User Manual

Chart 1 Important Safety Precautions
1.4.2 Back view
LAN-4 connector
WAN connector
WLAN Antenna
USB connector
Reset switch
LAN-1 connector
LAN-2 connector
LAN-3 connector
AC Adaptor
Figure 1.4.2 Back view
1-4
Table
1.4.2 F
Functions overview
Description
Menu
Remark
1
No.
AC adaptor
Connect to the attached AC/DC adaptor (DC+5V, 2A).
Caution
Please do not use another AC/DC adaptor.
It will cause the damage.
2
LAN-1 connector
RJ-45 connector (straight cross automatically)
LAN-4
Connect to IP fixed-line phone or VoIP gateway.
Moreover, it is used also for connecting
SS38 (Server Mode)~(AP Mode)
LAN-2 connector
RJ-45 connector (straight cross automatically)
Connect to IP fixed-line phone or VoIP gateway.
Moreover, it is used also for connecting
SS38 (Server Mode)~(AP Mode)
3
RJ-45 connector (straight cross automatically)
Connect to IP fixed-line phone or VoIP gateway.
Moreover, it is used also for connecting
SS38 (Server Mode)~(AP Mode)
4
LAN-3 connector
5
LAN-4 connector
RJ-45 connector (straight cross automatically)
LAN connector
SS38 (Server Mode)
6
AP
Connect to IP fixed-line phone or VoIP gateway.
Moreover, it is used also for connecting
SS38 (Server Mode)~(AP Mode)
7
This device doesn't support.
8
USB connector
Reset switch
Switch for initializing the device (by long pressing).
9
WLAN antenna
An antenna for wireless LAN transmission and reception.
RJ-45 connector (straight cross automatically)
Connect to the circuit from IP phone network
(A WAN connector cannot be used in
SS38 ~(AP Mode)