User Manual

Custom-ﬁt routing of cutouts – just adjust the

MFS to the correct measurements, secure with

clips and you are all set to carry out precise,

and reproducible tasks.

The perfect partner for all Festool routers. These

templates replace individual templates which are

time-consuming to produce. They also work much

faster, easier and more precisely.

The MFS multi-routing template is ideally suited to

ﬂexible curves, round and angled cutouts or routing

of stair strings:

X Absolutely precise cutouts and curves thanks

to the millimetre-precise scale on the proﬁles

X Accurate alignment with the workpiece by means

of angle stops

X Quick to secure – Tool is fastened

in place with a prefabricated groove for fastening

and lever clamps

X Expandable system – with guide extensions

of 200 mm to 2,000 mm

The AFS worktop template joins rounded and

proﬁled wooden boards at a precise 90° angle:

X For corner and panel connections up to 900 mm.

X For routing normal connector ﬁttings on the

undersides of panels.

X Panel widths of over 900 mm can also be cut

using the extension proﬁle

Multi-routing template MFS | Worktop template APS900

Precision as standard.

Multi-routing template for perfect arcs – both

inside and outside radiuses. The arc is complete

in a matter of minutes.

Tilt protection for large cutouts – either on

straight surfaces or around corners. The tilt

protection moves along the MFS, with the

copying ring inserted to the side.

2011_GB_en_FB_Routing.indd 8 06.05.11 16:30