User Manual

5 Setup the device
Authentication Key
Please enter the authenticated key shared with authenticated server.(RADIUS server ).
NAS ID
NAS ID (the Network Attached Server Identity) is used as a parameter of authentication.
Regarding to authentication configuration
MEMO
The configurations of the following four items will be effective if
"No" is chosen in Use of Local Server.
Authentication Server Address
Authentication Server Port
Authentication Key
NAS ID
Re-Auth Interval
Specify the cycle of a re-authentication.(in the range from 60 to 99999 secs.)
Encryption method
Display the encryption method used in the current security function.
WEP supports transmitting data encryption.
WEP Input Mode
Either ASCII or Hex can be chosen as a Key input mode.
Key Length
Either 64 bits or 128-bit encryption can be specified.
WEP Key Selection
Please select one from a maximum of 4 set up encryption Keys.
WEP Key
The maximum of 4 keys can be entered.
If the Key Length is 64 bits, ASCII inputs 5 letters and Hex inputs the letters of 10 digits.
If 128 bits, ASCII inputs 13 letters and Hex inputs the letters of 26 digits.
To add: Click here
Local Server Table (Before the edition)
Please refer to, edit and delete Local Server Table.
If adding entry, please click Add Entry.
5-19