Manual

wording “TUNER Mute” will be shown on the display
(in radio mode) or “CD Pause” (in CD mode).
Press the button again to deactivate the MUTE
function. The volume will gradually increase until it
reaches the previously set level.
When the volume level is changed using the dedicated
controls, the Mute function is deactivated and the vol-
ume is adjusted to the new level selected.
Audio Adjustment
The functions that can be selected from the audio menu
change depending on the context: AM/FM/MEDIA/
SATELLITE.
Press the AUDIO button briefly to change the Audio
functions. After the AUDIO button is first pressed, the
display will show the bass level value for the source
activated at that time (e.g. in FM mode the display will
show the wording “FM Bass +2”).
Use the buttons
or to scroll through the Menu
functions. To change the setting of the selected function,
use the
or buttons.
The current status of the selected function appears on the
display.
The functions managed by the Audio Menu are:
• BASS (bass adjustment);
• TREBLE (treble adjustment);
• BALANCE (right/left balance adjustment);
• FADER (front/rear balance adjustment);
• LOUDNESS (LOUDNESS function activation/
deactivation);
• EQUALIZER — if equipped (activation and selection
of factory equalization adjustments);
9
• USER EQUALIZER — if equipped (customized equal-
ization adjustment).
Tone Adjustment
Proceed as follows:
• Press AUDIO Button,
• Use the button or to select “Bass” or “Treble”
in the AUDIO menu;
• press the or button or to increase/decrease
the bass or treble adjustments.
By pressing the
or buttons briefly, the levels
will change progressively. By pressing them down longer,
the levels will change quickly.
Balance Adjustment
Proceed as follows:
• Press AUDIO Button,
• Use the button or to set “Balance” in the
AUDIO menu;
• press the button to increase the sound from the
right speakers or the
button to increase the sound
from the left speakers.
By pressing the
or buttons briefly, the levels
will change progressively. By pressing them down longer,
the levels will change quickly.
Select the value “0” to set the right and left audio outputs
at the same level.
Fader Adjustment
Proceed as follows:
• Press AUDIO Button,
• Use the button or to set “Fader” in the
AUDIO menu;
10