User Manual

5 Setup the device
Channel
The default value is channel "1".
Caution
The range on the adjacent access point and the parameters set by the network
operator will greatly affect the talk and sta
ndby times of the phone, as well as
the range and quality of the phone call. Please set adjacent access point at least
for 5 c
hannels apart.
Burst Mode
Setup Burst Mode as Off/On.
Please specify a Setup Burst when the Setup Burst is On.
The default value of Burst Mode "On" is "3000".
RTS Threshold
Setup RTS (Request To Send parameter) as Off/On.
Please specify a parameter if the RTS is On.
The default value of "RTS parameter" is Off.
RTS Retries
Specify the frequency of RTS retries of connection.
Fragmentation Threshold
Setup Fragmentation parameter as Off/On.
Please specify a parameter if the Fragmentation parameter is On. The default value is Off.
Beacon Period
Setup the interval of the beacon signal. The default value is a 100ms.
5-15