User's Manual

21
Power Saving Mode
Indicate the power saving mode is being enabled or disabled. Power saving
mode can reduce the power usage by temporarily disconnecting wireless
connections when the connection is idle.
Figure Status Indication Area
There are two modes in the status indication area. One is Access Point and the
other is Peer-to-Peer. At the same time, each mode allows users to enable or
disable WEP. When encryption is enabling, wireless clients will offer the matched
WEP key for verification to connect to the access point; otherwise, the
connecting will fail. The following figures summarize the possible WEP key
verification outcomes:
Access Point / WEP enabled
The receiver is receiving
excellent
signals.
Encryption is enabled and matched.
The receiver can not receive the AP’s signal or
user authentication failed.