Installation Guide

15
www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222) www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
3.4 Levelling
Adjust the appliance level by means of the front
levelling feet and the rear adjustable wheels.
Operate as follows:
> If necessary, remove the bottom plinth or grille
(it is kept in position by magnets), adjust the
height of the levelling feet [ 1 ] by means of a 17
mm (11/16”) wrench.
> Then adjust the height of the rear wheels by
turning the front adjusting bolts [ 2 ] clockwise
(raise) or counter-clockwise as it may be re-
quired.
Take care if using a power driver for this and
lower the clutch to prevent damaging the leveling
mechanism.
> Remount the bottom plinth or grille.
4.1 Niche Dimensions and Installation
Styles: Integrated Series
A - KCLITU: Lateral connection Kit (included)
B - KCCITU: Central connection Kit for joining two
bottom-compressor models (not included - must
be ordered as a separate accessory)
FI36
FI30
FI24
FI18
897 (35 1/4”)902 (35 1/2”)
752 (29 5/8”)
602 (23 3/4”)
452 (17 3/4”)
747 (29 3/8”)
447 (17 1/2”)
597 (23 1/2”)
Panels WidthNiche
Series
> Firmly tighten with fingers - a tool / wrench should
not be needed to make a proper seal. Turn on the wa-
ter and ensure all connections are not leaking prior
to pushing the unit into the niche.
4. NICHE DIMENSIONS
EN
1
2
1
2
FI24: 602 (23 ¾”)
FI30: 752 (29 ⅝”)
FI36: 902 (35 ½”)
FI18: 452 (17 ¾”)
CC
B