User Manual

8 Troubleshooting
8 Troubleshooting
8.1 Troubleshooting
8.1.1 Can not access the setting utilities ?
Ensure the configuration of WWW browser.
Please check if WWW browser is setup as "Do not connect via Proxy".
Ensure the connection with this device
Please check if the PC can transmit PING to the device.
Enter [Start]->[Programs
]->[Accessories]->[Command prompt], and enter "ping 192.168.1.1"
(*1)(Please enter from [Start]->[Programs ]->[MS-DOS prompt] according to the operation system.)
(*1) 192.168.1.1 is the default value of LAN IP address.
Please enter the address when changing.
If no respond, please check if LAN LED is light on and LAN cable is connected ready.
If LAN LED is off, please ensure the cable which is connecting to Ethernet is plugged into the device.
Ensure the configuration of the device and PC
If it still can't connect to the network, please ensure if the subnet of PC is the same with this device.
When the PC is setup as a DHCP client to acquire the IP automatically, please assign the fixed IP
address of the same network as this device to the PC, and confirm that the DHCP server of the
device is effective (Enable).
8.1.2 Forget Password ?
If you forget the password, please reset the configuration to the default value.
Regarding to the method of reset,
please refer to "8.1.3
How to reset default ?".
8-1