User Manual

5 Setup the device
It can't be skipped In
PPPoE Settings
If selecting the "PPPoE Settings", the screen will be displayed as above and you can select the
configurations as below.
User Account
To setup the client for connecting to PPPoE.
User Password
To setup the password for connecting to PPPoE.
Authentication Method
To setup the authentication method to connect to PPPoE.
To select from PAP, CHAP or MS-CHAP.
Auto-connect on Demand
To setup the function of Auto-Dialing on demand Enable/Disable.
If enable the function, PPPoE will be connected automatically.
Auto-Dialing After busy
To setup auto-dialing function Enable/Disable during talking.
The user can setup the re-dialing times for 1~10, and can set up a re-dialing interval in the range for
1~60 seconds.
Auto-disconnect Idle Time
To setup auto-disconnect OFF / ON when the call is disconnected.
If On, it can setup the Idle time until the call is disconnected automatically.
5-10