Manual

SHIFT LEVER OVERRIDE

If a malfunction occurs and the shift lever cannot be

moved out of the PARK position, you can use the

following procedure to temporarily move the shift lever:

1. Firmly set the parking brake.

2. Remove the shift lever override access cover located

on the right side of the shift lever housing.

3. Turn the ignition switch to the ON/RUN position

without starting the engine.

4. Press and maintain firm pressure on the brake pedal.

5. Using a small screwdriver or similar tool, push and

hold the override release lever in.

Shift Lever Override Access Cover

6. Move the shift lever into the NEUTRAL position.

7. The vehicle may then be started in NEUTRAL.

8. Reinstall the shift lever override access cover.