Operation Manual

TURN SIGNAL/LIGHTS/HIGH BEAM LEVER

Turn Signal/Lane Change Assist

• Tap the lever up or down once and the

turn signal (right or left) will flash three

times to indicate a lane change and auto-

matically turn off.

Headlights/Parking Lights

• The ignition switch must be in the

ON/RUN position for the headlights to

operate.

• Rotate the end of the lever to the first

detent for parking lights and headlight

operation.

High Beams

• Push the lever forward to activate the high beams.

• A high beam symbol will illuminate in the cluster to indicate the high beams are on.

NOTE:

For safe driving, turn off the high beams when oncoming traffic is present to prevent

headlight glare and as a courtesy to other motorists.

Flash To Pass

• Pull the lever toward you to activate the high beams. The high beams will remain on

until the lever is released.

OPERATING YOUR VEHICLE