User Manual

8 Troubleshooting
8.1.3 How to reset default ?
If you press the reset button over 10 secs, the system will be reset to the default configuration.
Since RUN LED of the front panel will blink after 10 secs, please leave the reset button.
The device will restart.
Caution
Please note that all configuration of this device will be initialized by
this operation.
8.1.4 Can not connect the WirelessLAN ?
In order to establish WirelessLAN connection, please check that the configuration of WLAN device
is the same as this device.
Wireless connection mode
Please do not use this device in "11G only" mode, when there have 802.11b WLAN client.
SSID
Ensure that SSID of the wireless LAN device is the same with this device.
WLAN security configuration
Ensure that the security configuration of the WLAN device is the same with this device.
Regarding to WEP coding
Ensure if this device and the WLAN device share the same configuration of key.
Regarding to WPA-PSK
Ensure that PSK (Pre-Shared Key) configuration of WLAN device is the same with this device.
Regarding to the Authentication of 802.1x
Ensure if the WLAN device is selected from RADIUS server and both use the same algorithm.
8-2