Technical Panels

FI36
FI30
FI24
627 (24 3/4”)897 (35 1/4”)
477 (18 3/4”)747 (29 3/8”)
327 (12 7/8”)597 (23 1/2”)
2121 (83 ½") + 25 (1")
min 540 (21 ¼”)
max 635 (25”)
A B
3 ( )
1390 (54 ¾”)
115 (4 ½”)
min 200 (7 )
135
(5
)
135
(5 )
1075 (42
)
Door/Drawer Width A
Series
Door Cutout Width B
Panels Dimensions Single Bottom - Drawer
Panels can have thickness ranging between 18 mm (3/4”) and 28 mm (1-1/8“).
Door panels can have a maximum weight 23 kg (51 lbs) and drawer panels may be a maximum weight of 11kg (25
lbs)
Exceeding these weights could void your warranty for any service issues which can be attributed to overweight pan-
els.
The hinging mechanism on Fhiaba appliances is considered to be `Zero-clearance`. The door and drawer widths spec-
ified below assume the minimum niche width is being used and a 3.5mm (1/8”) reveal is desired around the panels.
Adjust your panel dimensions accordingly to your own design criteri
a considering your niche width and your reveal.
Minimum reveal / gap should not be less than 1.5mm (1/16”).
Example:
84” niche height
36” niche width
4” toe kick height
1/8” gap desired all around
Door panel:
Width: 35-3/4”
Height: 54-3/4”
Drawer panel:
Width: 35-3/4”
Height: 84”-1/8”-54-3/4”-1/8”-4”=25”
If you want a 6” toe kick height then your bottom drawer
panel height would be 23”
Fhiaba srl
www.fhiaba.com