User Manual

3 Preparations for settings
3.3 Setup the PC
Please setup the manual PC network setting to connect the PC and this device.
Regarding to SS38 (Server Mode), please refer to 3.3.1. Regarding to SS38 (AP Mode), please refer to 3.3.2.
Please ensure that the LAN port has connected to the PC through category 5 cable in advance.
3.3.1 Setup the DHCP client
Initial setting of this device operates as a DHCP server.
In the setting of PC network (TCP/IP), please check if IP address will be configured automatically, and
setup the PC as DHCP client.
Step 1
Please open a "control panel" from the "start" button of PC, and double-click "Network and Dialup".
("Network and Internet connections
"will display on OS, please double-click "Network connections".)
S
S
t
t
e
e
p
p
2
2
Right-click on the "Local area connection" button, and select "
"Properties".
Step 3
Please choose "Internet protocol (TCP/IP)"from the pop-up window, and click the "Properies " button.
Step 4
Select "
Got an
IP address automatically "
on the right screen.
Click the "OK"button to save the
configuration.
The PC is set up as a DHCP client.
3-2