Installation Guide

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222) www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
41
EN
IMPORTANT: the appliances must be level with
one another.
1 – Attach both units to each other at the front using
the 5 plastic brackets to hold the units together
using two screws per bracket from opposite sides.
2 – Align the units so that the spacing between them
is consistent. Note, in some cases, such as putting
a column beside a bottom-freezer model there will
be a slight dierence in depth (5mm (1/4”)).
3 – Once the gap is consistent on all edges, secure
the brackets. If the gap between the units is not
even, doors will not align properly.
Gap measurements vary according to the types
of units installed. Please refer to the table
below for correct gap measurements.