Operation Manual

C A R V E X
19
GB
X Cut in an anticlockwise direction.
X Work at a slow rate of advance.
X Set the pendulum stroke [1-12] to 0 - 1.
X Set the stroke rate [1-5] to 1 - 5.
L Store the centring mandrel in the depot
[10-3] .
Semi-stationary sawing with the Festool
CMS system
When combined with the Festool CMS system,
the jigsaw becomes a semi-stationary bench
saw for profiled cuts. See the CMS brochure
for more information.
X Install your jigsaw with adaptation table in
the CMS as described in the operating man-
ual for the CMS-PS.
11 Environment
Do not dispose of the device in
household waste!
Recycle devic-
es, accessories and packaging. Ob-
serve applicable country-specific
regulations.
EU only: European Directive 2002/96/EC stip-
ulates that used electric power tools must be
collected separately and disposed of at an en-
vironmentally responsible recycling centre.
Information on REACh: www.festool.com/
reach
12 EU Declaration of Conformity
We declare under sole responsibility that this
product complies with the following directives
and standards:
2006/42/EG, 2004/108/EG, 2011/65/EU
(from 01.01.2013), EN 60745-1, EN 60745-2-
11 , EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
15.05.2012
Jigsaw Serial no.
PSB 420 EBQ 10003822, 10004924,
10003822
PS 420 EBQ 10003702, 10004876,
10003702
Year of CE mark: 2012