Installation Guide

21
897 (35 1/4”)
747 (29 3/8”)
FI36
FI30
min 325 (12 ¾”)
max 415 (16 3⁄8”)
337 (13 ¼”) 1265 (49 ¾”)
2121 (83 ½") + 25 (1")
A B
115 (4 ½”)
135
(5 3⁄8”)
135
(5 3⁄8”)
3 (1⁄8”)
3 (1⁄8”)
min 200 (7 7⁄8”)
950 (37 3⁄8”)
627 (24 3/4”)
477 (18 3/4”)
Installation Guide
www.fhiaba.com · www.thevettagroup.com
EnglishFrançais
Series: Integrated
Panels can have thickness ranging between 18 mm (3/4”) and 28 mm (1-1/8“).
Door panels can have a maximum weight 23 kg (51 lbs) and drawer panels may be a maximum weight of 11kg (25
lbs)
Exceeding these weights could void your warranty for any service issues which can be attributed to overweight
panels.
The hinging mechanism on Fhiaba appliances is considered to be `Zero-clearance`. The door and drawer widths
specified below assume the minimum niche width is being used and a 3.5mm (1/8”) reveal is desired around the panels.
Adjust your panel dimensions accordingly to your own design criteria considering your niche width and your reveal.
Minimum reveal / gap should not be less than 1.5mm (1/16”).
Example:
84” niche height
36” niche width
4” toe kick height
1/8” gap desired all around
Door panel:
Width: 35-3/4”
Height: 54-3/4”
Drawer panel:
Width: 35-3/4”
Height: 84”-1/8”-54-3/4”-1/8”-4”=25”
If you want a 6” toe kick height then your bottom drawer
panel height would be 23”
Door/Drawer Width A
Series
Door Cutout Width B
Panels Dimensions Two Bottom - Drawers