User's Manual

below.

Figure 4 Encryption Tab

Encryption [WEP security]

The field allows you to select Disabling, 64-bit and 128-bit. When setting 64bit, or

128 bits, it means WEP security is used.

WEP Key

You can choose “Create Keys Manually” or “Create Keys with Pass-phrase”

method to enter encryption keys. It allows the entry of four keys for 64-bit and

128-bit key according to WEP function select. To be written to the driver and

registry, each key must consists of correct digits and letters allowed. The detailed

descriptions will be shown as below for these two kinds of methods:

Create Key Manually

For 64-bits encryption:

- Five alphanumeric characters in the range of “a-z”, “A-Z” and “0-9”. (e.g. MyKey)

- 10 digit hexadecimal values in the range of “A-F” and “0-9”. (e.g. 11AA22BB33).

For 128-bits encryption:

- 13 alphanumeric characters in the range of “a-z”, “A-Z” and “0-9”. (e.g.