Installation Guide

ManualsBrandsFhiaba ManualsAppliancesBrilliance Series 30 Inch Counter Depth Bottom Freezer Refrigerator

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

5.11 Mounting the handles

Handles will have to be mounted on the

panels before they are applied to the

fridge.

Operate as follows:

> Drill two holes on the back of the panels accor-

ding to the table below [ 1 ].

> Depending on the style of panel, it may be ne-

cessary to create tapered countersinks for the

screw heads

> Place the handle on top of the holes and insert

the screws through the washer, the panel, the

standoff and into the threaded receivers in the

handle [ 2 ].

> Snug firmly but do not over tighten as damage

may occur to the handle or the panel

HANDLE PRODUCT CODE

HV HO8 H07 H05

Length

1104 mm

(43 1/2”)

794 mm

(31 1/4”)

644 mm

(25 3/8”)

494 mm

(19 5/8”)

Distance

between

ﬁxing points X

900 mm

(35 1/2”)

480 mm

(18 7/8”)

490 mm

(19 1/4”)

340 mm

(13 3/8”)

Series

899 / 36”

749 / 30”

599 / 24"

449 / 18”

899 / 36” 749 / 30” 599 / 24”

5.12 Mounting panels to the door and

the drawer

Once all brackets and handles have been

applied to the panels, you can begin in-

stalling the bottom drawer.

Operate as follows:

> Partially tighten the screw to the receiver [ 1 ].

> Hook the bottom drawer panel starting from the

adjustment bolts on the bottom [ 2 ].