User Manual

5 Setup the device

5.1.4.1 WLAN Port Radio Setting

SSID

SSID (Service Set Identifier) can enter up to 32 letters.

Please setup the same SSID as the wireless device connecting to this device.

The initial value of SSID is sipair.

Modification of WIFI

Enable: enabling the WLAN access point function of Server Mode

Disable: disabling the WLAN access point function of Server Mode

When only using Server Mode of the SIP server, please setup "Disable" and suspend the WLAN

access point function.

Limitation of one AP Access

The number of concurrent accesses to the WLAN access point can be restricted.

Default = 10 will be the maximum for 11 Mbit/s communication environment. When customer's speed

can't reach 11 Mbit/s (in a blind spot and wants to use the phone in 30m radius), please restrict the

number of connection for better communication quality.

Hide Beacon SSID & Block Unspecified SSID

Setup the SSID stealth function and ANY connection refusal as Enable/Disable.

The initial value of SSID is Disable.

If it's setup as Enable, this device will stop the beacon of broadcasting assignment, and block the

wireless device without SSID to connect to this device.( ex: Block "any" connection)

5-14