Technical Specifications

F
F
12”
12
”
E
E
G
Terrrazzo Shower Floors
Monterey MFTC Series
(Neo-Corner)
General:
Monterey shower floors are designed for installations where tile walls
and glass enclosures are used.
Precast terrazzo one piece products are made of black and white
marble chips cast in white portland cement to produce a
compressive strength of not less than 3000 P.S.I., seven days after
casting. The terrazzo surface is ground and polished with all air holes
and/or pits grouted and the excess removed. Shower floors are
available in custom sizes.
Flange, cast integral, shall be of galvanized-bonderized steel and
shall extend not less than 1” (25) high and not less than 1¼” (32)
wide.
The drain body in shower floors are made of stainless steel cast
integrally and provide for a caulked lead connection not less than 1”
(25) deep to a 2” (51) pipe. Removable type stainless steel strainer
plate.
PLAIN CURBS
MODEL SIZE
APPROX.
SHIP WT.
E F G
32 MFTC 32 X 32 175 lbs/79 kg 32(813) 14(356)
25
3
/8(645)
34 MFTC 34 X 34 220 lbs/100 kg 34(864) 16(406)
25
3
/8(645)
36 MFTC 36 X 36 240 lbs/109 kg 36(914) 18(457)
25
3
/8(645)
40 MFTC 40 X 40 280 lbs/127 kg 40(1016) 22(559)
25
3
/8(645)
Installation:
Establish ¼” (6) clearance between shower floor and building wall. It
is required that the entire area between the shower floor and the
building floor has a ½” (13) layer of mortar in order that the shower
floor is level.
Optional stainless steel tiling flanges available.
NOTE: Drawings not to scale