User Manual

5 Setup the device
5.2.1.1 Firewall
Firewall
Setup the firewall (L2 ACL, packet filtering) as Enable / Disable. The default value is Disable.
If enabling firewall, the following items can be setup.
5.2.1.2 L2 ACL
Regarding to L2 ACL setting of SS38 (AP Mode)
MEMO
It's not in the "System Security" menu. Please setup in "System
Security Wizard" menu of the "System Tool Box"("7.1.1 Setting Wizard")
L2 ACL
Setup the policy of layer 2 access control list (L2 ACL) .
There are 2 configurations of Grant and Deny.
When setting as Grant, it permits that the device with the registered layer 2 MAC Address
connects to the network.
No devices which are not registered into other ACL can connect to the network.
If set as Deny, the device with the registered layer 2 MAC Address refuses to connect to the
network.
All the terminals that are not registered into other ACL make network connection.
No devices which are not registered into other ACL can connect to the network.
To add: Click here
ACL Table
The window which displays the current registration status will show as above if clicking
L2 ACL Table, If you want to add new entry, please click the "Add Entry" button in
the left side of the window.
5-25