2014 FIAT 500 2014 OWNER’S MANUAL Chrysler Group LLC 14FF500-126-AC Third Edition Rev 1 Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS ! INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . .4 ! VEHICLE IDENTIFICATION NUMBER . . . . . . . .7 ! HOW TO USE THIS MANUAL . . . . . . . . . . . . . .5 ! VEHICLE MODIFICATIONS/ALTERATIONS . . . .8 ! WARNINGS AND CAUTIONS . . . . . . . . . . . . . .
4 INTRODUCTION The enclosed Warranty Information lists the services that Congratulations on selecting your new vehicle. Be as- FIAT Group Automobiles offers to its customers: sured that it represents precision workmanship, distinc- • The Warranty Certificate with terms and conditions for tive styling, and high quality - all essentials that are maintaining its validity traditional to our vehicles.
INTRODUCTION 5 The detailed index at the back of this Owner’s Manual Consult the Table of Contents to determine which section contains a complete listing of all subjects. contains the information you desire.
6 INTRODUCTION
INTRODUCTION 7 WARNINGS AND CAUTIONS 1 This Owners Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information. Observe all Warnings and Cautions.
8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS ! A WORD ABOUT YOUR KEYS . . . . . . . . . . . . .11 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . .11 ▫ Locking Doors With A Key. . . . . . . . . . . . . . . .13 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . .13 ! SENTRY KEY® . . . . . . . . . . . . . . . . . . . . . . . . .13 ▫ Replacement Keys . . . . . . . . . . . . . . . . . . . . .14 ▫ General Information . . . . . . . . . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Power Window Switches . . . . . . . . . . . . . . . . .23 ! LIFTGATE . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 ! OCCUPANT RESTRAINTS . . . . . . . . . . . . . . . .26 ▫ Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . .29 ▫ Lap/Shoulder Belt Untwisting Procedure . . . . .34 ▫ Seat Belts In Passenger Seating Positions . . . . . .35 ▫ Supplemental Restraint System (SRS) — Air Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 The vehicle is supplied with a code card containing key The key fob contains the Remote Keyless Entry (RKE) code numbers to order duplicate keys, and the authotransmitter with an integrated key. To use the mechanical rized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can key simply press the mechanical key release button. be used to order duplicate keys. A WORD ABOUT YOUR KEYS Ignition Key Removal 1.
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignition Switch Positions 1 — STOP (OFF/LOCK) 2 — MAR (ACC/ON/RUN) 3 — AVV (START) • Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK and remove the Key Fob from the ignition. When leaving the vehicle, always lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 WARNING! (Continued) • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended. Locking Doors With A Key You can insert the key with either side up. To lock the door, turn the key to the left.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: A key which has not been programmed is also Replacement Keys considered an invalid key, even if it is cut to fit the NOTE: Only keys that have been programmed to the ignition switch lock cylinder for that vehicle. vehicle electronics can be used to start the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 General Information REMOTE KEYLESS ENTRY (RKE) — IF EQUIPPED The Sentry Key® system complies with FCC rules part 15 This system allows you to lock or unlock the doors and and with RSS-210 of Industry Canada. Operation is liftgate from distances up to approximately 66 ft (20 m) using a hand-held Remote Keyless Entry (RKE) transmitsubject to the following conditions: ter.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The line of transmission must not be blocked Opening Power Top Remote Function with metal objects. The remote keyless power top function can only be used with the engine off. To Unlock The Doors And Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice, within five seconds, to unlock all doors and the liftgate. The turn signal lights will flash to acknowledge the unlock signal.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Opening Power Top Remote Function: 1. OPEN — Push and hold the unlock button down on the key fob for a minimum of three seconds to initiate Power Top Open.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Lock The Doors And Liftgate Press and release the LOCK button on the RKE transmitter to lock all doors and the liftgate. The turn signal lights will flash and the horn will chirp to acknowledge the signal. Programming Additional Transmitters Refer to Sentry Key® “Customer Key Programming”. If you do not have a programmed RKE transmitter, contact your authorized dealer for details.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 2 Key Fob Screw Location Battery Case Removed 3. Take out the battery case. Remove and replace the 4. Refit the battery case inside the Key Fob and turn the battery observing its polarity. screw to lock it into place.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Closeness to a radio transmitter such as a radio station tower, airport transmitter, and some mobile or CB radios. This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the DOOR LOCKS following conditions: The door locks can be manually locked or unlocked from • This device may not cause harmful interference. inside the vehicle by using the door handle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 WARNING! (Continued) Driver’s Door Lock Handle WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. (Continued) • For personal security and safety in the event of a collision, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not leave the Key Fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle. NOTE: To prevent the key from being locked in the vehicle, the doors will automatically unlock if the driver’s door handle is pushed when the key is in the ignition. CAUTION! An unlocked vehicle is an invitation to thieves.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Refer to “Electronic Vehicle Information Center (EVIC)” in “Understanding Your Instrument Panel” in your When enabled, the door locks will lock automatically owner manual on your DVD for further information. when the vehicles speed exceeds 15 mph (24 km/h). Autoclose To change the setting proceed as follows: POWER WINDOWS 1. Briefly press the MENU button to enter the MENU Power Window Switches screen.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) location accessible to children. Occupants, particularly unattended children, can become entrapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death. Power Window Switches Auto-Down The driver’s door window switch has an Auto-Down feature.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 second, release, and the window will go down automati- To open the liftgate, squeeze the liftgate release handle cally. To cancel the Auto-Down movement, operate the and pull the liftgate open with one fluid motion. switch in either the up or down direction and release the switch. Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. Do not use the recirculation mode.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 • All seat belt systems (except the driver’s) include 1. Children 12 years old and under should always ride Automatic Locking Retractors (ALRs), which lock the buckled up in a rear seat. seat belt webbing into position by extending the belt all the way out and then adjusting the belt to the WARNING! desired length to restrain a child seat or secure a large • Never place a rear facing infant seat in front of an item in a seat — if equipped air bag.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE children to slide the shoulder belt behind them or under their arm. You should read the instructions provided with your child restraint to make sure that you are using it properly. 2. All occupants should always wear their lap and shoulder belts properly. 3. The driver and front passenger seats should be moved back as far as practical to allow the Advanced Front Air Bags room to inflate. 4. Do not lean against the door or window.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 WARNING! (Continued) • Side air bags also need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat. • In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly. from the vehicle.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using a seat belt properly. • Wearing a seat belt incorrectly is dangerous.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap. 2 Inserting Latch Plate Into Buckle Pulling Out The Latch Plate 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • A belt buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly. In a sudden stop you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly. • A belt that is worn under your arm is dangerous.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 WARNING! Positioning Lap Belt • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt may not protect you properly. In a collision, it could even cut into you. Be sure the belt is straight.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. Lap/Shoulder Belt Untwisting Procedure The belt will automatically retract to its stowed posi- Use the following procedure to untwist a twisted lap/ tion. If necessary, slide the latch plate down the shoulder belt. webbing to allow the belt to retract fully. 1. Position the latch plate as close as possible to the anchor point.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 Seat Belts In Passenger Seating Positions The seat belts in the passenger seating positions are equipped with Automatic Locking Retractors (ALR) which are used to secure a child restraint system. For additional information, refer to “Installing Child Restraints Using The Vehicle Seat Belt” under the “Child Restraints” section. The chart below defines the type of feature for each seating position.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE position that has a belt with this feature. Children 12 years old and under should always be properly restrained in a vehicle with a rear seat. How To Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Seat Belt Pretensioners Enhanced Seat Belt Use Reminder System The seat belts for both front seating positions are (BeltAlert®) equipped with pretensioning devices that are designed to BeltAlert® is a feature intended to remind the driver and remove slack from the seat belt in the event of a collision. front passenger (if equipped with front passenger These devices may improve the performance of the seat BeltAlert®) to fasten their seat belts.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE unbuckled while traveling at speeds greater than 5 mph Seat Belt Extender (8 km/h), BeltAlert® will provide both audio and visual If a seat belt is too short even when fully extended and notification. when the adjustable upper shoulder belt anchorage (if The front passenger seat BeltAlert® is not active when equipped) is in its lowest position, your authorized the front passenger seat is unoccupied.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 addition, the vehicle is equipped with a Supplemental Driver Side Knee Air Bag mounted in the instrument We recommend that pregnant women use the seat belts panel below the steering column. throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe. Seat Belts And Pregnant Women Pregnant women should wear the lap part of the belt across the thighs and as snug across the hips as possible.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The Driver and Passenger Advanced Front Air and rear passengers sitting next to a window. The SABIC Bags are certified to new Federal regulations for Ad- are located between the side windows. The trim covering vanced Air Bags. the SABIC is labeled AIRBAG. The Advanced Front Air Bags are designed to allow the This vehicle is equipped with Supplemental Seatair bags to have different inflation levels based on several Mounted Side Air Bags (SAB).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 • Air Bag Warning Light • Steering Wheel and Column • Instrument Panel • Supplemental Driver Side Knee Air Bag • Knee Impact Bolsters • Driver Advanced Front Air Bag • Passenger Advanced Front Air Bag • Supplemental Seat-Mounted Side Air Bags (SAB) • Supplemental Side Air Bag Inflatable Curtains (SABIC) • Front and Side Impact Sensors • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, and Seat Track Position Sensors Advanced Front Air Bag Featur
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional. The protective covers for the air bag cushions are designed to open only when the air bags are inflating. • Do not drill, cut or tamper with the knee bolster in any way.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 Supplemental Side Air Bag Inflatable Curtain (SABIC) Supplemental Side Air Bag Inflatable Curtains (SABIC) may offer side-impact protection to front and rear seat outboard occupants in addition to that provided by the body structure. Each air bag features inflated chambers, placed adjacent to the head of each outboard occupant, that reduce the potential for side-impact head injuries. The SABIC deploy downward, covering both windows on the impact side.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The system includes side impact sensors that are calibrated to deploy the Seat-Mounted Side Air Bags (SAB) and SABIC during impacts that require air bag occupant protection. SAB and SABIC air bags are a supplement to the seat belt restraint system. Occupants, including children who are up against or very close to SAB or SABIC air bags can be seriously injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! (Continued) • Your vehicle is equipped with SABIC air bags, do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle. Do not add roof racks that require permanent attachments (bolts or screws) for installation on the vehicle roof. Do not drill into the roof of the vehicle for any reason. • Do not allow occupants to extend any part of their body outside of the window.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ORC deploys the Advanced Front Air Bags, Supplemental Driver Side Knee Air Bag, Supplemental Side Air Bag Inflatable Curtain (SABIC), Supplemental Seat-Mounted Side Air Bags (SAB), and front seat belt pretensioners, as required, depending on several factors, including the severity and type of impact.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 ON/RUN or START position. If the key is in the OFF/ noted that could affect the air bag system. The diagnosLOCK position, or not in the ignition, the air bag system tics also record the nature of the malfunction. is not on and the air bags will not inflate. The ORC contains a backup power supply system that may deploy the air bags even if the battery loses power or it becomes disconnected prior to deployment.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE quantity of non-toxic gas is generated to inflate the Advanced Front Air Bags. Different air bag inflation rates are possible, based on several factors, including the collision type and severity. The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the air bags inflate to their full size. The air bags fully inflate in about 50 to 70 milliseconds.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 between the occupant and the door. The SAB fully inflates in about 10 milliseconds. The side air bag moves at a very high speed and with such a high force that it could injure you if you are not seated properly, or if items are positioned in the area where the side air bag inflates. This especially applies to children.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System In the event of an impact causing air bag deployment, if the communication network remains intact, and the power remains intact, depending on the nature of the event, the ORC will determine whether to have the Enhanced Accident Response System perform the following functions: • Cut off fuel to the engine. • Unlock the doors automatically.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 Customer Action 1. Turn ignition OFF. (Turn Signal Switch Must be placed in Neutral State). 2. Turn ignition ON. 3. Turn Right Turn Signal Switch ON. 4. Turn Left Turn Signal Switch ON. 5. Turn Right Turn Signal Switch ON. 6. Turn Left Turn Signal Switch ON. 7. Turn Left Turn Signal Switch OFF. (Turn Signal Switch Must be placed in Neutral State). 8. Turn ignition OFF. 9. Turn Hazard Flashers OFF (Manually). Customer Will See 2 Left Turn Light is OFF.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If a reset procedure step is not completed within 45 seconds, then the turn signal lights will turn off and the reset procedure must be performed again in order to be successful. If A Deployment Occurs floor. They are not caused by contact with chemicals. They are not permanent and normally heal quickly. However, if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 WARNING! Deployed air bags and seat belt pretensioners cannot protect you in another collision. Have the air bags, seat belt pretensioners, and the front seat belt retractor assemblies replaced by an authorized dealer immediately. Also, have the Occupant Restraint Controller (ORC) system serviced as well. Maintaining Your Air Bag System WARNING! 2 • Modifications to any part of the air bag system could cause it to fail when you need it.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat, including your trim cover and cushion, needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), take the vehicle to your authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the Body Control Module (BCM) fuse block inside the vehicle for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper air bag fuses. See your authorized dealer if the fuse is good.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. Children 12 years or younger should ride properly buckled up in a rear seat, if available.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 NOTE: • For additional information, refer to www.seatcheck.org or call 1–866–SEATCHECK. Canadian residents should refer to Transport Canada’s website for additional information: • http://www.tc.gc.ca/eng/roadsafety/safedriverschildsafety-index-53.htm WARNING! In a collision, an unrestrained child can become a projectile inside the vehicle.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Summary Of Recommendations For Restraining Children In Vehicles Infants and Toddlers Small Children Larger Children Children Too Large for Child Restraints Child Size, Height, Weight Or Age Children who are two years old or younger and who have not reached the height or weight limits of their child restraint Children who are at least two years old or who have out-grown the height or weight limit of their rear-facing child restraint Children who have out-g
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 reach the highest weight or height allowed by their Safety experts recommend that children ride rearward- convertible child seat. facing in the vehicle until they are two years old or until WARNING! they reach either the height or weight limit of their rear facing child safety seat. Two types of child restraints can • Never place a rear facing infant seat in front of an be used rearward-facing: infant carriers and convertible air bag.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE have outgrown the rear-facing weight or height limit of their rear-facing convertible child seat. Children should remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. All children whose weight or height is above the forward-facing limit for the child seat should use a belt-positioning booster seat until the vehicle’s seat belts fit properly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 WARNING! (Continued) • When your child restraint is not in use, secure it in the vehicle with the seat belt or LATCH anchorages, or remove it from the vehicle. Do not leave it loose in the vehicle. In a sudden stop or accident, it could strike the occupants or seatbacks and cause serious personal injury.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the answer to any of these questions was “no,” then the child still needs to use a booster seat in this vehicle. If the child is using the lap/shoulder belt, check belt fit periodically and make sure the seat belt buckle is latched. A child’s squirming or slouching can move the belt out of position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Recommendations For Attaching Child Restraints Restraint Type Combined Weight of the Child + Child Restraint Rear-Facing Child Restraint Rear-Facing Child Restraint Forward-Facing Child Restraint Forward-Facing Child Restraint Up to 65 lbs (29.5 kg) More than 65 lbs (29.5 kg) Up to 65 lbs (29.5 kg) More than 65 lbs (29.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors And Tethers For Children (LATCH) Restraint System Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCHequipped child seats. There are two lower anchorages located at the back of the seat cushion where it meets the seatback and one top tether anchorage located behind the seating position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 LATCH Positions For Installing Child Restraints In This Vehicle • • Lower Anchorage Symbol 2 anchorages per seating position Top Tether Anchorage Symbol 2
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s weight + weight of the child restraint) for using the LATCH anchorage system to attach the child restraint? 65 lbs (29.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Can the rear-facing child restraint touch the back of the front passenger seat? Yes The child seat may touch the back of the front passenger seat if the child restraint manufacturer also allows contact. See your child restraint owner’s manual for more information. Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback, below the anchorage symbols on the seatback.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating The LATCH Anchorages There are tether strap anchorages behind each rear seating position located on the back of the seat. LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to the lower anchorage and a way to tighten the connection to the anchorage.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 2. Loosen the adjusters on the lower straps and on the 5. If the child restraint has a tether strap, connect it to the tether strap of the child seat so that you can more top tether anchorage. See the section “Installing Child easily attach the hooks or connectors to the vehicle Restraints Using the Top Tether Anchorage” for direcanchorages. tions to attach a tether anchor. 3. Place the child seat between the lower anchorages for 6.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE with it and accidentally lock the seatbelt retractor. Before installing a child restraint using the LATCH system, buckle the seat belt behind the child restraint and out of the child’s reach. If the buckled seat belt interferes with the child restraint installation, instead of buckling it behind the child restraint, route the seat belt through the child restraint belt path and then buckle it. Do not lock the seatbelt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Installing Child Restraints Using The Vehicle Seat Belt Lap/Shoulder Belt Systems for Installing Child Restraints in this Vehicle The seat belts in the passenger seating positions are equipped with a Switchable Automatic Locking Retractor (ALR) that is designed to keep the lap portion of the seat belt tight around the child restraint so that it is not necessary to use a locking clip.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s weight + weight of the child restraint) for using the Tether Anchor with the seat belt to attach a forward facing child restraint? Can the rear-facing child restraint touch the back of the front passenger seat? Weight limit of the Child Restraint Can the head restraints be removed? Can the buckle stalk be twisted to tighten the seat belt against the belt path of the child restraint? Yes No Yes Always use the tether anchor
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 5. To lock the seat belt, pull down on the shoulder part of the seat belt until you have pulled all the seat belt webbing out of the retractor. Then, allow the webbing 1. Place the child seat in the center of the seating to retract back into the retractor. As the webbing position. For some second row seats, you may need to retracts, you will hear a clicking sound.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE strap. See the section “Installing Child Restraints Using the Top Tether Anchorage” for directions to attach a tether anchor. rear-most position to make room for the child seat. You may also move the front seat forward to allow more room for the car seat. 9. Test that the child restraint is installed tightly by 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 6. Test that the child restraint is installed tightly by into the buckle again. If you still cannot make the child pulling back and forth on the child seat at the belt restraint installation tight, try a different seating position. path. It should not move more than 1 inch (25 mm) in Installing Child Restraints Using The Top Tether any direction. Anchorage Any seat belt system will loosen with time, so check the 1.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE between the two posts. If not possible, lower the head 4. Remove slack in the tether strap according to the child restraint and pass the tether strap around the outboard restraint manufacturer’s instructions. side of the head restraint. 3. Attach the tether strap hook of the child restraint to the top tether anchorage as shown in the diagram.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good break-in. Air Bags deploying in the front seat could harm your pet. Wide-open throttle acceleration in low gear can be detriAn unrestrained pet will be thrown about and possibly mental and should be avoided. injured, or could injure a passenger during panic braking or in a collision.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not interpreted as a problem. SAFETY TIPS Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! (Continued) • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 WARNING! (Continued) • Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area. • If you are required to drive with the trunk/liftgate/ rear doors open, make sure that all windows are closed and the climate control BLOWER switch is set at high speed. DO NOT use the recirculation mode.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (i.e., bent retractor, torn webbing, etc.). If there is any question regarding seat belt or retractor condition, replace the seat belt. feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 WARNING! (Continued) WARNING! (Continued) • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle. • Never put floor mats or other floor coverings on top of already installed floor mats. Additional floor mats and other coverings will reduce the size of the pedal area and interfere with the pedals.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside The Vehicle Lights Have someone observe the operation of brake lights and exterior lights while you work the controls. Check turn signal and high beam indicator lights on the instrument Examine tires for excessive tread wear and uneven wear panel. patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts Door Latches and cracks.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ! POWER CONVERTIBLE TOP — IF EQUIPPED . .86 ▫ Heated Mirrors — If Equipped . . . . . . . . . . . .93 ▫ Lowering The Power Top. . . . . . . . . . . . . . . . .86 ▫ Sun Visors . . . . . . . . . . . . . . . . . . . . . . . . . . .93 ▫ Raising The Power Top . . . . . . . . . . . . . . . . . .87 ! BLUE&ME™ HANDS-FREE COMMUNICATION — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . . .94 ▫ Power Convertible Top Relearn Procedure . . . . .
84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ EZ Entry Feature . . . . . . . . . . . . . . . . . . . . . .104 ▫ Lane Change Assist . . . . . . . . . . . . . . . . . . . .113 ▫ Memory Feature . . . . . . . . . . . . . . . . . . . . . .104 ▫ Follow Me Home/Headlight Delay . . . . . . . . .113 ▫ Heated Seats — If Equipped . . . . . . . . . . . . .105 ▫ Interior Lights . . . . . . . . . . . . . . . . . . . . . . .114 ▫ Head Restraints . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 ▫ To Vary The Speed Setting . . . . . . . . . . . . . . .122 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . .131 ▫ To Accelerate For Passing . . . . . . . . . . . . . . . .123 ▫ Emergency Operation. . . . . . . . . . . . . . . . . . .132 ! REAR PARK ASSIST — IF EQUIPPED . . . . . . . .124 ▫ Sun Shade — If Equipped . . . . . . . . . . . . . . .132 ▫ Rear Park Assist Sensors . . . . . . . . . . . . . . . .125 ! ELECTRICAL POWER OUTLETS . . . .
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER CONVERTIBLE TOP — IF EQUIPPED NOTE: On vehicles equipped with a power convertible top, the • The power top buttons will operate when the ignition power convertible top switch is located on the overhead switch is turned to the ACC/ON/RUN position. console. The switch contains two buttons. The passenger side button, is used to open the power top, and the driver • The power top can be remotely operated with the key fob.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 NOTE: Vertical movement only operates in auto open/ NOTE: Rail lubrication is recommended every 2000 cycles, or if scratching noises due to dust are present. close mode. Refer to “Fluids, Lubes, and Genuine Part” in “MaintainRaising The Power Top ing Your Vehicle” for information. Auto Close From the convertible top fully open position, push the top close button for approximately one second for the three-quarter open/spoiler position.
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) • Use care when washing the vehicle, water pressure directed at the weather strip seals may cause water to leak into the vehicle’s interior. WARNING! The convertible top does not provide the structural protection that a reinforced metal roof does and the fabric top cannot be expected to prevent the ejection of the occupants in a collision. Therefore, it is important that all occupants wear their seat belts at all times.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 7. CONTINUE to hold the CLOSED button until the top Wind Stop begins to cycle fully open, then release the CLOSED The Wind Stop installs in the backseat area of the vehicle. button. The Wind Stop will not interfere with power top operaAt the end of step 7 the top will automatically cycle to the tion. Therefore, it can remain installed when the top is up. fully open position, and then close to the 1/4 open MIRRORS position.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate. NOTE: This feature is disabled when the vehicle is moving in reverse.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 Power Mirrors The power mirror controls are located on the driver’s door trim panel. 3 Automatic Dimming Mirror CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The power mirror controls consist of a mirror select switch and a four-way mirror control switch. To adjust a mirror, press the mirror select switch to either the L (left) or R (right) to select the mirror you need to adjust. Using the mirror control switch, press on any of the four arrows for the direction that you want the mirror to move. Spotter Mirror — If Equipped Some models are equipped with a driver’s side spotter mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Folding Mirrors The exterior mirrors are hinged to allow the mirror to pivot forward or rearward to help avoid damage. The mirror has three detent positions: full forward, normal and full rearward. 3 Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature can be activated whenever you turn on the rear window defroster (if equipped).
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE you are not required to train the voice recognition system to recognize your voice. This implies that the system is nearly equally performing with different persons, i.e.: the Overview voice recognition system is of the “speaker independent” Windows Mobile™-based FIAT BLUE&ME™ is a per- type.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 your mobile phone manually and visually using the The basic characteristic of this hands-free kit is voice steering wheel controls and the instrument panel multirecognition with Bluetooth® wireless technology. With function display. this system you can make and receive calls safely and securely by using either voice commands or buttons on the steering wheel.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To get started with BLUE&ME™ hands-free kit with • To interact with BLUE&ME™ you can use either the voice recognition, you have to simply pair your buttons on the steering wheel or voice commands. Bluetooth® wireless technology enabled mobile phone With voice recognition, you can perform system funcwith the system. tions by speaking voice commands, also identified as “keywords”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 The hands-free kit enables the following operations: • • • • • Conference Call — You can call another contact while you are engaged in a phone conversation (with Contact Calling By Voice — You can call a contact in Bluetooth® phones supporting this option). your mobile phone phonebook using your voice. You can also call a contact in your phonebook by scanning • Call Waiting — While engaged in a phone conversathrough the entries on the multifunction display.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE wheel. When using the hands-free phone, the audio NOTE: Not all mobile phones support the SMS text output of a phone conversation is heard through your car message reader function or automatic phonebook transfer via Bluetooth®. For further information on the list of sound speakers. compatible mobile phones go to http:// Message Reader www.fiatusa.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 • To read the messages received and stored. Messages In this way, while you are driving you can play your favorite music collections. can be read multiple times. • To call the SMS text sender using the buttons on the • iPod® Player — See dedicated paragraph under Media Player Functions. steering wheel or voice commands.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • The media player does not support audio files compressed with other formats and DRM (Digital Rights Management) protected audio files. Non-supported audio files that may be present on the USB device will be ignored. • To use the media player, you have to simply connect (directly or by an extension lead) your USB device to the car USB port. After turning the ignition key to ON, BLUE&ME™ will start building your media library.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 WARNING! (Continued) WARNING! • Keep the Owner’s Manual in the car: when kept in the car, the Owner’s Manual will be a ready reference for you and other users unfamiliar with the system. Please make certain that before using the system for the first time, all persons have access to the Owner’s Manual and read its instructions and safety information carefully. • It is dangerous to ride in a cargo area, inside or outside of a vehicle.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE move forward and rearward on the seat to be sure that The adjusting bar is located at the front of the seats, near the seat adjusters have latched. the floor. Front Seats Forward/Rearward Adjustment WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 Seat Height Adjustment The driver’s seat height can be raised or lowered by using a lever, located on the outboard side of the seat. Pump the lever upward to raise the seat height, or pump the lever downward to lower the seat height. Recline Lever WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lift the seatback upright and push the seat rearward to The driver and front passenger seats have an EZ entry its locked position once the rear passengers are seated. feature for rear seat passengers.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 fore/aft (memory) position on the tracks. This results in the seat back memory being set only – The track will then be locked forward of its last set fore/aft memory position. To then reset the fore/aft track memory feature (to reestablish Memory Function Option 1), the seat has to be returned fully rearward to its last fore/aft memory track position as described in Memory Function Option 1.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Head Restraints Reactive Head Restraints — Front Seats Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rearimpact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear. The front driver and passenger seats are equipped with Reactive Head Restraints.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 NOTE: The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized dealership. WARNING! Do not place items over the top of the Reactive Head Restraint, such as coats, seat covers or portable DVD players. These items may interfere with the operation of the Reactive Head Restraint in the event of a collision and could result in serious injury or death.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Head Restraints To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the push button, located at the base of the head restraint, and push downward on the head restraint. Refer to “Occupant Restraints” in “Things To Know Before Starting Your Vehicle” for information on tether routing.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 TO OPEN AND CLOSE THE HOOD To open the hood, two latches must be released. 2. Rotate the safety catch under the front edge of the hood, near the center, and raise the hood. 1. Pull the bottom of the RED hood release lever, located on the left kick panel, rearward.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Lift the hood prop rod that clips to the right side (left In hot climates, the prop rod may be hot. Pick up the prop side when standing in front of the hood) of the engine rod at the foam on the end of the prop rod. compartment. Place the hood prop rod in the hole of hood hinge to secure the hood in the open position. WARNING! Be sure the hood is fully latched before driving your vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 LIGHTS Multifunction Lever The multifunction lever, located on the left side of the steering wheel, controls the operation of the headlights, headlight beam selection, passing light and turn signals. 3 NOTE: The external lights can only be turned on with the ignition in the ON/RUN position. Headlights Rotate the end of the multifunction lever upward to the first detent for headlight operation.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE High Beams Daytime Running Lights — If Equipped To activate the Daytime Running Lights (DRL), rotate the With the low beams activated, push the multi- end of the multifunction lever to the O symbol. function lever towards the instrument panel to NOTE: The low beams and side/taillights will not be on turn on the high beams. Pull the multifunction lever with DRL. toward the steering wheel to turn off the high beams.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Lane Change Assist Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. Follow Me Home/Headlight Delay When this feature is selected the driver can choose to have the headlights remain on for a preset period of time.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Deactivation Pull the multifunction lever toward the steering wheel and hold it for more than two seconds. Interior Lights on the right light and press the switch to the left to turn on the left light. CAUTION! Before getting out of the vehicle be sure that the The interior light switches are located in the overhead switch is in the center position or that the lights are console.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 • When the doors are unlocked with the Key Fob a 10 second timer is activated. • When the doors are locked with the Key Fob the lights will turn off. 3 Interior Light Timing (On/Right Position) • When all doors are closed a 15 minute timer is activated. NOTE: The timer is deactivated when the key is moved into the ON/RUN position. Front Fog Lights — If Equipped Fog Light Switch Press the switch once to turn the front fog lights on.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS The windshield wiper/washer lever is located on the right side of the steering column. NOTE: The windshield wipers/washers will only operate with the ignition in the ON/RUN position. Front Windshield Wiper Operation There are five different modes of operation for the front windshield wipers.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 NOTE: The Intermittent function only has one detent Front Windshield Washer Operation but wiper delay will vary with changes in vehicle speed. Pull the windshield wiper/washer lever toward the As vehicle speed increases the delay time will decrease. steering wheel to activate the washers. The wipers will activate automatically for three cycles after the lever is Low Speed released. Push the lever downward to the second detent.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur. Rear Windshield Wiper Rotate the end of the windshield wiper/washer lever upward to the first detent past the intermittent settings for intermittent wipe operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 Rear Windshield Washer Operation Push the windshield wiper/washer lever toward the instrument panel to activate the rear washer. Push and hold the lever for more than a half second and the wipers will activate automatically for three cycles after the lever is released. 3 TILT STEERING COLUMN — IF EQUIPPED This feature allows you to tilt the steering column upward or downward.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death. ELECTRONIC SPEED CONTROL When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 NOTE: In order to ensure proper operation, the Electronic Speed Control system has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control system can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate The speed increment shown is dependant on the speed of U.S. (mph) or Metric (km/h) units: A soft tap on the brake pedal, pushing the CANC button, or normal brake pressure while slowing the vehicle will U.S. Speed (mph) deactivate Electronic Speed Control without erasing the • Pressing the RES (+) button once will result in a 1 mph set speed memory. Pressing the ON/OFF button or increase in set speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 • If the button is continually pressed, the set speed will continue to decrease until the button is released, then When the Electronic Speed Control is set, you can dethe new set speed will be established. crease speed by pushing the SET (-) button. The speed decrement shown is dependant on the speed To Accelerate For Passing To Decrease Speed of U.S. (mph) or Metric (km/h) units: U.S. Speed (mph) Press the accelerator as you would normally.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident. Do not use Electronic Speed Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 Rear Park Assist Sensors Rear Park Assist Alerts The four Rear Park Assist sensors, located in the rear fascia/bumper, monitor the area behind the vehicle that is within the sensors’ field of view.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Audible And Visual Signals Supplied By The Rear Park Assist System SIGNAL Obstacle Distance MEANING An obstacle is present within the sensors’ field of view Failure Sensor or System failures INDICATION Audible signal (dashboard loudspeaker) • Sound pulses emitted at a rate that increases as the distance decreases. • Emits continuous tone at 12 in (30 cm). • Adjustable volume level. (Refer to “Menu Functions” for further information).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 to the sensor in failure condition. If even a single sensor A malfunction of the Rear Park Assist sensors or system fails, the entire system must be disabled. The system is is indicated, during REVERSE gear engagement, by the turned off automatically. instrument panel warning icon and message displayed Cleaning The Rear Park Assist System on the Electronic Vehicle Information Center (EVIC) Clean the Rear Park Assist sensors with water, car wash display.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Jackhammers, large trucks, and other vibrations could affect the performance of Rear Park Assist. CAUTION! • Clean the Rear Park Assist sensors regularly, taking care not to scratch or damage them. The sensors must not be covered with ice, snow, slush, mud, dirt or debris. Failure to do so can result in the system not working properly.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 WARNING! WARNING! (Continued) • Drivers must be careful when backing up even when using the Rear Park Assist system. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. You are responsible for safety and must continue to pay attention to your surroundings. Failure to do so can result in serious injury or death.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED The power sunroof roof switch is located in the overhead console. Power Sunroof Switch WARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location accessible to children. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 To Open Pinch Protect Feature Press and hold the power sunroof switch rearward for approximately one second and the sunroof will stop at the vented position. Press the switch a second time and hold for approximately one second and release, the sunroof will open fully, then stop automatically. This is called “Express Open”. During Express Open operation, any movement of the sunroof switch will stop the sunroof.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Emergency Operation In case of electrical failure the sunroof can be operated with the hex wrench that is located in the glove box. There is a plug located in the rear of the sunroof opening at the center of the vehicle. Removing the plug reveals a hex opening in the motor assembly of the sunroof. Insert the hex wrench and turn, moving the sunroof to the desired location.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Power is available when the ignition switch is in the There is a standard 12 Volt (13 Amp) power outlet, ON/RUN or START position. Insert the cigar lighter or located in the floor console, for added convenience. This accessory plug into the outlet for use. To preserve the heating element, do not hold the lighter in the heating power outlet can power mobile phones, electronics and position. other low power devices.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For rear passengers, there are cupholders located on the For the driver and front passenger, cupholders are lo- floor between the front driver and passenger seats. cated on the floor console between the front seats.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 STORAGE Glove Compartment The glove compartment is located on the right side of the instrument panel. Pull outward on the glove compartment latch to open the glove compartment. Push the glove compartment door upward to close it.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CARGO AREA FEATURES The rear seatbacks have a fold down feature to allow increased cargo capacity. Push down the release button, located at the outboard top of the seatback and move the seatback to its foldeddown position to provide a flat load floor cargo area. When returning the seatback to its upright position, push rearward until the seatback is properly latched.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 REAR WINDOW FEATURES Rear Window Defroster The rear window defroster button is located in the center of the instrument panel, below the radio. Press this button to turn on the rear window defroster. An indicator in the instrument cluster will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after approximately 20 minutes. To manually shut the defroster off, push the button a second time.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ! INSTRUMENT PANEL FEATURES . . . . . . . . . .143 ▫ Change Engine Oil Indicator System . . . . . . . .162 ! INSTRUMENT CLUSTER — POP, LOUNGE, 500C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 ▫ Trip Computer . . . . . . . . . . . . . . . . . . . . . . .163 ! INSTRUMENT CLUSTER — SPORT. . . . . . . . . .145 ! INSTRUMENT CLUSTER DESCRIPTIONS . . . . .146 ! ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) . . . . . . . . . . . . . . . . . . .
142 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Technical Specifications . . . . . . . . . . . . . . . . .180 ▫ Radio Operation . . . . . . . . . . . . . . . . . . . . . .205 ▫ Quick Guide . . . . . . . . . . . . . . . . . . . . . . . . .181 ▫ CD Player Operation . . . . . . . . . . . . . . . . . . .205 ▫ General Information. . . . . . . . . . . . . . . . . . . .184 ▫ Operating Instructions — Hands-Free Phone (If Equipped). . . . . . . . . . . . . . . . . . . . . . . . .205 ▫ Functions And Adjustments . .
UNDERSTANDING YOUR INSTRUMENT PANEL 143 INSTRUMENT PANEL FEATURES 4 1 2 3 4 5 6 — Side Vent — Multifunction Lever – Light Control — Instrument Cluster And Warning Lights — Windshield Wiper, Washer, Trip Computer — Central Air Vents — Storage Compartment/Radio 7 — Passenger Air Bag 8 — Glove Compartment 9 — Rear Defrost Button 10 — Hazard Button 11 — Climate Controls 12 — Power Windows Control 13 14 15 16 — — — — Storage Compartment Shift Lever Sport Button Horn/Driver Airbag
144 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — POP, LOUNGE, 500C
UNDERSTANDING YOUR INSTRUMENT PANEL 145 INSTRUMENT CLUSTER — SPORT 4
146 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Glow Plug Light — If Equipped 2. Rear Defrost Indicator This indicator will illuminate when the rear window defroster is on. The rear window defroster This vehicle will inhibit engine cranking when the automatically turns off after 20 minutes. ambient temperature is less than –22° F (–30° C) and the oil temperature sensor reading indicates an CAUTION! engine block heater has not been used.
UNDERSTANDING YOUR INSTRUMENT PANEL 147 will illuminate and the EVIC will show how long the function remains active. For further information, refer to This indicator will illuminate when the front fog “Follow Me Home” in “Understanding The Features of lights are on. Your Vehicle”. 4. Low Fuel Light 7. Turn Signal Indicator When the fuel level reaches approximately 1.0 The arrow will flash in unison with the exterior gallon (3.
148 UNDERSTANDING YOUR INSTRUMENT PANEL belt is unbuckled, a chime will sound. When driving, if the driver’s seat belt remains unbuckled, the Seat Belt This light will turn on for four seconds as a Reminder Light will illuminate and the chime will sound. bulb check when the ignition switch is first Refer to “Occupant Restraints” in “Things To Know turned to ON/RUN. If the light is either not on Before Starting Your Vehicle” for further information.
UNDERSTANDING YOUR INSTRUMENT PANEL 149 your vehicle may require towing. The light will come on when the ignition is first turned to ON/RUN and remain This light is used to manage the electrical on briefly as a bulb check. If the light does not come on warning of the EPS (Power Steering System). during starting, have the system checked by an authoRefer to “Power Steering” in “Starting and rized dealer. Operating” for further information. 15. Tire Pressure Monitoring Telltale Light 14.
150 UNDERSTANDING YOUR INSTRUMENT PANEL one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.
UNDERSTANDING YOUR INSTRUMENT PANEL 151 CAUTION! (Continued) equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage. Do not use tire sealant from a can or balance beads if your vehicle is equipped with a TPMS, as damage to the sensors may result. the light turns on while driving, stop the vehicle and shut off the engine as soon as possible.
152 UNDERSTANDING YOUR INSTRUMENT PANEL most situations, the vehicle will drive normally and will not require towing. CAUTION! Prolonged driving with the Malfunction Indicator Light (MIL) on could cause damage to the engine control system. It also could affect fuel economy and driveability. If the MIL is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required.
UNDERSTANDING YOUR INSTRUMENT PANEL 153 20. Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the Brake Warning Light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the brake system reservoir. The light will remain on until the cause is corrected. If brake fault is indicated, immediate repair is necessary.
154 UNDERSTANDING YOUR INSTRUMENT PANEL 21. Electronic Stability Control OFF (ESC OFF) Indica- NOTE: tor Light • The ESC Off Indicator Light and the ESC Activation/ Malfunction Indicator Light come on momentarily This light indicates the Electronic Stability Coneach time the ignition switch is turned to ON/RUN. trol system (ESC) has been turned off by the driver. • Each time the ignition is turned to ON/RUN, the ESC system will be on, even if it was turned off 22.
UNDERSTANDING YOUR INSTRUMENT PANEL 155 If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes. If the ABS light does not turn on when the ignition switch is turned to the ON/RUN position, have the light inspected by an authorized dealer. If with the engine running the warning light flashes, this means that the car is not protected by the engine inhibitor device. Contact a Fiat dealer to have all the keys programmed. 26.
156 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! (Continued) temperature gauge are lit, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If you hear continuous chimes, turn the engine off immediately and call an authorized dealer for service. WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant.
UNDERSTANDING YOUR INSTRUMENT PANEL 157 NOTE: If the vehicle is equipped with the Electronic Vehicle Information Center (EVIC) in the instrument cluster, all warnings including “door” and “gate” and “Change Engine Oil” will only be displayed in the EVIC display. Refer to “Electronic Vehicle Information Center (EVIC) in “Understanding Your Instrument Panel.” 28. Fuel Gauge / Fuel Door Reminder 29.
158 UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) The EVIC consists of the following: • System Status The Electronic Vehicle Information Center (EVIC) fea• Vehicle Information Warning Message Displays tures a driver-interactive display that is located in the instrument cluster.
UNDERSTANDING YOUR INSTRUMENT PANEL 159 EVIC Displays 4 Premium Instrument Cluster SPORT Instrument Cluster 1 2 3 4 5 — — — — — Temperature Indicator Fuel Level Gauge Clock Odometer Sport Mode 6 — Message Display 7 — Coolant Temperature Gauge 8 — Digital Speedometer 9 — Ice Warning Indicator 10 — Gear Shift Indicator (GSI) 1 2 3 4 5 — — — — — Ice Warning Indicator Temperature Indicator Fuel Level Gauge Clock Odometer 6 — Message Display 7 — Coolant Temperature Gauge 8 — Digital Speedometer 9 — Aut
160 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: When opening one of the front doors, the EVIC display will turn on the clock and the miles or kilometers Press the MENU button briefly to access the menu covered (for versions/markets, where provided) for a and/or go to next screen or to confirm the required menu few seconds. option. Press and hold the MENU button (approximately one second) to return to the main screen.
UNDERSTANDING YOUR INSTRUMENT PANEL 161 • Set Date • Exit Menu • See Radio Selecting An Option Of The Main Menu Without Submenu • Autoclose 1. Briefly press the MENU button to select the main menu option to set. • Speed Display • Units or DOWN button (by single 2. Press the UP presses) to select the new setting. • Buzzer Volume 3. Briefly press the MENU button to store the new setting and go back to the main menu option previously selected. • Daylights (D.R.L.
162 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Briefly press the MENU button to select the displayed scheduled oil change interval. The engine oil change submenu option and to open the relevant setup menu. indicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent or DOWN button (by single 4. Press the UP upon your personal driving style. presses) to select the new setting for this submenu Unless reset, this message will continue to display each option.
UNDERSTANDING YOUR INSTRUMENT PANEL 163 NOTE: If the indicator message illuminates when you New Trip start the vehicle, the oil change indicator system did not To reset: reset. If necessary, repeat this procedure. • Push and hold the TRIP button to reset the system Trip Computer manually. The Trip Computer is located in the instrument cluster. It • When the “Trip distance” reaches 99999.9 miles or features a driver-interactive display (displays informakilometers or when the “Travel time” reaches 999.
164 UNDERSTANDING YOUR INSTRUMENT PANEL Start Of Trip Procedure • Trip distance A With the ignition on, push and hold the TRIP button for • Average consumption over one second to reset. • Instantaneous consumption Exit Trip • Average speed A To exit the Trip function, wait until all the values have been displayed or hold the MENU button for longer than • Travel time A (driving time) one second.
UNDERSTANDING YOUR INSTRUMENT PANEL 165 Values Displayed Average Consumption Range This value shows the approximate average consumption since the last reset. This indicates the distance which may be traveled with the fuel remaining in the tank, assuming that driving Instant Consumption conditions will not change. The message “----” will This indicates the fuel consumption. The value is conappear on the display in the following cases: stantly updated.
166 UNDERSTANDING YOUR INSTRUMENT PANEL Personal Settings (Customer-Programmable Features) Dimmer 2. Briefly press the MENU button to go back to the menu screen or press and hold the MENU (approximately one second) to go back to the main screen without storing settings.
UNDERSTANDING YOUR INSTRUMENT PANEL 167 3. When the function is activated (On), briefly press the To cancel the setting, proceed as follows: MENU button to display the presently set activation 1. Briefly press the MENU button. “On” will flash on the or DOWN buttons speed. Pressing the UP display. selects the speed limit. Press MENU to confirm button. “Off” will flash on the 2. Press the DOWN selection. display.
168 UNDERSTANDING YOUR INSTRUMENT PANEL or DOWN button to select 3. Select the required option and then press the MENU 2. Press the UP Trip B data. Press the UP or DOWN buttons button. to turn ON or OFF 4. When accessing the “Time” sub-menu item, briefly 3. Briefly press the MENU button to go back to the menu press the MENU button and “hours” will flash on the screen, or press and hold the MENU button (approxidisplay. mately one second) to go back to the main screen or DOWN button for setting. 5.
UNDERSTANDING YOUR INSTRUMENT PANEL 169 • Briefly press the MENU button to return to the 1. Briefly press the MENU button. Press the UP or “Time” sub-function. button to highlight Date, press the DOWN MENU button and Year will begin to flash. • When accessing the “Mode” submenu, briefly press the MENU button. The previously set display format 2. Press the UP or DOWN button for setting. will flash on the display. 3.
170 UNDERSTANDING YOUR INSTRUMENT PANEL • Briefly press the MENU button to go back to the menu 3. Briefly press the MENU button to go back to the menu screen, or press and hold the MENU button (approxiscreen, or press and hold the MENU button (approximately one second) to go back to the main screen mately one second) to go back to the main screen without storing the settings. without storing the settings.
UNDERSTANDING YOUR INSTRUMENT PANEL 171 2. Press the UP or DOWN button to select 3. Briefly press the MENU button to go back to the menu display deactivation “Off”, “MPH” or “km/h”. screen, or press and hold the MENU button (approximately one second) to go back to the main screen 3. Briefly press the MENU button to go back to the menu without storing the settings. screen, or press and hold the MENU button (approxiUnits (Set Units) mately one second) to go back to the main screen.
172 UNDERSTANDING YOUR INSTRUMENT PANEL 4. When accessing the “Distance” submenu: briefly press 2. Briefly press the MENU button to return to the the MENU button. Either “mi” or “km” will appear on sub-menu. the display (according to the previous setting). 3. When accessing the “Temperature” submenu: briefly or DOWN button for setting. 5. Press the UP press the MENU button. Either “°F” or “°C” will appear on the display (according to the previous 6. Briefly press the MENU button to return to the setting).
UNDERSTANDING YOUR INSTRUMENT PANEL 173 Language (Selecting The Language) Buzzer Volume (Adjusting The Failure/Warning The messages can be displayed in the following lan- Buzzer Volume) guages: Italian, English, Turkce, Nederlands, Spanish, With this function the volume of the buzzer accompanying any failure/warning indication can be adjusted to French, Dutch, Polish, Brasilian. one of eight volume levels. To set the required language, proceed as follows: To adjust the volume proceed as follows: or 1.
174 UNDERSTANDING YOUR INSTRUMENT PANEL Button Volume (Button Volume Adjustment) Belt Buzzer (Buzzer Activation For S.B.R. This function may be used to adjust the volume of the Indication) or This function will only be displayed after a FIAT Group beep accompanying the buttons. MENU, UP buttons can be adjusted according to 8 Automobiles dealership has deactivated the S.B.R. system. DOWN levels.
UNDERSTANDING YOUR INSTRUMENT PANEL 175 4. Briefly press the MENU button to go back to the menu To set the required unit, proceed as follows: screen, or press and hold the button (approximately 1. Briefly press the MENU button to display the two one second) to go back to the main screen without sub-menus. storing the settings. 2. Press the UP or DOWN button to navigate GSI (Gear Shift Indicator) the two sub-menus.
176 UNDERSTANDING YOUR INSTRUMENT PANEL Hill Start Assist Tire Pressure This function is used when starting a vehicle from a stop on a hill. Hill Start Assist maintains the same level of brake pressure the driver applied for a short period of time after the foot has been removed from the brake pedal. This function will be used to display the tire pressures individually for all four tires by location. Proceed as follows to switch this function on or off: Proceed as follows: or 1.
UNDERSTANDING YOUR INSTRUMENT PANEL 177 Entry (RKE) transmitter UNLOCK button. When Unlock SALES CODE (RAB) RADIO Drivers Door is selected, you must press the RKE transmitter UNLOCK button twice to unlock the passenger door. When All Doors is selected, both of the doors will unlock on the first press of the RKE transmitter UNLOCK button. To make your selection, press and release the SELECT button until “Unlock Driver Door” or “All Doors” appears. Exit Menu This function closes the initial menu screen.
178 UNDERSTANDING YOUR INSTRUMENT PANEL Introduction The radio has been designed according to the specifications of the passenger compartment, with a personalized design to match the style of the dashboard. If the radio has BLUE&ME™, refer to the appropriate “BLUE&ME™ User’s Manual” for further information. The instructions for use are given below and we recommend you to read them carefully. Suggestions Road Safety mountains, buildings or bridges, or when you are far away from the broadcaster.
UNDERSTANDING YOUR INSTRUMENT PANEL 179 • Do not stick labels on the CD surface or write on the recorded surface with pencils or pens. The presence of dirt, scratches or distortions on the CDs could cause skipping and poor sound quality while it is • Do not use CDs that are very scratched, flawed, playing. For optimal playback conditions, follow these distorted, etc. Using discs like these will result in guidelines: malfunctions or damage to the player. CDs • Only use branded CDs.
180 UNDERSTANDING YOUR INSTRUMENT PANEL copied is often shown in very small letters or is • Two 100 mm diameter full range speakers, one speaker in each of the rear side panels. difficult to read on the actual CD cover where it may be, for example, “COPY CONTROL,” “COPY PRO• Antenna on the car roof. TECTED,” “THIS CD CANNOT BE PLAYED ON A • Radio with CD/MP3 player. PC/MAC.
UNDERSTANDING YOUR INSTRUMENT PANEL 181 Quick Guide Radio Controls BUTTON TUNER A-B-C MEDIA GENERAL FUNCTIONS On Off AM, FM, SAT (if equipped) source selection Cycles A, B, C presets for AM, FM, SAT (if equipped) CD/AUX/Media Player (if equipped and present) source selection MODE Short button press Short button press Short repeated button press Short repeated button press Short repeated button press 4
182 UNDERSTANDING YOUR INSTRUMENT PANEL BUTTON (Mute/Pause Button) AUDIO GENERAL FUNCTIONS Volume activation/deactivation (Mute/Pause) MODE Short button press Menu activation: short button press or Adjustment type selection: press Adjustment of values: press or MENU Audio adjustments: low tones (BASS), high tones (TREBLE), left/ right balance (BALANCE), front/ rear balance (FADER) Song, Artist, Album, Genre, Playlist, Folder information (if available) in CD, Media Player and Satellite (if so equipped);
UNDERSTANDING YOUR INSTRUMENT PANEL 183 BUTTON RADIO FUNCTIONS Radio Station Search: • Automatic Search • Manual Search 12345 Current radio station storing Stored station recall BUTTON CD FUNCTIONS CD ejection Previous/next track play CD track fast forward/rewind Previous/next folder play (for CDMP3) MODE Automatic search: press buttons or (long press for fast forward) Manual search: press buttons or (long press for fast forward) Long button press for memory preset 1 to 5 respectively Short button pr
184 UNDERSTANDING YOUR INSTRUMENT PANEL General Information CD Section The radio offers the following functions: • Track selection (forward/backward) Radio Section • PLL tuning with FM/AM bands • RBDS (Radio Broadcast Data System) • Automatic/manual station tuning • FM Multipath detector • Manual storing of 25 stations (base radio) and 40 stations (if equipped with Satellite): 15 on FM band (5 on FMA, 5 on FMB, 5 on FMC), 10 on AM band (5 on AMA, 5 on AMB), 15 on Satellite Band - if equipped (5 on SA
UNDERSTANDING YOUR INSTRUMENT PANEL 185 CD/MP3 Section • MP3-Info function (ID3-TAG) • Folder selection (previous/next) • Track selection (forward/backward) • Fast forward/rewind through tracks • Separate bass/treble tone adjustment • Right/left channel balancing • Front/rear fader Functions And Adjustments Turning The Car Radio On (ON/OFF) button • MP3 Display function: display of folder name, ID3- The car radio comes on when the is pressed briefly.
186 UNDERSTANDING YOUR INSTRUMENT PANEL button again to deactivate the MUTE Press the function. The volume will gradually increase until it By pressing the TUNER button briefly and repeatedly, reaches the previously set level. the following audio sources can be selected cyclically: When the volume level is changed using the dedicated • AM, FM and Satellite Bands (if equipped) controls, the Mute function is deactivated and the volSelecting The CD Function ume is adjusted to the new level selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 187 Use the buttons or to scroll through the Menu • USER EQUALIZER — If equipped (customized equalization adjustment) functions. To change the setting of the selected funcor buttons. tion, use the Tone Adjustment The current status of the selected function appears on the Proceed as follows: display. 1. Press AUDIO button. The functions managed by the Audio Menu are: or button to select “Bass,” “Mid2.
188 UNDERSTANDING YOUR INSTRUMENT PANEL or 2. Press the AUDIO menu. button to set “Balance” in the 3. Press the button to increase the sound coming from the rear speakers or the button to increase the sound coming from the front speakers. 3. Press the button to increase the sound from the button to increase the sound By pressing the or buttons briefly, the levels will left speakers or the from the right speakers. change progressively. By pressing them down longer, the levels will change quickly.
UNDERSTANDING YOUR INSTRUMENT PANEL 189 Preset/User/Classic/Rock/Jazz Functions — If Equipped When one of the equalizer adjustments is activated the wording “EQ” lights up. The built-in equalizer can be activated/deactivated. When the equalizer function is off, the audio settings can only be changed by adjusting the “Bass” and “Treble” settings, whereas when the function is on, the acoustic curves can be adjusted. To deactivate the equalizer, select the “EQ Preset” function in the audio menu.
190 UNDERSTANDING YOUR INSTRUMENT PANEL Menu MENU Button Functions • SiriusXM Telephone Number • System Reset Press the MENU button briefly to activate the Menu • Speed Volume function. • On Volume Limit or buttons to scroll through the menu Use the Press the MENU button again to exit the Menu function. functions. To change the setting of the selected funcor buttons.
UNDERSTANDING YOUR INSTRUMENT PANEL 191 • High: function activated (high sensitivity) On Volume Limit • “On volume limit: off” – The radio will come on at the same volume as before it was switched off. The volume level can be between 0 and 40. This function makes it possible to activate/deactivate the or to change the setting. Use the buttons maximum volume limit when turning the radio on.
192 UNDERSTANDING YOUR INSTRUMENT PANEL The chosen mode appears on the display: on the display. At the end of the operation, the source does not change and the previous situation will be displayed. • “Radio off: 00 min” — The radio turns off in connection with the ignition key; the radio is turned automatically off as soon as the key is turned to the STOP Radio position.
UNDERSTANDING YOUR INSTRUMENT PANEL 193 Frequency Band Selection • 15 in SAT (if so equipped) (5 SATA, 5 SATB, 5 SATC) With the Radio mode active, press the FM or AM tuner To listen to a preset station, select the desired frequency button briefly and repeatedly to select the desired recep- band and then briefly press the corresponding preset tion band. button (from 1 to 5).
194 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Tuning This is used to manually search for stations in the preselected band. Select the desired frequency band and then press briefly or button to start the search in and repeatedly the or button is pressed the desired direction. If the longer, the fast search starts and then stops when the button is released. Stereophonic Broadcasters If the incoming signal is weak, the reproduction is automatically switched from Stereo to Mono.
UNDERSTANDING YOUR INSTRUMENT PANEL 195 SiriusXM Satellite Radio Program Types Program Types can be selected by pressing the or buttons. The Program Type will change to the next category and the radio will then tune to first station in or buttons will tune that program type. Pressing to only the stations in that program type. Re-Subscribe To SiriusXM Satellite Radio New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with their radio.
196 UNDERSTANDING YOUR INSTRUMENT PANEL your service, either call the number listed on the display Sirius Subscription Issues When Replacing A or visit the provider online. Sirius Radio CAUTION! Neither SIRIUS nor FIAT is responsible for any errors in accuracies in the SIRIUS data services or its use in vehicles. When a radio needs to be replaced, the dealer will need the SIRIUS information to order a new radio (even if the SIRIUS subscription has lapsed). The ESN number contains 12 digits.
UNDERSTANDING YOUR INSTRUMENT PANEL 197 Satellite Radio Antenna — If Equipped CD Player Selection The antenna for the satellite radio is mounted on the roof of the vehicle. Do not place items on the roof around the roof top antenna location. Objects placed within the line of sight of the antenna will cause decreased performance. Larger luggage items should be placed as far from the antenna as possible. Do not place items directly on or above the antenna.
198 UNDERSTANDING YOUR INSTRUMENT PANEL If the CD is not removed from the radio, it will automatiTo load the CD, insert it gently into the slot to activate the cally be reloaded about 20 seconds later but will not motorized loading system, which will position it cor- resume playing until the #MEDIA# button is pressed to select the CD mode. The radio will switch to the last rectly. source prior to CD mode. The CD can be loaded with the radio off and the ignition key turned to ON/RUN.
UNDERSTANDING YOUR INSTRUMENT PANEL 199 Display Information Track Fast Forward/Rewind When the CD player is operating, information will ap- Keep the button pressed down to fast forward the button pressed down to pear on the display with the following meaning: selected track and keep the fast rewind the track. The fast forward/rewind will • “Track 5” indicates the CD track number. stop once the button is released.
200 UNDERSTANDING YOUR INSTRUMENT PANEL • The sampling frequencies that can be reproduced are: 44.1 kHz, stereo (from 96 to 320 kbit/s) – 22.05 kHz, In addition to playing regular audio CDs, the radio is also mono or stereo (from 32 to 80 kbit/s). enabled to play CDROMs on which compressed audio files have been recorded in an MP3 format. • Tracks with a variable bit-rate can be reproduced.
UNDERSTANDING YOUR INSTRUMENT PANEL 201 NOTE: When the function is activated the radio may take Selection Of Next/Previous Folder a few seconds to start playing. While checking the disc Press the button to select a next folder or the the display will show “CD Reading.” If no MP3 files are button to select the previous folder. The display detected, the radio will resume playing the audio session will show the number of the folder. from the point where it was interrupted. The folders are selected cyclically.
202 UNDERSTANDING YOUR INSTRUMENT PANEL • If the MP3 files on a CD-ROM are structured in CD Player sub-folders their structure is compressed to a single The CD Does Not Play: level structure, where the sub-folders are taken to the The CD is dirty. Clean the CD. level of the main folders. The CD is scratched. Try using another CD. Troubleshooting General The CD Can Not Be Loaded: Sound Volume Low A CD is already loaded. Press the the CD.
UNDERSTANDING YOUR INSTRUMENT PANEL 203 Operating Instructions — Hands-Free Phone (If Equipped) Refer to the appropriate “BLUE&ME™ User’s Manual” for further information. Personal/Portable Navigation Device (PND) — If Equipped 4 A Personal/Portable Navigation Device (PND) is available as optional equipment for this vehicle, refer to the Navigation User Guide for further information.
204 UNDERSTANDING YOUR INSTRUMENT PANEL The right-hand control is a rocker-type switch with a The remote sound system controls are located on the rear pushbutton in the center and controls the volume and surface of the steering wheel. Reach behind the wheel to mode of the sound system. Pressing the top of the rocker switch will increase the volume, and pressing the bottom access the switches. of the rocker switch will decrease the volume.
UNDERSTANDING YOUR INSTRUMENT PANEL 205 Radio Operation Operating Instructions — Hands-Free Phone (If Pressing the top of the switch will “Seek” up for the next Equipped) listenable station and pressing the bottom of the switch Refer to the appropriate Blue&Me™ User’s Manual for further information. will “Seek” down for the next listenable station.
206 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Do not use solvents such as benzene, thinner, cleaners, RADIO OPERATION AND MOBILE PHONES or anti-static sprays. Under certain conditions, the mobile phone being on in your vehicle can cause erratic or noisy performance from 5. Store the disc in its case after playing. your radio. This condition may be lessened or eliminated 6. Do not expose the disc to direct sunlight. by relocating the mobile phone antenna. This condition is 7.
UNDERSTANDING YOUR INSTRUMENT PANEL 207 Manual Heating And Air Conditioning 1. Temperature Control Rotate this control to regulate the temperature of the air inside the passenger compartment. Rotating the dial to the left into the blue area of the scale indicates cooler temperatures, while rotating to the right into the red area indicates warmer temperatures. 2. Blower Control Rotate this control to regulate the amount of air forced through the ventilation system in any mode.
208 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • Continuous use of the Recirculation mode may make the inside air stuffy and window fogging may occur. Extended use of this mode is not recommended. • Panel Air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow.
UNDERSTANDING YOUR INSTRUMENT PANEL 209 require extra heat to the windshield. This setting is good for maintaining comfort while reducing moisture on the windshield. • Defrost Air is directed through the windshield and side window demister outlets. Use this mode with maximum blower and temperature settings for best windshield and side window defrosting. MAX A/C For maximum cooling, use the A/C and recirculation modes at the same time.
210 UNDERSTANDING YOUR INSTRUMENT PANEL 2. A/C Button Press and release to change the current Air Conditioning (A/C) setting. Performing this function will cause the ATC to switch into manual mode. 3. Temperature Control Up Button Provides temperature up control. Push the button for warmer temperature settings. 4. Blower Control Up Button Automatic Temperature Control (ATC) 1. AUTO Temperature Control (ATC) Button Controls airflow, temperature, distribution, and air recirculation automatically.
UNDERSTANDING YOUR INSTRUMENT PANEL 211 reducing moisture on the windshield. Performing this NOTE: The center instrument panel outlets can be aimed function will cause the ATC to switch into manual mode. so that they are directed toward the rear seat passengers for maximum airflow to the rear. 6. Front Defrost 9. Blower Control Down Button Press and release to change the current setting. The indicator illuminates when ON. The blower will auto- There are 12 blower speeds.
212 UNDERSTANDING YOUR INSTRUMENT PANEL 3. When the system is set up for your comfort level, it is not necessary to change the settings. You will experi• When in Defrost mode, the Recirculation button will ence the greatest efficiency by simply allowing the flash if pressed. This indicates that you can not system to function automatically. proceed to this mode due to fogging risk. • When the Auto indicator is on and the Recirculation NOTE: NOTE: indicator is off, the Recirculation is in AUTO mode.
UNDERSTANDING YOUR INSTRUMENT PANEL 213 on low until the engine warms up. The blower will up button and decreases when you press or hold the blower control down button. increase in speed and transition into AUTO mode. The blower fan speed can be set to any fixed speed by This system offers a full complement of manual override pressing the blower control up or down buttons. The fan will now operate at a fixed speed until additional speeds features. are selected.
214 UNDERSTANDING YOUR INSTRUMENT PANEL Floor Mode Defrost Mode Air comes from the floor outlets. A slight amount Air comes from the windshield and side window of air is directed through the defrost and side demister outlets. Use Defrost mode with maxiwindow demister outlets. mum temperature settings for best windshield and side window defrosting. When the defrost mode is selected, Bi-Level the blower will automatically default to medium-high. Air is directed through the panel and floor outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL 215 outlets. If Economy mode is desired, press the A/C this button is selected. Push the button a second time to button to turn off the A/C mode in the ATC display and turn off the Recirculation mode LED and allow outside air into the vehicle. deactivate the A/C system. NOTE: • If the system is in Mix or Defrost Mode, the A/C can be turned off, but the A/C system shall remain active to prevent fogging of the windows.
216 UNDERSTANDING YOUR INSTRUMENT PANEL Regular cleaning of the inside of the windows with a non-filming cleaning solution (vinegar and water works Window Fogging very well) will help prevent contaminates (cigarette Windows will fog on the inside when the humidity inside smoke, perfumes, etc.) from sticking to the windows. the vehicle is high. This often occurs in mild or cool Contaminates increase the rate of window fogging. temperatures when it’s rainy or humid.
UNDERSTANDING YOUR INSTRUMENT PANEL 217 Your air conditioning system is also equipped with an automatic recirculation system. When the system senses a heavy load or high heat conditions, it may use Recirculation A/C mode to provide additional comfort while in automatic mode. Vacation Storage Anytime you store your vehicle, or keep it out of service (i.e., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in the fresh air using the high blower setting.
STARTING AND OPERATING CONTENTS ! STARTING PROCEDURES . . . . . . . . . . . . . . . .223 ▫ Five-Speed Manual Transmission. . . . . . . . . . .226 ▫ Manual Transmission — If Equipped . . . . . . .223 ▫ Recommended Shift Speeds . . . . . . . . . . . . . .228 ▫ Automatic Transmission — If Equipped . . . . .223 ▫ Downshifting . . . . . . . . . . . . . . . . . . . . . . . .229 ▫ Normal Starting. . . . . . . . . . . . . . . . . . . . . . .223 ! AUTOMATIC TRANSMISSION — IF EQUIPPED . . . . . . . . . . . . .
220 STARTING AND OPERATING ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .238 ! ELECTRONIC BRAKE CONTROL SYSTEM . . . .249 ! DRIVING ON SLIPPERY SURFACES . . . . . . . . .240 ▫ Four-Wheel Anti-Lock Brake System (ABS) . . .249 ▫ Acceleration . . . . . . . . . . . . . . . . . . . . . . . . .240 ▫ Brake Assist System (BAS) . . . . . . . . . . . . . . .250 ▫ Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . .240 ▫ Traction Control System (TCS) . . . . . . . . . . . .
STARTING AND OPERATING 221 ! TIRES — GENERAL INFORMATION . . . . . . . .269 ! TIRE ROTATION RECOMMENDATIONS . . . . .282 ▫ Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . .269 ! TIRE PRESSURE MONITORING SYSTEM (TPMS) . . . . . . . . . . . . . . . . . . . . . . . . . ▫ Tire Inflation Pressures . . . . . . . . . . . . . . . . .270 ▫ Base System . . . . . . . . . . . . . . . . . . . . ▫ Tire Pressures For High Speed Operation . . . .272 ▫ Enhanced System — If Equipped . . . . .
222 STARTING AND OPERATING ▫ Materials Added To Fuel . . . . . . . . . . . . . . . .296 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . .299 ▫ Fuel System Cautions. . . . . . . . . . . . . . . . . . .296 ! TRAILER TOWING . . . . . . . . . . . . . . . . . . . . .299 ▫ Carbon Monoxide Warnings . . . . . . . . . . . . .297 ! RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) . . . . . . . . . . . . . . . . . . .300 ! ADDING FUEL . . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 223 STARTING PROCEDURES Manual Transmission — If Equipped Before starting your vehicle, adjust your seat, adjust both Apply the parking brake, place the shift lever in NEUinside and outside mirrors, and fasten your seat belts. TRAL, and press the clutch pedal before starting the vehicle. This vehicle is equipped with a clutch interlocking ignition system. It will not start unless the clutch WARNING! pedal is pressed to the floor.
224 STARTING AND OPERATING Turn the ignition switch to the AVV/ACC (START) position and release it when the engine starts. If the engine fails to start within 10 seconds, turn the ignition switch to the STOP (OFF/LOCK) position, wait 10 to 15 seconds, then repeat the “Normal Starting” procedure.
STARTING AND OPERATING 225 3. If the engine fails to start within 10 seconds, cycle the ignition to the STOP (OFF/LOCK) position, wait five seconds to allow the starter to cool, then repeat the Extended Park Starting procedure. 4. If the engine fails to start after 8 attempts, allow the starter to cool for at least 10 minutes, then repeat the procedure. If Engine Fails To Start WARNING! Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle.
226 STARTING AND OPERATING Turbocharger “Cool Down” This vehicle is equipped with an after-run pump to cool the turbocharger after the engine is shut off. Depending on the type of driving and the amount of cargo, the pump will run for up to 10 minutes after the engine has been shut off to circulate coolant through the turbocharger. Although the pump is rubber-mounted for quiet operation, it is normal to hear it running during this time.
STARTING AND OPERATING 227 NOTE: To shift into REVERSE from NEUTRAL, lift the REVERSE gear is not synchronized and the vehicle must ring under the knob and, at the same time move the be at a complete stop to shift into REVERSE gear. When gearshift lever to the right and then backward. selecting REVERSE gear, the driver should pause (approximately 2 seconds) after pushing in the clutch pedal Use each gear in numerical order; do not skip a gear.
228 STARTING AND OPERATING Recommended Shift Speeds To use your manual transmission for optimal fuel economy, it should be upshifted as listed in the following table. Engine Size 1.4L/1.
STARTING AND OPERATING 229 When turning a corner or driving up a steep grade, Proper downshifting will improve fuel economy and downshift early so that the engine will not be overburdened. prolong engine life. Downshifting CAUTION! If you skip a gear while downshifting or downshift at too high of a vehicle speed, these conditions may cause the engine to overspeed if too low of a gear is selected and the clutch pedal is released.
230 STARTING AND OPERATING NOTE: You must press and hold the brake pedal while shifting out of PARK. WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and your foot is firmly pressing the brake pedal.
STARTING AND OPERATING 231 WARNING! (Continued) • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the transmission gear selector. • Do not leave the ignition key in or near the vehicle (or in a location accessible to children).
232 STARTING AND OPERATING The electronically-controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefore, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers). Shift Lever Only shift from DRIVE to PARK or REVERSE when the accelerator pedal is released and the vehicle is stopped.
STARTING AND OPERATING 233 NOTE: If the shift lever cannot be moved to the PARK, REVERSE, or NEUTRAL position (when pushed forward) it is probably in the AutoStick® (+/-) position (beside the DRIVE position). In AutoStick® mode, the transmission gear (1, 2, 3, etc.) is displayed in the instrument cluster. Move the shift lever to the right (into the DRIVE [D] position) for access to PARK, REVERSE, and NEUTRAL. Gear Ranges PARK (P) This range supplements the parking brake by locking the transmission.
234 STARTING AND OPERATING WARNING! WARNING! (Continued) • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • Your vehicle could move and injure you and others if it is not completely in PARK. Check by trying to move the shift lever out of PARK with the brake pedal released. Make sure the transmission is in PARK before leaving the vehicle.
STARTING AND OPERATING 235 WARNING! (Continued) CAUTION! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever. • Do not leave the ignition key/Key Fob in or near the vehicle, or in a location accessible to children.
236 STARTING AND OPERATING • Look at the transmission gear position display and verify that it indicates the PARK position. WARNING! • With brake pedal released, verify that the shift lever will not move out of PARK. Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. REVERSE (R) This range is for moving the vehicle backward.
STARTING AND OPERATING 237 range of torque converter clutch engagement. This is This range should be used for most city and highway done to prevent transmission damage due to overheatdriving. It provides the smoothest upshifts and down- ing. shifts, and the best fuel economy. The transmission During cold temperatures, transmission operation may automatically upshifts through all forward gears. The be modified depending on engine coolant temperature.
238 STARTING AND OPERATING In the event of a momentary problem, the transmission If the transmission cannot be reset, authorized dealer can be reset to regain all forward gears by performing the service is required. following steps: AUTOSTICK® 1. Stop the vehicle. AutoStick® is a driver-interactive transmission feature 2. Shift the transmission into PARK. providing manual shift control, giving you more control of the vehicle. AutoStick® allows you to maximize en3.
STARTING AND OPERATING 239 forward (-) triggers a downshift, and rearward (+) an upshift. The current gear is displayed in the instrument cluster. in snow or icy conditions. To select second or third gear after the vehicle is brought to a stop, tap the shift lever rearward (+) once or twice. NOTE: In AutoStick® mode, the transmission will only • The system will ignore shift commands that would shift up or down when the driver moves the shift lever cause engine lugging or overspeed.
240 STARTING AND OPERATING WARNING! WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury. Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. You could lose control of the vehicle and possibly have a collision.
STARTING AND OPERATING 241 2. Slow down if the road has standing water or puddles. Flowing/Rising Water 3. Replace the tires when tread wear indicators first become visible. 4. Keep tires properly inflated. 5. Maintain sufficient distance between your vehicle and the vehicle in front of you to avoid a collision in a sudden stop. DRIVING THROUGH WATER WARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off).
242 STARTING AND OPERATING WARNING! CAUTION! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes.
STARTING AND OPERATING 243 CAUTION! (Continued) • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water. Do not continue to operate the vehicle if any fluid appears contaminated, as this may result in further damage.
244 STARTING AND OPERATING If the Steering icon is displayed and the “POWER STEER- NOTE: ING SYSTEM OVER TEMP” message is displayed on the • Even if the power steering assistance is no longer EVIC screen, they indicate that extreme steering maneuoperational, it is still possible to steer the vehicle. vers may have occurred which caused an over temperaUnder these conditions there will be a substantial ture condition in the power steering system.
STARTING AND OPERATING 245 When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. The parking brake should always be applied whenever the driver is not in the vehicle. WARNING! Parking Brake When the parking brake is applied with the ignition switch in the MAR (ACC/ON/RUN) position, the Brake Warning Light in the instrument cluster will illuminate.
246 STARTING AND OPERATING WARNING! (Continued) CAUTION! • Do not leave the Key Fob in or near the vehicle or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle. • Be sure the parking brake is fully disengaged before driving; failure to do so can lead to brake failure and a collision. • Always fully apply the parking brake when leaving your vehicle, or it may roll and cause damage or injury.
STARTING AND OPERATING 247 1. To activate the Sport mode, press the SPORT button. Once activated, a SPORT message will be displayed in the instrument cluster. 2. Momentarily release the accelerator pedal. 3. Press the accelerator pedal again to activate. Automatic Transmission — If Equipped The Sport mode increases steering feedback to the driver with slight increase in effort and changes the transmission shift schedules for more aggressive shifting.
248 STARTING AND OPERATING 1. To activate the Sport mode, press the SPORT button. BRAKE SYSTEM In the event power assist is lost for any reason (for example; repeated brake applications with the engine off), the brakes will still function. The effort required to brake the vehicle will be significantly more than that required with the power system operating. SPORT Button Once activated, a SPORT message will be displayed in the instrument cluster. 2.
STARTING AND OPERATING 249 The ABS includes an amber ABS Warning Light. When the light is illuminated, the ABS is not functioning. The Your vehicle is equipped with a advanced electronic system reverts to standard non-anti-lock brakes. Turning brake control system that includes the Anti-Lock Brake the ignition Off and On again may reset the ABS if the System (ABS), Brake Assist System (BAS), Traction Confault detected was only momentary.
250 STARTING AND OPERATING WARNING! (Continued) Brake Assist System (BAS) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sensing the rate and amount of brake application and then applies optimum pressure to the brakes. This can help reduce braking distances. The BAS complements the Anti-Lock Brake System (ABS). Applying the brakes very quickly results in the best BAS assistance.
STARTING AND OPERATING 251 WARNING! • The Brake Assist System (BAS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. • The BAS cannot prevent collisions, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
252 STARTING AND OPERATING system will release brake pressure in proportion to the amount of throttle applied as the vehicle starts to move in the intended direction of travel. HSA Activation Criteria The following criteria must be met in order for HSA to activate: • Vehicle must be stopped. WARNING! There may be situations on minor hills with a loaded vehicle, or while pulling a trailer, when the system will not activate and slight rolling may occur.
STARTING AND OPERATING 253 • Understeer - when the vehicle is turning less than appropriate for the steering wheel position. This system enhances directional control and stability of the vehicle under various driving conditions. ESC corrects for oversteering or understeering of the vehicle by applying the brake of the appropriate wheel to assist in counteracting the oversteering or understeering condition. Engine power may also be reduced to help the vehicle maintain the desired path.
254 STARTING AND OPERATING WARNING! ESC Off Switch (Manual Transmission) NOTE: The ESC Off switch is located left of the steering column (Manual Transmission Only). The Electronic Stability Control (ESC) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESC cannot prevent all accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
STARTING AND OPERATING 255 ESC Operating Modes The ESC system has two available operating modes. Full On This is the normal operating mode for ESC. Whenever the vehicle is started, the ESC system will be in On mode. This mode should be used for most driving situations. ESC should only be turned to Partial Off for specific reasons as noted below. Partial Off This mode is entered by momentarily pressing the ESC Off switch.
256 STARTING AND OPERATING WARNING! • When in “Partial Off” mode, the TCS functionality of ESC, (except for the limited slip feature described in the TCS section), has been disabled and the “ESC Off Indicator Light” will be illuminated. When in “Partial Off” mode, the engine power reduction feature of TCS is disabled, and the enhanced vehicle stability offered by the ESC system is reduced. on continuously with the engine running, a malfunction has been detected in the ESC system.
STARTING AND OPERATING 257 NOTE: TIRE SAFETY INFORMATION • The ESC Activation/Malfunction Indicator Light and Tire Markings the ESC OFF Indicator Light come on momentarily each time the ignition switch is turned ON. • Each time the ignition is turned ON, the ESC system will be ON even if it was turned off previously. 5 The ESC OFF Indicator Light indicates the Electronic Stability Control (ESC) is partially off. 1 — U.S.
258 STARTING AND OPERATING • Temporary spare tires are designed for temporary emergency use only. Temporary high pressure com• P (Passenger) - Metric tire sizing is based on U.S. pact spare tires have the letter “T” or “S” molded into design standards. P-Metric tires have the letter “P” the sidewall preceding the size designation. Example: molded into the sidewall preceding the size designaT145/80D18 103M. tion. Example: P215/65R15 95H. • High flotation tire sizing is based on U.S.
STARTING AND OPERATING 259 Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards $....blank....$ = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T or S = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%) – Ratio of section height to section width of tire 10.
260 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions – The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
STARTING AND OPERATING 261 EXAMPLE: Load Identification: $....blank....
262 STARTING AND OPERATING EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S.
STARTING AND OPERATING 263 Tire Terminology And Definitions Term B-Pillar Cold Tire Inflation Pressure Maximum Inflation Pressure Recommended Cold Tire Inflation Pressure Tire Placard Definition The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
264 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
STARTING AND OPERATING 265 Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. 3. Tire size designed for your vehicle. 4. Cold tire inflation pressures for the front, rear, and spare tires. Loading Tire And Loading Information Placard The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle.
266 STARTING AND OPERATING NOTE: Under a maximum loaded vehicle condition, Steps For Determining Correct Load Limit gross axle weight ratings (GAWRs) for the front and rear 1. Locate the statement “The combined weight of occuaxles must not be exceeded. For further information on pants and cargo should never exceed XXX lbs or GAWRs, vehicle loading, and trailer towing, refer to XXX kg” on your vehicle’s placard. “Vehicle Loading” in this section. 2.
STARTING AND OPERATING 267 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
268 STARTING AND OPERATING
STARTING AND OPERATING 269 WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
270 STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Economy Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement.
STARTING AND OPERATING 271 • Inspect tires for signs of tire wear or visible damage. CAUTION! Check tire pressures more often if subject to a wide range of outdoor temperatures, as tire pressures vary with temperature changes. After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem.
272 STARTING AND OPERATING Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds and WARNING! within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle important. Increased tire pressure and reduced vehicle poorly.
STARTING AND OPERATING 273 Consult an authorized tire dealer for tire repairs and Summer Or Three Season Tires — If Equipped additional information. Summer tires provide traction in both wet and dry Damaged Run Flat tires, or Run Flat tires that have conditions, and are not intended to be driven in snow or experienced a loss of pressure should be replaced imme- on ice.
274 STARTING AND OPERATING If you need snow tires, select tires equivalent in size and type to the original equipment tires. Use snow tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle. Run Flat Tires — If Equipped Run Flat tires allow you the capability to drive 50 miles (80 km) at 50 mph (80 km/h) after a rapid loss of inflation pressure. This rapid loss of inflation is referred to as the Run Flat mode.
STARTING AND OPERATING 275 rotation for your vehicle. If your vehicle has this option, refer to an authorized tire dealer for the recommended NOTE: For vehicles equipped with TIREFIT instead of a tire rotation pattern. spare tire, please refer to “TIREFIT KIT” in “What To Do Compact Spare Tire — If Equipped In Emergencies” for further information.
276 STARTING AND OPERATING Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare tire. Do not install more than one compact spare tire and wheel on the vehicle at any given time. WARNING! Compact spares are for temporary emergency use only. With these spares, do not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life.
STARTING AND OPERATING 277 WARNING! Limited-use spares are for emergency use only. Installation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel. Keep inflated to the cold tire inflation pressures listed on your Tire and Loading Information Placard located on the driver’s side B-Pillar or the rear edge of the driver’s side door.
278 STARTING AND OPERATING tread wear indicators, the tire should be replaced. Refer to “Replacement Tires” in this section for further information. Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • Tire pressure • Distance driven • Performance tires, tires with a speed rating of V or higher, and summer tires typically have a reduced tread life. Rotation of these tires per the vehicle maintenance schedule is highly recommended.
STARTING AND OPERATING 279 WARNING! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death. Information placard or the Vehicle Certification Label for the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original equipment tire sidewall.
280 STARTING AND OPERATING WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death.
STARTING AND OPERATING 281 TIRE CHAINS (TRACTION DEVICES) Use of traction devices require sufficient tire-to-body clearance. Follow these recommendations to guard against damage: • Traction device must be of proper size for the tire, as recommended by the traction device manufacturer. • Install on Front Tires. • Due to limited clearance, a 185/55R15 tire with a Security Chain Company (SCC) Super Z6 low profile traction device or equivalent is recommended.
282 STARTING AND OPERATING CAUTION! (Continued) • Observe the traction device manufacturer’s instructions on the method of installation, operating speed, and conditions for use. Always use the suggested operating speed of the device manufacturer’s if it is less than 30 mph (48 km/h). • Do not use traction devices on a compact spare tire. TIRE ROTATION RECOMMENDATIONS These effects can be reduced by timely rotation of tires.
STARTING AND OPERATING 283 The tire pressure will vary with temperature by about 1 psi (7 kPa) for every 12° F (6.5° C). This means that when the outside temperature decreases, the tire pressure will decrease. Tire pressure should always be set based on cold inflation tire pressure. This is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after a three hour period.
284 STARTING AND OPERATING The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low pressure warning limit for any reason, including low temperature effects, or natural pressure loss through the tire. The TPMS will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above the recommended cold tire pressure on the placard.
STARTING AND OPERATING 285 CAUTION! CAUTION! (Continued) • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warnings have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
286 STARTING AND OPERATING Under-inflation also reduces fuel efficiency and tire The TPMS uses wireless technology with wheel rim tread life, and may affect the vehicle’s handling and mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve stopping ability. stem, transmit tire pressure readings to the Receiver • The TPMS is not a substitute for proper tire mainteModule.
STARTING AND OPERATING 287 xxx.x psi” text message will display when one or more of the four active road tire pressures are low. Should this occur, you should stop as soon as possible, check the inflation pressure of each tire on your vehicle, and inflate each tire to the vehicle’s recommended cold placard pressure value. The system will automatically update and the Tire Pressure Monitoring Light will extinguish once the updated tire pressures have been received.
288 STARTING AND OPERATING 2. If you install the compact spare tire in place of a road tire that has a pressure below the low-pressure warning limit, upon the next ignition key cycle, a chime will sound and the Tire Pressure Monitoring Telltale Light will still turn ON due to the low tire. 3. However, after driving the vehicle for up to 20 minutes above 15 mph (24 km/h), the Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds and then remain on solid.
STARTING AND OPERATING 289 The TPMS consists of the following components: • Receiver module • Four Tire Pressure Monitoring Sensors • Various Tire Pressure Monitoring System messages, which display in the Electronic Vehicle Information Center (EVIC) 5 • Tire Pressure Monitoring Telltale Light Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will illuminate in the instrument cluster and a chime will sound when tire pressure is low in one or more of the four ac
290 STARTING AND OPERATING to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this information. TPMS Warning When a system fault is detected, the “Tire Pressure Monitoring Telltale Light” will flash on and off for 75 seconds and then remain on solid.
STARTING AND OPERATING 291 A system fault can occur due to any of the following: shown. This indicates that the pressure values are still being received from the TPM sensors but they may not be 1. Signal interference due to electronic devices or driving located in the correct vehicle position. The system still next to facilities emitting the same radio frequencies as needs to be serviced as long as the #Service Tire Pressure the TPM sensors. Monitoring System# message is displayed. 2.
292 STARTING AND OPERATING Telltale Light” will flash on and off for 75 seconds and driven for up to 20 minutes above 15 mph (24 km/h) in then remain on solid. In addition, the EVIC will order for the TPMS to receive this information. display a “Service TPM System” message and then General Information display dashes (- -) in place of the pressure value. This device complies with Part 15 of the FCC rules and • For each subsequent ignition switch cycle, a chime will RSS 210 of Industry Canada.
STARTING AND OPERATING 293 FUEL REQUIREMENTS — 1.4L Engine FUEL REQUIREMENTS — 1.4L Turbo This engine is designed to meet all emisThis engine is designed to meet all emission regulations and provide satisfactory sion regulations and provide satisfactory fuel economy and performance when usfuel economy and performance when using high-quality unleaded #regular# gasoing high-quality unleaded “regular” gasoline with a minimum octane rating of 87. line with a minimum octane rating of 87.
294 STARTING AND OPERATING Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline referred to as “Reformulated Gasoline.” Reformulated gasoline contain oxygenates and are specifically blended to reduce vehicle emissions and improve air quality. Fuels blended with these oxygenates may be used in your vehicle. CAUTION! Do not use gasoline containing Methanol or E-85 Ethanol.
STARTING AND OPERATING 295 If a Non-FFV vehicle is inadvertently fueled with E-85 More extensive repairs will be required for prolonged fuel, the engine will have some or all of these symptoms: exposure to E-85 fuel. • Operate in a lean mode. MMT In Gasoline Methylcyclopentadienyl Manganese Tricarbonyl (MMT) is a manganese-containing metallic additive that is • Poor engine performance. blended into some gasoline to increase octane.
296 STARTING AND OPERATING Materials Added To Fuel All gasoline sold in the United States is required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefore, you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law.
STARTING AND OPERATING 297 NOTE: Intentional tampering with the emissions control system can result in civil penalties being assessed against you. Carbon Monoxide Warnings WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: (Continued) WARNING! (Continued) • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill.
298 STARTING AND OPERATING ADDING FUEL CAUTION! Fuel Filler Cap (Gas Cap) The gas cap is located on the passenger side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is the correct one for this vehicle. • Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impurities into the fuel system.
STARTING AND OPERATING 299 WARNING! (Continued) Loose Fuel Filler Cap Message After fuel has been added, the vehicle diagnostic system can determine if the fuel filler cap is possibly loose, improperly installed, or damaged. If the system detects a malfunction, the “gASCAP” message will display in the odometer display. Tighten the gas cap until a #clicking# sound is heard. This is an indication that the gas cap is properly tightened. Press the odometer reset button to turn the message off.
300 STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.
STARTING AND OPERATING 301 This vehicle may be towed on a flatbed or vehicle trailer provided all four wheels are OFF the ground. CAUTION! This vehicle may also be towed using a tow dolly (with the front wheels OFF the ground). DO NOT flat tow any vehicle equipped with an automatic transmission. Damage to the drivetrain will result. If these vehicles require towing, make sure all drive wheels are OFF the ground.
WHAT TO DO IN EMERGENCIES CONTENTS ! HAZARD WARNING FLASHERS . . . . . . . . . . .305 ! JACKING AND TIRE CHANGING — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . ! IF YOUR ENGINE OVERHEATS . . . . . . . . . . . .305 ▫ Jack Location . . . . . . . . . . . . . . . . . . ! TIREFIT KIT — IF EQUIPPED . . . . . . . . . . . . .307 ▫ Spare Tire Removal . . . . . . . . . . . . . . ▫ TIREFIT Storage . . . . . . . . . . . . . . . . . . . . . .307 ▫ Preparations For Jacking . . . . . . . . . .
304 WHAT TO DO IN EMERGENCIES ▫ Jump-Starting Procedure . . . . . . . . . . . . . . . .335 ▫ Automatic Transmission . . . . . . . . . . . . . . . . .341 ! FREEING A STUCK VEHICLE . . . . . . . . . . . . .336 ▫ Manual Transmission . . . . . . . . . . . . . . . . . . .342 ! SHIFT LEVER OVERRIDE . . . . . . . . . . . . . . . .338 ! ENHANCED ACCIDENT RESPONSE SYSTEM . .342 ! TOWING A DISABLED VEHICLE . . . . . . . . . . .
WHAT TO DO IN EMERGENCIES 305 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel below the radio. potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning flashers. When the switch is activated, all direc- • On the highways — slow down.
306 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! Driving with a hot cooling system could damage your vehicle. If the pointer rises to the H (red) mark, the instrument cluster will sound a chime. When safe, pull over and stop the vehicle with the engine at idle. Turn off the air conditioning and wait until the pointer drops back into the normal range. If the pointer remains on the H (red) mark for more than a minute, turn the engine off immediately and call for service.
WHAT TO DO IN EMERGENCIES 307 TIREFIT KIT — IF EQUIPPED Small punctures up to ¼” (6 mm) in the tire tread can be sealed with TIREFIT. Foreign objects (e.g., screws or nails) should not be removed from the tire. TIREFIT can be used in outside temperatures down to approximately -4°F (-20°C). This kit will provide a temporary tire seal, allowing you to drive your vehicle up to 100 miles (160 km) with a maximum speed of 55 mph (90 km/h).
308 WHAT TO DO IN EMERGENCIES TIREFIT Kit Components And Operation Using The Mode Select Knob And Hoses Your TIREFIT kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob (5) and turn to this position for air pump operation only. Use the Black Air Pump Hose (7) when selecting this mode.
WHAT TO DO IN EMERGENCIES 309 Using The Power Button Push and release the Power Button (4) once to turn On the TIREFIT kit. Push and release the Power Button (4) again to turn Off the TIREFIT kit. Using The Deflation Button Press the Deflation Button (2) to reduce the air pressure in the tire if it becomes over-inflated.
310 WHAT TO DO IN EMERGENCIES the vehicle or tire and wheel components. Once the sealant dries, it can easily be peeled off and properly discarded. • For optimum performance, make sure the valve stem on the wheel is free of debris before connecting the TIREFIT kit. • You can use the TIREFIT air pump to inflate bicycle tires. The kit also comes with two needles, located in the Accessory Storage Compartment (on the bottom of the air pump) for inflating sport balls, rafts, or similar inflatable items.
WHAT TO DO IN EMERGENCIES 311 WARNING! (Continued) WARNING! (Continued) • Keep TIREFIT away from open flames or heat source. • A loose TIREFIT kit thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the TIREFIT kit in the place provided. Failure to follow these warnings can result in injuries that are serious or fatal to you, your passengers, and others around you.
312 WHAT TO DO IN EMERGENCIES kit when injecting the sealant into the deflated tire and 4. Remove the cap from the valve stem and then screw the fitting at the end of the Sealant Hose (6) onto the running the air pump. Move the vehicle as necessary valve stem. to place the valve stem in this position before proceeding. 5. Uncoil the Power Plug (8) and insert the plug into the vehicle’s 12 Volt power outlet. 3.
WHAT TO DO IN EMERGENCIES 313 NOTE: Sealant may leak out through the puncture in the NOTE: If the Mode Select Knob (5) is on Air Mode and tire. the pump is operating, air will dispense from the Air If the sealant (white fluid) does not flow within 0 – 10 Pump Hose (7) only, not the Sealant Hose (6). seconds through the Sealant Hose (6): If the sealant (white fluid) does flow through the 1. Press the Power Button (4) to turn Off the TIREFIT kit.
314 WHAT TO DO IN EMERGENCIES latch pillar (recommended pressure). Check the tire 3. Immediately disconnect the Sealant Hose (6) from the pressure by looking at the Pressure Gauge (3). valve stem, reinstall the cap on the fitting at the end of the hose, and place the TIREFIT kit in the vehicle If the tire does not inflate to at least 26 psi (1.8 Bar) storage location. Quickly proceed to (D) “Drive Vepressure within 15 minutes: hicle.” • The tire is too badly damaged.
WHAT TO DO IN EMERGENCIES 315 (D) Drive Vehicle: (E) After Driving: Immediately after injecting sealant and inflating the tire, Pull over to a safe location. Refer to “Whenever You Stop drive the vehicle 5 miles (8 km) or 10 minutes to ensure to Use TIREFIT” before continuing. distribution of the TIREFIT Sealant within the tire. Do not 1. Push in the Mode Select Knob (5) and turn to the Air exceed 55 mph (90 km/h). Mode position. WARNING! TIREFIT is not a permanent flat tire repair.
316 WHAT TO DO IN EMERGENCIES 5. Replace the Sealant Bottle (1) and Sealant Hose (6) assembly at your authorized dealer as soon as pos1. Press the Power Button (4) to turn on TIREFIT and sible. Refer to (F) “Sealant Bottle and Hose Replaceinflate the tire to the pressure indicated on the tire and ment”. loading information label on the driver-side door opening.
WHAT TO DO IN EMERGENCIES 317 5. Position the new Sealant Bottle (1) in the housing so Torque Specifications that the Sealant Hose (6) aligns with the hose slot in Lug Nut/Bolt Torque **Lug Nut/ Lug Nut/ the front of the housing. Press the bottle into the Bolt Size Bolt Socket housing. An audible click will be heard indicating the Size bottle is locked into place. 66 Ft-Lbs (90 N·m) M12 x 1.25 17 mm 6.
318 WHAT TO DO IN EMERGENCIES Wheel Mounting Surface Torque Patterns Tighten the lug nuts/bolts in a star pattern until each After 25 miles (40 km) check the lug nut/bolt torque to be nut/bolt has been tightened twice. sure that all the lug nuts/bolts are properly seated against the wheel.
WHAT TO DO IN EMERGENCIES 319 WARNING! WARNING! (Continued) To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack.
320 WHAT TO DO IN EMERGENCIES Jack Location Spare Tire Removal The jack and jack wrench tool are stowed in a bag under The spare tire is stowed to the underbody below the the front driver’s seat. cargo area. 1. Remove the plug located in the rear cargo area.
WHAT TO DO IN EMERGENCIES 321 2. Fit the wrench tool over the drive nut. Use the wrench to rotate the nut counterclockwise until the spare is on the ground with enough slack in the cable to allow you to pull the tire out from under the vehicle.
322 WHAT TO DO IN EMERGENCIES CAUTION! The winch mechanism is designed for use with the jack wrench tool only. Use of an air wrench or other power tools is not recommended and they can damage the winch. 3. Pull the spare tire out from under the vehicle.
WHAT TO DO IN EMERGENCIES 323 4. Tilt the retainer at the end of the cable and pull it Preparations For Jacking through the center of the wheel. 1. Park the vehicle on a firm level surface, avoiding ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2. Turn on the Hazard Warning flashers. 3. Set the parking brake. Retainer 4.
324 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle while the vehicle is being jacked.
WHAT TO DO IN EMERGENCIES 325 WARNING! (Continued) • Only use the jack in the positions indicated and for lifting this vehicle during a tire change. • If working on or near a roadway, be extremely careful of motor traffic. • To assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground.
326 WHAT TO DO IN EMERGENCIES 3. Loosen, but do not remove, the wheel bolts by turning them to the left one turn while the wheel is still on the ground. NOTE: There are front and rear jacking locations on each side of the body (as indicated by the triangular lift point symbol on the sill molding).
WHAT TO DO IN EMERGENCIES 327 4. Turn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the wheel to be changed. 6 Rear Jacking Location Do not raise the vehicle until you are sure the jack is securely engaged.
328 WHAT TO DO IN EMERGENCIES WARNING! WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. To avoid the risk of forcing the vehicle off the jack, do not fully tighten the wheel bolts until the vehicle has been lowered. Failure to follow this warning may result in personal injury. 5. Using the swivel wrench, raise the vehicle by turning the jack screw to the right.
WHAT TO DO IN EMERGENCIES 329 7. Install the spare wheel and wheel bolts with the cone shaped end of the bolts toward the wheel. Lightly tighten the bolts. To avoid the risk of forcing the vehicle off the jack, do not tighten the bolts fully until the vehicle has been lowered. 8. Lower the vehicle by turning the jack screw to the left. bag to the floor with the straps attached to the floor of the vehicle.
330 WHAT TO DO IN EMERGENCIES 12. Check the spare tire pressure as soon as possible. Correct the tire pressure as required. Road Tire Installation Vehicles Equipped With Wheel Covers 1. Mount the road tire on the axle. 2. Align the valve notch in the wheel cover with the valve stem on the wheel. Install the cover by hand. Do not use a hammer or excessive force to install the cover.
WHAT TO DO IN EMERGENCIES 331 3. Install the four wheel bolts with the cone shaped end 6. After 25 miles (40 km) check the wheel bolt torque of the nut toward the wheel. Lightly tighten the wheel with a torque wrench to ensure that all wheel bolts are bolts. properly seated against the wheel. WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel bolts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. 4.
332 WHAT TO DO IN EMERGENCIES 3. Lower the vehicle to the ground by turning the jack handle counterclockwise. CAUTION! 4. Finish tightening the wheel bolts. Push down on the wrench while at the end of the handle for increased leverage. Refer to “Torque Specifications” in this section for correct wheel bolt torque. The winch mechanism is designed for use with the jack wrench extension tool only. Use of air wrench or power tool may damage the winch. JUMP-STARTING PROCEDURE 5.
WHAT TO DO IN EMERGENCIES 333 WARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury. CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur.
334 WHAT TO DO IN EMERGENCIES WARNING! 2. Turn off the heater, radio, and all unnecessary electrical accessories. • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact. You could be seriously injured.
WHAT TO DO IN EMERGENCIES 335 Jump-Starting Procedure WARNING! Failure to follow this jump-starting procedure could result in personal injury or property damage due to battery explosion. CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. Connecting The Jumper Cables 1. Connect the positive (+) end of the jumper cable to the positive (+) post of the discharged vehicle. 2.
336 WHAT TO DO IN EMERGENCIES 5. Start the engine in the vehicle that has the booster If frequent jump-starting is required to start your vehicle, battery, let the engine idle a few minutes, and then you should have the battery and charging system instart the engine in the vehicle with the discharged spected at your authorized dealer. battery. 6. Once the engine is started, remove the jumper cables in the reverse sequence: Disconnecting The Jumper Cables 1.
WHAT TO DO IN EMERGENCIES 337 and REVERSE (with automatic transmission) or 2nd gear and REVERSE (with manual transmission), while gently pressing the accelerator. Use the least amount of accelerator pedal pressure that will maintain the rocking motion, without spinning the wheels, or racing the engine. NOTE: Press the #ESC Off# switch, to place the Electronic Stability Control (ESC) system in #Partial Off# mode, before rocking the vehicle.
338 WHAT TO DO IN EMERGENCIES WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping when you are stuck and do not let anyone near a spinning wheel, no matter what the speed.
WHAT TO DO IN EMERGENCIES 339 4. Press and maintain firm pressure on the brake pedal. 5. Insert a small screwdriver or similar tool into the access hole, and push and hold the override release lever in. 6. Move the shift lever to the NEUTRAL position. 7. The vehicle may then be started in NEUTRAL. 8. Reinstall the shift lever override access cover.
340 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial wrecker service.
WHAT TO DO IN EMERGENCIES 341 Proper towing or lifting equipment is required to prevent CAUTION! (Continued) damage to your vehicle. Use only tow bars and other • Towing this vehicle in violation of the above reequipment designed for this purpose, following equipquirements can cause severe transmission damage. ment manufacturer’s instructions. Use of safety chains is Damage from improper towing is not covered unmandatory. Attach a tow bar or other towing device to der the New Vehicle Limited Warranty.
342 WHAT TO DO IN EMERGENCIES CAUTION! CAUTION! • DO NOT flat tow any vehicle equipped with an automatic transmission. Damage to the drivetrain will result. • Towing this vehicle in violation of the above requirements can cause severe transmission damage. Damage from improper towing is not covered under the New Vehicle Limited Warranty. Towing this vehicle in violation of the above requirements can cause severe engine and/or transmission damage.
WHAT TO DO IN EMERGENCIES 343 • Flash hazard lights as long as the battery has power or System Reset Procedure until the ignition key is turned off. After an impact causing airbag deployment, the left and • Turn on the interior lights, which remain on as long as right turn signal lights, located in the instrument panel the battery has power or until the ignition key is cluster, will both be blinking, until the ignition is turned removed. off. • Unlock the doors automatically.
344 WHAT TO DO IN EMERGENCIES Customer Action 1. Turn ignition OFF. (Turn Signal Switch Must be placed in Neutral State). 2. Turn ignition ON. 3. Turn Right Turn Signal Switch ON. 4. Turn Left Turn Signal Switch ON. 5. Turn Right Turn Signal Switch ON. Customer Will See Left Turn Light is OFF. Right Turn Light BLINKS. Right Turn Light is ON SOLID. Left Turn Light BLINKS. Left Turn Light is ON SOLID. Right Turn Light BLINKS. Right Turn Light is ON SOLID. Left Turn Light BLINKS. 6.
MAINTAINING YOUR VEHICLE CONTENTS ! ENGINE COMPARTMENT — 1.4L . . . . . . . . . .347 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . .356 ! ENGINE COMPARTMENT — 1.4L TURBO . . . .348 ▫ Maintenance-Free Battery . . . . . . . . . . . . . . .357 ! ONBOARD DIAGNOSTIC SYSTEM — OBD II . .349 ▫ Air Conditioner Maintenance . . . . . . . . . . . . .359 ! EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . .349 ▫ Body Lubrication . . . . . . . . . . . . . .
346 MAINTAINING YOUR VEHICLE ▫ Automatic Transmission — If Equipped . . . . .378 ▫ Appearance Care And Protection From Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . .380 ▫ Front Turn Signal, Parking And Daytime Running Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . .396 ▫ Front Fog Lamps . . . . . . . . . . . . . . . . . . . . . .397 ▫ Convertible Top Care – If Equipped . . . . . . . .386 ▫ Front/Rear Side Marker Lamps. . . . . . . . . . . .397 ! FUSES . . . . . . . . . .
MAINTAINING YOUR VEHICLE 347 ENGINE COMPARTMENT — 1.
348 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 1.
MAINTAINING YOUR VEHICLE 349 ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
350 MAINTAINING YOUR VEHICLE NOTE: If you crank or start the engine, you will have to For states that require an Inspection and Maintestart this test over. nance (I/M), this check verifies the “Malfunction Indicator Light (MIL)” is functioning and is not 2. As soon as you cycle the ignition switch to the ON on when the engine is running, and that the OBD II position, you will see the MIL symbol come on as part system is ready for testing. of a normal bulb check. Normally, the OBD II system will be ready.
MAINTAINING YOUR VEHICLE 351 If your OBD II system is not ready, you should see your authorized dealer or repair facility. If your vehicle was recently serviced or had a battery failure or replacement, you may need to do nothing more than drive your vehicle as you normally would in order for your OBD II system to update. A recheck with the above test routine may then indicate that the system is now ready.
352 MAINTAINING YOUR VEHICLE WARNING! CAUTION! You can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly maintain your vehicle or perform repairs and service when necessary could result in more costly repairs, damage to other components or negatively impact vehicle performance.
MAINTAINING YOUR VEHICLE 353 Engine Oil Checking Oil Level To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about five minutes after a fully warmed engine is shut off. Do not check oil level before starting the engine after it has sat overnight. Checking engine oil level when the engine is cold will give you an incorrect reading.
354 MAINTAINING YOUR VEHICLE Engine Oil Selection — 1.4L Engine American Petroleum Institute (API) Engine Oil For best performance and maximum protection under all Identification Symbol types of operating conditions, the manufacturer only This symbol means that the oil has recommends engine oils that are API Certified and meet been certified by the American the requirements of Chrysler Material Standard MS-6395. Petroleum Institute (API). The Engine Oil Selection — 1.
MAINTAINING YOUR VEHICLE 355 Engine Oil Viscosity — 1.4L Engine (SAE Grade) Engine Oil Viscosity — 1.4L Turbo Engine (SAE SAE 5W-30 engine oil recommended for all operating Grade) temperatures. This engine oil improves low temperature SAE 5W-40 full synthetic engine oil is recommended for all operating temperatures. This engine oil improves low starting and vehicle fuel economy. temperature starting and vehicle fuel economy.
356 MAINTAINING YOUR VEHICLE station or governmental agency for advice on how and where used oil and oil filters can be safely discarded in You may use synthetic engine oils provided the recomyour area. mended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes Engine Oil Filter are followed. The engine oil filter should be replaced with a new filter Materials Added To Engine Oil at every engine oil change.
MAINTAINING YOUR VEHICLE 357 WARNING! The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc.) removed. Failure to do so can result in serious personal injury.
358 MAINTAINING YOUR VEHICLE WARNING! (Continued) CAUTION! • Battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 Volts. Do not allow cable clamps to touch each other. • Battery posts, terminals, and related accessories contain lead and lead compounds. Wash hands after handling.
MAINTAINING YOUR VEHICLE 359 Air Conditioner Maintenance WARNING! (Continued) For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. • The air conditioning system contains refrigerant under high pressure.
360 MAINTAINING YOUR VEHICLE Protection Agency and is an ozone-saving product. How- NOTE: Use only manufacturer approved A/C system ever, the manufacturer recommends that air conditioning PAG compressor oil, and refrigerants. service be performed by authorized dealer or other A/C Air Filter service facilities using recovery and recycling equipment. NOTE: Use only manufacturer approved A/C system PAG compressor oil, and refrigerants.
MAINTAINING YOUR VEHICLE 361 7 Torx® Screw Location Console Closeout Panel 2. Pull the console closeout cover rearward to disengage 3. Remove the two 5.5 mm screws (1 and 2) that secure the front retaining tab and remove the cover. the particulate air filter cover to the HVAC housing.
362 MAINTAINING YOUR VEHICLE Air Filter Cover Screw Locations A/C Air Filter 4. Remove the A/C air filter by pulling it straight out of 5. Install the A/C air filter with the air filter position the housing. Take note of the air filter position indicaindicators pointing in the same direction as removal. tors.
MAINTAINING YOUR VEHICLE 363 CAUTION! The A/C air filter is identified with an arrow to indicate airflow direction through the filter. Failure to properly install the filter will result in the need to replace it more often. should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure proper function.
364 MAINTAINING YOUR VEHICLE Operation of the wipers on dry glass for long periods Rear Wiper Blade Removal/Installation may cause deterioration of the wiper blades. Always use 1. Lift the pivot cap on the rear wiper arm upward, this washer fluid when using the wipers to remove salt or dirt will allow the rear wiper blade to be raised off of the from a dry windshield or rear window. liftgate glass. Avoid using the wiper blades to remove frost or ice from the windshield or rear window.
MAINTAINING YOUR VEHICLE 365 NOTE: The rear wiper arm cannot be raised fully upward unless the pivot cap is raised first. 2. Lift the rear wiper arm upward to raise the wiper blade off of the liftgate glass. 3. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin from the wiper blade holder. 7 1 2 3 4 — — — — Wiper Blade Blade Pivot Pin Wiper Arm Wiper Blade Holder 4.
366 MAINTAINING YOUR VEHICLE 5. Lower the wiper blade and snap the pivot cap into Exhaust System place. The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust Adding Washer Fluid system. The windshield washer fluid reservoir is located in the engine compartment, and the fluid level should be If you notice a change in the sound of the exhaust system; checked at regular intervals.
MAINTAINING YOUR VEHICLE 367 WARNING! CAUTION! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, refer to “Safety Tips/Exhaust Gas” in “Things To Know Before Starting Your Vehicle” for further information. • A hot exhaust system can start a fire if you park over materials that can burn.
368 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter damverter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage. motion.
MAINTAINING YOUR VEHICLE 369 Coolant Checks Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator.
370 MAINTAINING YOUR VEHICLE Refer to the “Maintenance Schedule” for the proper maintenance intervals. CAUTION! NOTE: Some vehicles require special tools to add coolant properly. Failure to fill these systems properly could lead to severe internal engine damage. If any coolant is needed to be added to the system please contact your local authorized dealer.
MAINTAINING YOUR VEHICLE 371 CAUTION! (Continued) • Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with the radiator engine coolant and may plug the radiator. • This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended.
372 MAINTAINING YOUR VEHICLE (antifreeze) solution. The use of lower quality water • Mixing engine coolant (antifreeze) types is not recomwill reduce the amount of corrosion protection in the mended and can result in cooling system damage. If engine cooling system.
MAINTAINING YOUR VEHICLE 373 WARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To prevent scalding or injury, do not remove the pressure cap while the system is hot or under pressure. • Do not use a pressure cap other than the one specified for your vehicle.
374 MAINTAINING YOUR VEHICLE When additional engine coolant (antifreeze) is needed to • Check the coolant freeze point in the radiator and in the coolant expansion bottle. If engine coolant (antimaintain the proper level, it should be added to the freeze) needs to be added, the contents of the coolant coolant bottle. Do not overfill. expansion bottle must also be protected against freezPoints To Remember ing.
MAINTAINING YOUR VEHICLE 375 • Do not change the thermostat for Summer or Winter operation. If replacement is ever necessary, install ONLY the correct type thermostat. Other designs may result in unsatisfactory engine coolant (antifreeze) performance, poor gas mileage, and increased emissions. WARNING! (Continued) high brake temperatures, excessive lining wear, and possible brake damage. Riding the brakes may also reduce braking capacity in an emergency.
376 MAINTAINING YOUR VEHICLE NOTE: If your vehicle is equipped with a manual transmission, the brake fluid reservoir supplies fluid to both the brake system and the clutch release system. The two systems are separated in the reservoir, and a leak in one system will not affect the other system. The manual transmission clutch release system should not require fluid replacement during the life of the vehicle.
MAINTAINING YOUR VEHICLE 377 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point. This may cause it to boil unexpectedly during hard or prolonged braking, resulting in sudden brake failure. This could result in a collision.
378 MAINTAINING YOUR VEHICLE Manual Transmission — If Equipped Lubricant Selection NOTE: If contaminated with water, the fluid should be changed immediately. Automatic Transmission — If Equipped Use only the manufacturers recommended transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in Selection Of Lubricant “Maintaining Your Vehicle” for further information. It is important to use the proper transmission fluid to Fluid Level Check ensure optimum transmission performance and life.
MAINTAINING YOUR VEHICLE 379 CAUTION! CAUTION! Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for fluid specifications. Do not use chemical flushes in your transmission as the chemicals can damage your transmission components. Such damage is not covered by the New Vehicle Limited Warranty.
380 MAINTAINING YOUR VEHICLE CAUTION! If a transmission fluid leak occurs, visit your authorized dealer immediately. Severe transmission damage may occur. Your authorized dealer has the proper tools to adjust the fluid level accurately. Fluid And Filter Changes Under normal operating conditions, the fluid installed at the factory will provide satisfactory lubrication for the life of the vehicle. Routine fluid and filter changes are not required.
MAINTAINING YOUR VEHICLE 381 • Insects, tree sap and tar. • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants. Washing CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder that will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. • Wash your vehicle regularly.
382 MAINTAINING YOUR VEHICLE • If you detect any stone chips or scratches in the paint, Wheel And Wheel Trim Care touch them up immediately. The cost of such repairs is • All wheels and wheel trim, especially aluminum and considered the responsibility of the owner. chrome plated wheels, should be cleaned regularly • If your vehicle is damaged due to a collision or similar with a mild soap and water to prevent corrosion.
MAINTAINING YOUR VEHICLE 383 CAUTION! Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Do not use oven cleaner. These products may damage the wheel’s protective finish. Avoid automatic car washes that use acidic solutions or harsh brushes that may damage the wheel’s protective finish. Only MOPAR® Wheel Cleaner or equivalent is recommended.
384 MAINTAINING YOUR VEHICLE Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and MOPAR® Total Clean. Care should be taken to avoid soaking your leather upholstery with any liquid.
MAINTAINING YOUR VEHICLE 385 Glass Surfaces All glass surfaces should be cleaned on a regular basis with MOPAR® Glass Cleaner, or any commercial household-type glass cleaner. Never use an abrasive type cleaner. Use caution when cleaning the inside rear window equipped with electric defrosters or the right rear quarter window equipped with the radio antenna. Do not use scrapers or other sharp instrument that may scratch the elements.
386 MAINTAINING YOUR VEHICLE Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the belts need cleaning, use a mild soap solution or lukewarm water. Do not remove the belts from the car to wash them. Dry with a soft cloth. Replace the belts if they appear frayed or worn or if the buckles do not work properly.
MAINTAINING YOUR VEHICLE 387 CAUTION! Failure to follow these cautions may cause interior water damage, stains or mildew on the top material: • Avoid high-pressure car washes, as they can damage the top material. Also, increased water pressure may force past the weather strips. • Remove any standing water from the top and dry the surface before opening it. Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicles interior.
388 MAINTAINING YOUR VEHICLE before washing the top. The top should be washed with a soft, natural bristle scrub brush, and a mild soap solution such as liquid dishwashing soap. Do not use detergent. CAUTION! Never use an abrasive type cleaner or bleaches. Cleaners should not contain silicones, organic solvents, petroleum distillates, or plasticizers. Always wait until the top is thoroughly dry before lowering it into the storage area.
MAINTAINING YOUR VEHICLE 389 WARNING! (Continued) • Before replacing a fuse, make sure that the ignition is off and that all the other services are switched off and/or disengaged. • If the replaced fuse blows again, contact an authorized dealer. • If a general protection fuse for safety systems (air bag system, braking system), power unit systems (engine system, gearbox system) or steering system blows, contact an authorized dealer.
390 MAINTAINING YOUR VEHICLE Cavity 1 2 Vehicle Fuse Number F12 F32 Mini Fuse 7.5 Amp Brown 5 Amp Tan 3 4 5 F53 F38 F36 5 Amp Tan 20 Amp Yellow 10 Amp Red 6 7 8 9 10 F43 F48 F13 F50 F51 20 Amp Yellow 20 Amp Yellow 7.5 Amp Brown 7.
MAINTAINING YOUR VEHICLE 391 Cavity 12 Vehicle Fuse Number F49 Mini Fuse 5 Amp Tan 13 14 F31 F47 5 Amp Tan 20 Amp Yellow Description Exterior Mirror, GPS, Electric Mirror, Parking Sensor Ignition, Climate Control Driver Power Window Underhood Fuses The Front Distribution Unit is located on the right side of the engine compartment, next to the battery. To access the fuses, press the release tabs and remove the cover.
392 MAINTAINING YOUR VEHICLE The ID number of the electrical component corresponding to each fuse can be found on the back of the cover.
MAINTAINING YOUR VEHICLE 393 Cavity F11 F14 F15 F16 F17 F17 F18 F18 F19 F20 F21 F22 F23 F24 F30 Maxi Fuse Mini Fuse 10 Amp Red 5 Amp Tan 15 Amp Blue 7.5 Amp Brown 25 Amp White 15 Amp Blue 15 Amp Blue 5 Amp Tan 7.5 Amp Brown 15 Amp Blue 15 Amp Blue 20 Amp Yellow 20 Amp Yellow 7.
394 MAINTAINING YOUR VEHICLE Cavity F82 F83 F84 F85 F87 F90 Maxi Fuse 30 Amp Green 20 Amp Yellow Mini Fuse 10 Amp Red 30 Amp Green (ATO) 5 Amp Tan 5 Amp Tan Description Sunroof/Convertible Top Cooling Pump – If Equipped Transmission Rear Defroster Rear Defroster Heated Mirrors – If Equipped • Anytime you store your vehicle, or keep it out of service (e.g.
MAINTAINING YOUR VEHICLE 395 REPLACEMENT BULBS Interior Bulbs Overhead Lamp Courtesy Lamp Bulb Number C5W W5W Exterior Bulbs Front Low and High Beam Headlamp Front Parking/Daytime Running Lamps Front Fog Lamps Front Side Marker Lamps Front Turn Signal Lamps Bulb Number HIR2 W21/5W H11 W3W WY21W Side Direction Lamps Rear Turn Signal Lamps Rear Side Marker Lamps Rear Tail and Stop Lamps Rear Backup Lamps Center High Mounted Stop Lamp License Plate Lamps Bulb Number WY5W PY21W W3W P21/5W W16W W5W LED (Se
396 MAINTAINING YOUR VEHICLE BULB REPLACEMENT Front Turn Signal, Parking And Daytime Running Lamps NOTE: Lens fogging can occur under certain atmospheric conditions. This will usually clear as atmospheric 1. Turn the steering wheel completely to the left or right. conditions change to allow the condensation to change 2. Open the wheel housing access door. back into a vapor. Turning the lamps on will usually accelerate the clearing process. Headlamps Low Beam and High Beam 1.
MAINTAINING YOUR VEHICLE 397 3. Remove the plastic cap from the back of the lamp housing. 2. Rotate the bulb socket counterclockwise, and remove the bulb and socket assembly from the housing. 4. Rotate bulb/socket counter-clockwise. 3. Pull the bulb from the socket and insert the replacement bulb. 5. Remove the bulb and replace as needed. 6. Install the bulb into socket, and rotate bulb/socket clockwise into lamp locking it in place. 7. Reinstall the plastic cap. Front Fog Lamps 4.
398 MAINTAINING YOUR VEHICLE 5. Remove the backup lamp bulb by pulling straight out. 6. Replace lamps as required and reinstall lamp. Center High Mounted Stop Lamp (CHMSL) 1. Remove the two guard caps and the two fastening screws. 2. Remove the center high mounted stop lamp assembly. 3. Disconnect the electric connector. 4. Press the retaining device and open the bulb holder. Tail Lamp Assembly Screws 5. Remove the snap-fitted bulb to be replaced and replace it. 3.
MAINTAINING YOUR VEHICLE 399 FLUID CAPACITIES Fuel (Approximate) Engine Oil with Filter 1.4L/1.4L Turbo Engine Cooling System 1.4L/1.4L Turbo Engine (MOPAR® Antifreeze/Engine Coolant 10 Year/150,000 Mile Formula) — with Manual Transmission 1.4L/1.4L Turbo Engine (MOPAR® Antifreeze/Engine Coolant 10 Year/150,000 Mile Formula) — with Automatic Transmission U.S. 10.5 Gallons Metric 40 Liters 4 Quarts 3.8 Liters 4.6 Quarts 4.4 Liters 5.8 Quarts 5.
400 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine Coolant - 1.4L/1.4L Turbo Engine Engine Oil - 1.4L Engine Engine Oil - 1.4L Turbo Engine Engine Oil Filter - 1.4L/1.4L Turbo Engine Fluid, Lubricant, or Genuine Part We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106.
MAINTAINING YOUR VEHICLE 401 Component Spark Plugs - 1.4L Engine Spark Plugs - 1.4L Turbo Engine Fuel Selection - 1.4L/1.
MAINTENANCE SCHEDULES CONTENTS ! MAINTENANCE SCHEDULE . . . . . . . . . . . . .404 ▫ Maintenance Chart . . . . . . . . . . . . . . . . . . . .
404 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE Your vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate. This means that service is required for your vehicle.
MAINTENANCE SCHEDULES 405 Once A Month Or Before A Long Trip: • Check engine oil level. • Check windshield washer fluid level. • Check the tire inflation pressures and look for unusual wear or damage. • Check the fluid levels of the coolant reservoir and brake master cylinder, and fill as needed. • Check function of all interior and exterior lights. Required Maintenance Intervals. Refer to the maintenance schedules on the following page for the required maintenance intervals.
406 MAINTENANCE SCHEDULES Maintenance Chart Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends and boot seals, and replace if necessary. Inspect the brake linings. Replace as necessary.
Inspect parking brake function. Adjust as necessary. Additional Maintenance Replace engine air filter. Replace cabin air filter. Clean and lube sun roof tracks. Replace spark plugs (1.4L Engine). ** Replace spark plugs (1.4L Turbo Engine).
30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 2 3 4 5 6 7 8 9 10 11 12 13 14 15 48,000 64,000 80,000 96,000 112,000 128,000 144,000 160,000 176,000 192,000 208,000 224,000 240,000 Or Years: Or Kilometers: 20,000 Mileage or time passed (whichever comes first) 32,000 408 MAINTENANCE SCHEDULES Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first.
MAINTENANCE SCHEDULES 409 WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS ! SUGGESTIONS FOR OBTAINING SERVICE FOR ! WARRANTY INFORMATION . . . . . . . . . . . . .415 YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . .412 ! REPORTING SAFETY DEFECTS . . . . . . . . . . . .415 ▫ Prepare For The Appointment. . . . . . . . . . . . .412 ▫ In The 50 United States And Washington, D.C. . .415 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . .412 ▫ In Canada . . . . . . . . . . . . . . . . . . . . . . . . . . .
412 IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment Be Reasonable With Requests If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it is advisable to make these arrangements when you call for an appointment.
IF YOU NEED CONSUMER ASSISTANCE 413 facilities, factory-trained technicians, special tools, and • Authorized dealer name the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized dealer service manager first. Most matters can be re- FIAT CUSTOMER CENTER solved with this process. P.O.
414 IF YOU NEED CONSUMER ASSISTANCE (TTY) in the United States, can communicate with the Hotline at 1-800-521-9922 (Canadian residents, call (800) 465–2001 English / (800) 387–9983 French). manufacturer by dialing 1–800–380–CHRY. The manufacturer will not stand behind any service contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the manufacturer’s service contract.
IF YOU NEED CONSUMER ASSISTANCE 415 WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain, or emit, chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm.
416 IF YOU NEED CONSUMER ASSISTANCE To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153), or go to http://www.safercar.gov; or write to: Administrator, NHTSA, 1200 New Jersey Avenue, SE., West Building, Washington, D.C. 20590. You can also obtain other information about motor vehicle safety from http:// www.safercar.gov. In Canada If you believe that your vehicle has a safety defect, you should contact the Customer Service Department immediately.
IF YOU NEED CONSUMER ASSISTANCE 417 Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations. These practical manuals make it easy for students and technicians to find and fix problems on computer-controlled vehicle systems and features. They show exactly how to find and correct problems the first time, using step-by-step troubleshooting and drivability procedures, proven diagnostic tests and a complete list of all tools and equipment.
418 IF YOU NEED CONSUMER ASSISTANCE All passenger car tires must conform to Federal safety Traction Grades requirements in addition to these grades. The Traction grades, from highest to lowest, are AA, A, B, and C. These grades represent the tire’s ability to stop on Treadwear wet pavement, as measured under controlled conditions The Treadwear grade is a comparative rating, based on on specified government test surfaces of asphalt and the wear rate of the tire when tested under controlled concrete.
IF YOU NEED CONSUMER ASSISTANCE 419 WARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10
422 INDEX Adding Engine Coolant (Antifreeze) . . . . . . . . . . . .371 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .298 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . .366 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . .296 Airbag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Airbag Deployment . . . . . . . . . . . . . . . . . . . . . . . .52 Airbag Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 423 Autostick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238 Bulbs, Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .357 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . .332 Keyless Transmitter Replacement (RKE) . . . . . . . .18 Belts, Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 Body Mechanism Lubrication . . . . . . . . . . . . . . . . .
424 INDEX Child Restraint . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 Child Restraints Child Seat Installation . . . . . . . . . . . . . . . . . . . . .73 Install A LATCH-compatible Child Restraint . . . . .68 Installing Child Restraints Using The Vehicle Seat Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 Lower Anchors And Tethers For Children . . . . . . .64 Clean Air Gasoline . . . . . . . . . . . . . . . . . . . . . . . .294 Cleaning Wheels . . . . . . . . . .
INDEX 425 Dealer Service. . . . . . . . . . . . . . . . . . . . . . . . . . . .351 Defroster, Windshield . . . . . . . . . . . . . . . . . . . . . . .80 Diagnostic System, Onboard . . . . . . . . . . . . . . . . .349 Dipsticks Automatic Transmission . . . . . . . . . . . . . . . . . .379 Disposal Antifreeze (Engine Coolant) . . . . . . . . . . . . . . . .373 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Door Locks, Automatic . . . . . . . . . . . . . . . . . . . . . .
426 INDEX Exhaust Gas Caution . . . . . . . . . . . . . . . . . . . . .78 Filler Location Fuel . . . . . . . . . . . . . . . . . . . . . . . .157 Fails to Start . . . . . . . . . . . . . . . . . . . . . . . . . . .225 Filters Flooded, Starting . . . . . . . . . . . . . . . . . . . . . . .225 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . .356 Fuel Requirements . . . . . . . . . . . . . . . . . . . . . .293 Air Conditioning . . . . . . . . . . . . . . . . . . . . . . .360 Oil . . . . . . .
INDEX 427 Adding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .298 Additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296 Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .399 Clean Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294 Cutoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Filler Cap (Gas Cap) . . . . . . . . . . . . . . . . . . . . .157 Filler Door (Gas Cap) . . . . . . . . . . . . . . . . . . . .157 Gasoline . . .
428 INDEX Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Heated Mirrors. . . . . . . . . . . . . . . . . . . . . . . . . . . .93 Heated Seats. . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207 Hill Start Assist. . . . . . . . . . . . . . . . . . . . . . . . . . .251 Holder, Cup . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 429 Lead Free Gasoline . . . . . . . . . . . . . . . . . . . . . . . .293 Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Leaks, Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . .278 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . .148 Liftgate (Sedan) . . . . . . . . . . . . . . . . . . . . . . . . . . .
430 INDEX Lug Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .317 Modifications/Alterations, Vehicle . . . . . . . . . . . . . . .8 Monitor, Tire Pressure System . . . . . . . . . . . . . . . .283 Maintenance Free Battery. . . . . . . . . . . . . . . . . . . .357 Multi-Function Control Lever . . . . . . . . . . . . . . . . .111 Maintenance, General . . . . . . . . . . . . . . . . . . . . . .352 Maintenance Procedures . . . . . . . . . . . . . . . . . . . .352 New Vehicle Break-In Period .
INDEX 431 Filter Disposal . . . . . . . . . . . . . . . . . . . . . . . . .356 Identification Logo . . . . . . . . . . . . . . . . . . . . . .354 Materials Added to . . . . . . . . . . . . . . . . . . . . . .356 Recommendation . . . . . . . . . . . . . . . . . . . . . . .354 Synthetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . .356 Viscosity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .355 Oil Filter, Selection . . . . . . . . . . . . . . . . . . . . . . . .
432 INDEX Recorder, Event Data . . . . . . . . . . . . . . . . . . . . . . .55 Recreational Towing . . . . . . . . . . . . . . . . . . . . . . .300 Reformulated Gasoline . . . . . . . . . . . . . . . . . . . . .294 Refrigerant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .359 Release, Hood. . . . . . . . . . . . . . . . . . . . . . . . . . . .109 Reminder, Seat Belt. . . . . . . . . . . . . . . . . . . . . . . . .37 Remote Keyless Entry (RKE) FCC General Information . . . . . . . . . . . . . .
INDEX 433 Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . .101 Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 SENTRY KEY® FCC General Information . . . . . . . . . . . . . . . . . .15 Sentry Key (Immobilizer) . . . . . . . . . . . . . . . . . . . .13 Service Assistance . . . . . . . . . . . . . . . . . . . . . . . . .412 Service Contract . . . . . . . . . . . . . . . . . . . . . . . . . .414 Service Engine Soon Light (Malfunction Indicator) . .151 Service Manuals . .
434 INDEX Synthetic Engine Oil . . . . . . . . . . . . . . . . . . . . . . .356 Tachometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157 Temperature Control, Automatic (ATC) . . . . . . . . . .209 Temperature Gauge, Engine Coolant . . . . . . . . . . . .155 Tilt Steering Column . . . . . . . . . . . . . . . . . . . . . . .119 Tire and Loading Information Placard . . . . . . . . . . .264 TIREFIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .307 Tire Markings . . . . . . . .
INDEX 435 Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240 Traction Control . . . . . . . . . . . . . . . . . . . . . . . . . .251 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . . .299 Transaxle Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . .378 Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . .229 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . .
436 INDEX Wind Buffeting. . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Window Fogging . . . . . . . . . . . . . . . . . . . . . . . . .216 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Windshield Defroster . . . . . . . . . . . . . . . . . . . . . . .80 Windshield Washers . . . . . . . . . . . . . . . . . . . . . . .116 Windshield Wiper Blades . . . . . . . . . . . . . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
2014 FIAT 500 2014 OWNER’S MANUAL Chrysler Group LLC 14FF500-126-AC Third Edition Rev 1 Printed in U.S.A.
