Coffeemaker User Manual

2
Contact Information
FETCO
®
Food Equipment Technologies Company
600 Rose Road
Lake Zurich • IL • 60047-0429 • USA
Internet: www.fetco.com
Phone: [phone] (US & Canada)
[phone]
Fax: [phone]
Email: [e-mail]
[e-mail]
Description & Features
The CBS-2050e Series coffee brewers feature our patented intermittent spray over technology, which works like
this:
The following variables are programmed for each batch size:
 Brew volume  Prewet percent (Percentage of the brew volume)
 Brew time  Prewet delay (The time between prewetting and the brew cycle.)
 Bypass percent
(Percentage of the brew volume)
 Drip delay (The time between the end of the brew cycle
and the unlocking of the brew basket.)
Using these variables, the software calculates how much water to use for prewetting, bypass, and brewing. The
total brew time is divided into several 30 second cycles. Within these cycles, the software calculates how long to
spray water over the coffee grounds, and how long to pause before the next cycle begins. The bypass valve opens
at the beginning of the brew cycle and dispenses the correct amount of water all at once.
Features
 Three fully programmable batch sizes per side  Brew basket safety locks
 Adjustable prewetting cycle  Brew temperature protection
 Adjustable bypass  Universal wiring – single or three phase
 Electronically controlled hot water service
Specifications
Requirements
 Water Requirements:  Electrical: See electrical configuration chart.
CBS-2051e: 20-75 psig, 1 gpm
CBS-2052e: 20-75 psig, 1 ½ gpm
 Coffee Filters: 15” X 5 ½ ” FETCO Product # F001
CBS-2052e20: 20-75 psig, 1 ½ gpm
Weights and Capacities
Brewer Model Weight
(empty)
Water tank
Capacity & Weight.
Weight
(filled)
*Dispenser
Weight, ea.
*Dispenser
Filled, ea..
*Total Weight Brewer &
Dispensers, Filled
CBS-2051e 55 lbs. 5.5 gal. 46 lbs. 81 lbs. 10.5 lbs. 23 lbs. 104 lbs.
CBS-2052e 92 lbs. 10.3 gal. 86 lbs. 178 lbs. 10.5 lbs. 23 lbs. 224 lbs.
CBS-2052e20 95 lbs. 10.3 gal. 86 lbs. 181 lbs. 11.5 lbs. 28 lbs. 237 lbs.
* Based on L3D Series Dispensers