Panel Ready Installation

897 (35 1/4”)
747 (29 3/8”)
min 325 (12 ¾”)
max 415 (16
)
337 (13 ¼” 94( 5621) ¾”)
2121 (83 ½") + 25 (1")
A B
115 (4 ½”)
135
(5
)
135
(5 )
3 ( )
3 (
)
min 200 (7
)
950 (37 )
627 (24 3/4”)
477 (18 3/4”)
Panels can have thickness ranging between 18 mm (3/4”) and 28 mm (1-1/8“).
Door panels can have a maximum weight 23 kg (51 lbs) and drawer panels may be a maximum weight of 11kg (25
lbs)
Exceeding these weights could void your warranty for any service issues which can be attributed to overweight pan-
els.
The hinging mechanism on Fhiaba appliances is considered to be `Zero-clearance`. The door and drawer widths spec-
ified below assume the minimum niche width is being used and a 3.5mm (1/8”) reveal is desired around the panels.
Adjust your panel dimensions accordingly to your own design criteri
a considering your niche width and your reveal.
Minimum reveal / gap should not be less than 1.5mm (1/16”).
Example:
84” niche height
36” niche width
4” toe kick height
1/8” gap desired all around
Door panel:
Width: 35-3/4”
Height: 54-3/4”
Drawer panel:
Width: 35-3/4”
Height: 84”-1/8”-54-3/4”-1/8”-4”=25”
If you want a 6” toe kick height then your bottom drawer
panel height would be 23”
Door/Drawer Width A
Series
Door Cutout Width B
Panels Dimensions Two Bottom - Drawers
Fhiaba srl
www.fhiaba.com
FI36
FI30