User Manual

www.festool.co.uk
Accessories Scope of delivery Order No.
44 Base runner LA-OF 2200 D36 CT for copying rings < 30 mm,
with openings for optimum dust extraction
494675
45 Base runner LA-OF 2200 D36 reduces the opening of the
router in relation to the cutter diameter
494677
46 AFB-OF 2200 support Support widener for safe guidance
of the router at workpiece edges
494682
47 Guide stop FS-OF 2200 with fine adjustment and support plate
for router, without rods ST-OF 2200/2
494681
48 Rod ST-OF 2200/2 Guide rods for side stop and guide
rail adapter
495247
49 Accessories Systainer ZS-OF 2200 M Guide rail adapter set,
side stop with fine adjustment and extraction hood,
guide rods, copying ring dia. 17 mm, copying ring dia. 24 mm,
copying ring dia. 27 mm, copying ring dia. 40 mm, base runner
D36 , base runner for Copying rings, support widener,
in SYSTAINER SYS 3 T-LOC
497655
50 Side stop SA-OF 2200 with fine adjustment and extraction
hood, without rods ST-OF 2200/2 (No. 48)
494680
51 Trammel unit SZ-OF 1000 For cutting curves, circles and
ornamentation on surfaces and edges, circle dia. 153-760 mm
483922
52 Routing template MFS 400 for rectangular (300 x 100 mm)
or curved (diameter 600 mm) routing tasks, 2 angle stops,
tilt protection, circle routing insert, operating tool
492610
Routing template MFS 700 for rectangular (600 x 300 mm)
or curved (diameter 1,200 mm) routing tasks, 2 angle stops,
tilt protection, circle routing insert, operating tool
492611
53 Extension profile for extending MFS 400, MFS 700
MFS-VP 200 with scale, 2x profile 200 mm,
longitudinal connector
492722
MFS-VP 400 with scale, 2x profile 400 mm,
longitudinal connector
492723
MFS-VP 700 with scale, 2x profile 700 mm,
longitudinal connector
492724
MFS-VP 1000 with scale, 2x profile 1,000 mm,
longitudinal connector
492725
MFS-VP 2000 without scale, 2x profile 2,000 mm,
longitudinal connector
492726
54 Router carriage MFS-FS for MFS 400, MFS 700, for large-
surface routing, travel range 600 mm, copying ring diameter
30 mm
495648
55 Routing aid OF-FH 2200 Movable legs allow the router to be
guided safely along narrow edges.
495246
56 Guide rails
FS 800/2 Length: 800 mm 491499
FS 1080/2 Length: 1,080 mm 491504
FS 1400/2 Length: 1,400 mm 491498
FS 1900/2 Length: 1,900 mm 491503
FS 2400/2 Length: 2,400 mm 491502
FS 2700/2 Length 2,700 mm 491937
FS 3000/2 Length: 3,000 mm 491501
FS 5000/2 Length: 5,000 mm 491500
57 Connector FSV connects two guide rails for longer workpieces,
pack of 1
482107
58 Cutters See page 17 ff.
Accessories Scope of delivery Order No.
59 Basic unit CMS-GE GB 110 V/240 V Foldaway legs,
safety main switch, cord holder/push stick holder,
cable and plug for the CMS module
60 Module mounting CMS-OF Module mounting, mounting
brackets, router stop, press-down fixture, guard, max. cutter
diameter 60 mm, dimensions 578 x 320 mm, weight 10.1 kg,
in carton
570251
62 Sliding table ST 492100
63 Basic unit CMS-GE 488451
64 Adjustable stop WA-AR 491712
65 Bench extension 492092
66 Table widener VB-CMS 493822
67 Longitudinal stop LA 492095
68 Support AF 492242
69 Extension table VB-CMS/CS 50 495531
70 Roller stand RB 488711
71 Extractor set CS 70 AB 488292
72 CMS and BASIS module tower, MT 1600 451975
73 Routing guard BF-OF-CMS for CMS-OF 1010, for CMS-OF1400/
OF 2000/OF 2200, protective and extraction hood, Connection
Ø d/e 27/36 mm
494643
74 Reversible blade WP 30 x 12 x 1.5 for rebating head,
package contents: 2 piece (s)
489286
75 Rebating head FK D 50 x 30 for use with cutter spindles,
diameter 50 mm
489284
76 Cutter spindle ASL20/OF1400-OF2200 for CMS-OF 1400/
OF 2000/OF 2200, for using the rebating head
Basis FK D 50x30 with Basis 6 A and CMS-OF
490131
Cutter spindle ASL20/OF1010 for use of rebating head
Basis FK D 50x30 with Basis 5 A and CMS-OF 1010
489285
77 Router table 0° 0° router table for routing at any angle 491427
78 Router table FT-MFK 700 1.5° Set 1.5° router table,
tarnishing pad, extraction hood
495165
79 Clamping collet SZ-D 6/OF 1000 with union nut,
for router shank, dia. 6 mm
488760
Clamping collet SZ-D 6.35/OF 1000 with union nut,
for router shank, dia. 6.35 mm (1/4”)
488761
Clamping collet, SZ-D 8/OF 1000 with union nut,
for router shank, dia. 8 mm
488755
Locking nut UEM/OF 900/KF For clamping collets 483424
80 Side stop SA-MFK 700 with fine adjustment,
extraction hood, with 2 guide rods
495182
81 Cutters See page 17 ff.
561231/561261
31
2011_GB_en_FB_Routing.indd 31 06.05.11 16:30