Installation Guide

9
www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222) www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
2.5 Installation niche features:
X-Pro Series
A - area to be left clear for the anti-tipping brackets
Minimum Niche Height
2134 mm (84”)
Minimum Niche Width
XS899 / FP36: 902 mm (35 1/2”)
XS749 / FP30: 752 mm (29 5/8”)
XS599 / FP24: 602 mm (23 3/4”)
Door Swing Clearance
XS899 / FP36: 1470 mm (57 7/8”)
XS749 / FP30: 1320 mm (52”)
XS599 / FP24: 1170 mm (46”)
Door Opening Angle
105°
Width
XS899 / FP36: 899 mm (35 3/8”)
XS749 / FP30: 749 mm (29 1/2”)
XS599 / FP24: 599 mm (23 5/8”)
Height
2120 mm (83 1/2”) + 25 mm (1”)
Depth with door
635 mm (25 ”)
Minimum distance from the wall (hinge side)
XS899 / FP36: 230 mm (9”)
XS749 / FP30: 195 mm (7 3/4”)
XS599 / FP24: 160 mm (6 1/4”)
Important!
If the units are to be installed inside a
niche or within an enclosed structure, it
is necessary to design a ventilation shaft
at the back of the niche to assure proper
ventilation at the back of the unit.
Cross-sectional chimney ventilation area
should equal 200cm² (31in²)
EN
A A
140 (5 ½”) 140 (5 ½”)
100 (4”) 100 (4”)
min 2134 (84”)
XS899 / FP36: 902 (35 ½”)
XS599 /FP24: 602 (23 ¾”)
XS749 / FP30: 752 (29 ⅝”)
560 (22”)
2120 (83 ½”) +25 (1”)
613 (24 ⅛”)+25 (1”)
635 (25”)
693 (27 ¼”)
516 (20 ⅜”)
1296 (50”)
195 (7 ⅝”)
8 (⅜”)
8 (⅜”)
97 (3 ⅞”)
+ 25 (1”)
1016 (40”)
XS899 / FP36: 1470 (57 ⅞”)
XS749 / FP30: 1320 (52”) XS599 / FP24: 1170 (46”)
560 (22”)
75 (3”)
XS899 / FP36: 899 (35 ⅝”)
XS749 / FP30: 749 (29 ½”)
XS599 / FP24: 599 (23 ⅝”)
10 (⅜”)
58 (2 ¼”)
105°
635 (25”)
XS899 / FP36: 230 (9”)
XS749 / FP30: 195 (7 ¾”)
XS599 / FP24: 160 (6 ¼”)
min 10 (⅜”)
min 50 (2”)