_Routing.indd 30 06.05.11 16:30
–