User's Manual

22
BSSID
The BSS ID stands for Basic Service Set Identification. During
infrastructure mode, it represents the MAC address of the access point.
Mode
The discovered device is an access point (AP) or a peer-to-peer (P2P)
device.
WEP
The discoverable device is encryption enable or disable in this column.
Signal Level
The signal measurement for each discovered device within the radio
range. A higher percentage means that this discovered device has stronger signal
strength. If the device you want to connect to has lower signal level, you can move
it closer to this device or vice versa.
Channel
This field shows the current channel used by the discovered device.
4. Statistics Tab
The Statistics tab is used to monitor TX and RX traffic of the wireless network.
It also offers the detailed information on error wireless packets that the other
wireless LAN device transmits and receives. Each time users switch to this page
will trigger the statistics to start counting from zero. Users can press “Reset” button
if they want to restart the counter again. If users want to temporarily freeze the
current showing counters, they can press “Pause” button to do that easily. The
detailed Statistics information contains some fields as below.